• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.99-102
• /
• 2009

The recent LCD TV market has made efforts to produce thinner, brighter, and clearer products, and experienced the rapid light source replacement from a line source of light CCFL to a point source of light LED. In particular, LGP(Light Guiding Panel) among key parts composing BLU(Back Light Unit) has limits of the injection molding technology as well as the mold design, its processing and manufacturing technology so that it is hard to produce large LGP over 40 inch. To produce large light-guide panels over 40 inch under the injection molding process, a mold 3D model was developed in the design process before manufacturing a mold and structure unification was processed through CAE analysis. As a result, it was possible to construct the mold design process, and it is expected to manufacture the optimized mold by applying the mold design and manufacturing process of large-scale rapid injection-compression molding that will be produced in the future.

• 한국초등과학교육학회지:초등과학교육
• /
• 제35권3호
• /
• pp.326-335
• /
• 2016

The purpose of this study is to devise the concept of properties of the light on learning progressions for 3-6 grade students in the elementary school. For the purpose, this study creates a construct map of the properties of the light. Ordered multiple-choice items were developed in view of the construct map and presented to 200, 3~6 grade students in the elementary school. A partial credit model of Rasch model was used to analyze the results of those items, and the learning progressions was devised from the analysis results. The study can be summarized as follows: the construct modeling approach was used to devise the properties of light on learning progressions. As a result, the concept was selected for the core standards of construct map. Based on the construct map, the multiple-choice items were developed for students' conceptual understanding. The items were analyzed using the partial credit model, and the analysis findings showed that they were appropriate to assess students about their level of understanding of the properties of light. Finally, learning progressions were devised with the use of item analysis results.

• 한국진공학회지
• /
• 제17권3호
• /
• pp.211-214
• /
• 2008

Metal organic chemical vapor deposition (MOCVD)를 이용하여 사파이어 기판 위에 405 nm의 파장을 갖는 GaN light-emitting diode (LED)를 제작하였다. LED의 InGaN 활성층에서 생성되어 칩의 후면으로 향하는 광자를 전면으로 반사시키기 위하여, 사파이어 기판 후면에 반사막을 증착하였다. 반사막으로는 Al을 사용하였으며, 사파이어 기판에 대한 Al 박막의 접착력을 개선하기 위하여 사파이어 기판 후면에 Ti를 먼저 증착한 후에 Al을 증착하였다. Ti-Al 반사막을 채용한 결과, 광추출 효율이 52 % 향상되었다.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
• /
• pp.72-75
• /
• 2007

본 연구는 TFT-LCD 부품인 Back Light Unit의 광원 역할을 하는 CCFL Assembly 공정을 분석하여 최적의 공정원 배치를 할 수 있도록 하였다. 이에 각 공정의 특성을 파악하고, 이를 Herrmann의 두뇌우성을 적용하여 공정원 배치를 하도록 하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1339-1342
• /
• 2006

We focused on improving of the optical efficiency in the direct BLU. We could achieve the optical efficiency by reducing the thickness of BLU and processing the prism shapes on a reflection sheet. And we were able to reduce the Lamps.

• 전자공학회지
• /
• 제21권8호
• /
• pp.30-38
• /
• 1994

본고에서는 TFT LCD의 중요한 issue가 되고 있는 대형화와 full color 실현을 위해 저반사화 기술, 고개구율화 기술, 광시야각 기술 및 back light unit, color filter, 구동 IC등의 주요 핵심 부품 기술등의 최근 기술 동향 및 향후 나아갈 방향에 대하여 살펴보았다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 하계학술발표회 논문집
• /
• pp.347-348
• /
• 2008

언급한 바와 같이 사이즈별로 시장의 규모, 특징, 개발의 방향이 약간씩 달리하고 있으나 분명한 것은 공정단순화 및 광효율향상 포함한 원가절감을 위하여 기능성 시트들을 개발을 위한 활동이 활발하게 진행하고 있다. 광원은 중형이상의 경우 CCFL, EEFL이 주류를 이루고 있으나 초대형화, 고색재현, Local Dimming을 위한 LED 광원을 채택한 LED-BLU 개발을 활발히 진행 중이다.

• 대한치과교정학회지
• /
• 제24권4호
• /
• pp.969-982
• /
• 1994

This study was designed to investigate the stress distribution, intensity and force mechanism derived from the MEAW by photoelastic stress analysis of the artificial teeth and surrounding bone composed of photoelastic material(PL-3) The findings of this study were as follows, 1. In case of no elastic on the MEAW with tip back, the moderate stress was observed on the molar and canine area, and the light stress was observed on the other area. 2. In case of the vertical elastic on the plain A.W, and the MEAW without tip back, the great stress was observed on the lateral incisor area, but on the MEAW with tip back, the moderate stress was observed on the anterior area and molar area. 3. In case of the C III elastic on plain A.W., the stress was concentrated on the anterior area hanged by elastic but on the MEAW without tip back, the stress was transmitted equally from the anterior area to the posterior teeth area. On the MEAW with tip back, the great stress was observed on the anterior and molar area. 4. In case of the C III elastic on the plain A.W., the stress was concentrated on the posterior area hanged by elastic but on the MEAW without tip back, the stress was transmitted equally from the posterior area to the anterior area. On the MEAW with tip back, the great stress was observed on the posterior area and the moderate stress was observed on the anterior area.

• Safety and Health at Work
• /
• 제2권3호
• /
• pp.236-242
• /
• 2011

Objectives: To determine the feasibility of predicting static and dynamic peak back-compressive forces based on (1) static back compressive force values at the lift origin and destination and (2) lifting speed. Methods: Ten male subjects performed symmetric mid-sagittal floor-to-shoulder, floor-to-waist, and waist-to-shoulder lifts at three different speeds (slow, medium, and fast), and with two different loads (light and heavy). Two-dimensional kinematics and kinetics were captured. Linear regression analyses were used to develop prediction equations, the amount of predictability, and significance for static and dynamic peak back-compressive forces based on a static origin and destination average (SODA) backcompressive force. Results: Static and dynamic peak back-compressive forces were highly predicted by the SODA, with R2 values ranging from 0.830 to 0.947. Slopes were significantly different between slow and fast lifting speeds (p < 0.05) for the dynamic peak prediction equations. The slope of the regression line for static prediction was significantly greater than one with a significant positive intercept value. Conclusion: SODA under-predict both static and dynamic peak back-compressive force values. Peak values are highly predictable and could be readily determined using back-compressive force assessments at the origin and destination of a lifting task. This could be valuable for enhancing job design and analysis in the workplace and for large-scale studies where a full analysis of each lifting task is not feasible.

• 한국재료학회지
• /
• 제28권1호
• /
• pp.38-42
• /
• 2018

Continuous efforts are being made to improve the efficiency of Si solar cells, which is the prevailing technology at this time. As opposed to the standard front-lit solar cell design, the back-lit design suffers no shading loss because all the metal electrodes are placed on one side close to the pn junction, which is referred to as the front side, and the incoming light enters the denuded back side. In this study, a systematic comparison between the two designs was conducted by means of computer simulation. Medici, a two-dimensional semiconductor device simulation tool, was utilized for this purpose. The $0.6{\mu}m$ wavelength, the peak value for the AM-1.5 illumination, was chosen for the incident photons, and the minority-carrier recombination lifetime (${\tau}$), a key indicator of the Si substrate quality, was the main variable in the simulation on a p-type $150{\mu}m$ thick Si substrate. Qualitatively, minority-carrier recombination affected the short circuit current (Isc) but not the opencircuit voltage (Voc). The latter was most affected by series resistance associated with the electrode locations. Quantitatively, when ${\tau}{\leq}500{\mu}s$, the simulation yielded the solar cell power outputs of $20.7mW{\cdot}cm^{-2}$ and $18.6mW{\cdot}cm^{-2}$, respectively, for the front-lit and back-lit cells, a reasonable 10 % difference. However, when ${\tau}$ < $500{\mu}s$, the difference was 20 % or more, making the back-lit design less than competitive. We concluded that the back-lit design, despite its inherent benefits, is not suitable for a broad range of Si solar cells but may only be applicable in the high-end cells where float-zone (FZ) or magnetic Czochralski (MCZ) Si crystals of the highest quality are used as the substrate.