• Journal of the Korea Society of Computer and Information
• /
• v.7 no.2
• /
• pp.95-100
• /
• 2002

By feedback channel, the decoder reports the addresses of corrupted macroblocks induced by transmission errors back to the encoder With these negative acknowledgements, the encoder can make the next frame having propagated errors by using forward dependency based on GOBs and MBs of the frame happening transmission errors. The encoder can precisely calculate and track the propagated errors by examining the backward motion dependency for each of four comer pixels in the current encoding frame until before-mentioned the next frame. The error-propagation effects can be terminated completely by INTRA refreshing the affected macroblocks. Such a fast algorithm further reduce the computation and memory requirements. The advantages of the low computation complexity and the low memory requirement are Particularly suitable for real-time implementation.

• Steel and Composite Structures
• /
• v.35 no.3
• /
• pp.305-325
• /
• 2020

Beams of steel frame-tube structures (SFTSs) typically have span-to-depth ratios of less than five. This makes a flexural beam unsuitable for such an application because the plastic hinges at the beam-ends cannot be adequately developed. This leads to lower ductility and energy dissipation capacities of SFTSs. To address this, SFTSs with bolted web-connected replaceable shear links (SFTS-BWSLs) are proposed. In this structural system, a web-connected replaceable shear link with a back-to-back double channel section is placed at the mid-length of the deep beam to act as a ductile fuse. This allows energy from earthquakes to be dissipated through link shear deformation. SFTS and SFTS-BWSL buildings were examined in this study. Several sub-structures were selected from each designed building and finite element models were established to study their respective hysteretic performance. The seismic behavior of each designed building was observed through static and dynamic analyses. The results indicate that the SFTS-BWSL and SFTS have similar initial lateral stiffness and shear leg properties. The SFTS-BWSL had lower strength, but higher ductility and energy dissipation capacities. Compared to the SFTS, the SFTS-BWSL had lower interstory drift, base shear force, and story shear force during earthquakes. This design approach could concentrate plasticity on the shear link while maintaining the residual interstory drift at less than 0.5%. The SFTS-BWSL is a reliable resistant system that can be repaired by replacing shear links damaged due to earthquakes.

• Textile Coloration and Finishing
• /
• v.34 no.4
• /
• pp.241-249
• /
• 2022

As for military backpacks in Korea, utility backpack products equipped with various functions along with comfort and convenience are being developed. As a result, the volume and weight of the backpack increase, and many lightweight studies of the materials forming the backpack are being conducted. This study is a basic study on frame lightweight using fiber-reinforced composites to deal with aluminum, a back frame that maintains the shape of a backpack and provides stability when worn by combatants. As is known, only fiber-reinforced composites have sufficient light weight and mechanical properties, but the mechanical properties were reviewed by drilling holes to maximize the light weight. Tensile strength and flexural strength were measured by drilling 6mm, 12mm, 18mm, and 24mm holes, and the tensile strength and flexural strength were measured when 1, 3, 5, and 7 holes of 12mm were increased. As a result, even when the number of holes was increased, tensile strength did not change significantly, and the flexural strength showed to be higher in the case of 3 holes and 5 holes than in the case of 1 hole.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.2
• /
• pp.504-509
• /
• 2012

Automotive suspension mat is installed at seat back frame. As the back part of passenger is aupported by suspension mat, it is prevented from the pressure concentration. The tired feeling at driving is minimized and the comfortable feeling is increased. In this study, vibration and fatigue are analyzed with plastic suspension mat modelled by 3 Dimension. By the analysis result, the natural frequency becomes 30 Hz with life of $10^6$ cycle and safety factor of 1.6055. Development time and evaluation cost can be cut down by utilizing this analytical technique.

• Journal of the Korea Convergence Society
• /
• v.9 no.8
• /
• pp.155-160
• /
• 2018

Automotive seat is a part to supply the convenience and safety of driver at driving. Recently, the seat has the role to protect driver from the outside impact or vibration and give the convenience except such a usage as chair. The design on structural function of the seat frame is important like the impact safety and durability. In this study, the seat is designed by adding one hollow rod to the part of seat back frame in order to enhance the structural safety and durability. This study was carried out by using CATIA and ANSYS as the design and analysis programs. As this study result through the structural and vibrational analyses, model 4 was seen to have the durability more superior than the other models. By utilizing this result, it is thought to be the useful material at designing the automotive seat frame with durability. It is possible to be grafted onto the convergence technique at the automotive seat frame and show the esthetic sense.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.1
• /
• pp.173-191
• /
• 2002

The purpose of this study was defined efficient throw motion pattern to obtain the quantitative data and to achieve successful bowling through kinetic - kinematic variables on the throw motion. Subject of group composed of three groups : Higher bowlers who are two representative bowlers with 200 average points and one pro-bowler. Middle bowlers who are three common persons with 170 average points. Lower bowler who are three common persons with 150 average points. Motion analysis on throw motion in three groups respectively has been made through three-dimension cinematography using DLT method. Two high-speed video camera at operating 180 frame per secondary. One-way ANOVA has been used to define variable relations. Analyzed result and conclusion are the following : The displacement of back of the hand must have wider difference of each right-left displacement to increase the spin of the ball. In high bowlers group, difference between the front-rear position of back of the hand in case of success and that in case of failure in follow throw is 0.17m. That is to say, momentum in case of success come to increase greatly, compared with that in case of failure. To increase the spin of the ball, the potential difference should be narrower in follow through. In case of the high bowlers, the velocity of the front-rear direction of the back of the hand has been the fastest both in release and follow through, compared with those in other groups, which has contributed to increasing the spin force of the ball. The orders in the resultant velocity of the back of the hand has shown the this : the finger tip$\rightarrow$the back of the hand$\rightarrow$wrist.These orders made the proximal segment support the distal segment. The distal segment has provided the condition to accelerate the velocity. In case of failure, the suddenly increased velocity has caused the failure in the follow through. Acutely flexing the angle of the back of the hand has contributed to lifting to increase the spin of the ball.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.3
• /
• pp.1377-1389
• /
• 2016

This paper presents a target model update scheme for the mean-shift tracking with background weighted histogram. In the scheme, the target candidate histogram is corrected by considering the back-projection weight of each pixel in the kernel after the best target candidate in the current frame image is chosen. In each frame, the target model is updated by the weighted average of the current target model and the corrected target candidate. We compared our target model update scheme with the previous ones by applying several test sequences. The experimental results showed that the object tracking accuracy was greatly improved by using the proposed scheme.

• Journal of Biomedical Engineering Research
• /
• v.35 no.2
• /
• pp.19-25
• /
• 2014

According to recent data more than 80% of people suffer from back pain, due to an aging and a poor posture, at least once in their life time, and 7~10% of them have chronic spine illness. Researchers over the years have studied on various spinal traction devices that utilize the force of traction, and have also reported clinical test results. However, most existing devices are too complicated and too expensive. In order to solve these problems, we have developed a new device in which the frame moves up and down and at the same time tilting angle of the frame is adjusted. We have analyzed the forces applied on the body as a function of tilting angle. And the result shows that the new device has achieved the force of traction, which is known to be effective for spinal rehabilitation.

• Journal of Information Processing Systems
• /
• v.13 no.4
• /
• pp.818-833
• /
• 2017

This paper introduces a new algorithm that renders motion blur using triangular motion paths. A triangle occupies a set of pixels when moving from a position in the start of a frame to another position in the end of a frame. This is a motion path of a moving triangle. For a given pixel, we use a motion path of each moving triangle to find a range of time that this moving triangle is visible to the camera. Then, we sort visible time ranges in the depth-time dimensions and use bitwise operations to solve the occlusion problem. Thereafter, we compute an average color of each moving triangle based on its visible time range. Finally, we accumulate an average color of each moving triangle in the front-to-back order to produce the final pixel color. Thus, our algorithm performs shading after the visibility test and renders motion blur in real time.

• Transactions on Control, Automation and Systems Engineering
• /
• v.4 no.1
• /
• pp.9-16
• /
• 2002

In this paper, we intend to demonstrate a new intuitive force-feedback device for advanced VR applications. Force feed-back for the device is tension based and is characterized by 7 degrees of freedom (DOF); 3 DOF for translation, 3 DOF for rotation, and 1 DOF for grasp). The SPIDAR-G (Space Interface Device for Artificial Reality with Grip) will allow users to interact with virtual objects naturally by manipulating two hemispherical grips located in the center of the device frame. We will show how to connect the strings between each vertex of grip and each extremity of the frame in order to achieve force feedback. In addition, methodologies will be discussed for calculating translation, orientation and grasp using the length of 8 strings connected to the motors and encoders on the frame. The SPIDAR-G exhibits smooth force feedback, minimized inertia, no backlash, scalability and safety. Such features are attributed to strategic string arrangement and control that results in stable haptic rendering. The design and control of the SPIDAR-G will be described in detail and the Space Graphic User Interface system based on the proposed SPIDAR-G system will be demonstrated. Experimental results validate the feasibility of the proposed device and reveal its application to virtual reality.