• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.1
• /
• pp.71-75
• /
• 2000

The genetic makeup could be the most important among many factors affecting yield and quality of tobacco(Nicotiana tabacum L.). The mammoth gene found in N. tabacum is associated with greater leaf number and poor leaf quality. This study was carried out to obtain the basic information about the inheritance of mammoth gene and white flower color. Two flue-cured breeding lines, KF 9373-2 and KF 8832-85, F$_1$, F$_2$, two parents backcrossed with F$_1$, and F$_3$ lines derived from cross of above two lines were investigated for flowering type(mammoth gene) and flower color. All plants of F$_1$ population revealed normal flowering type and pink flower color. The progeny of F$_2$ generation was segregated into the phenotypic ratio of 9 : 3 : 3 : 1 with normal flowering type and pink flower color, normal and white, non flowering type(NF) and pink, and NF and white, respectively. Among the progenies of back-crossing populations, the flowering type showed a segregation ratio of 1 : 1 as normal and NF in BP$_1$ and flower color did also 1 : 1 as pink and white in BP$_2$. All lines have the mammoth gene in F$_3$. that were selected in F$_2$ progeny as non flowering. But 9 lines among 14 were segregated with 3 : 1 as pink and white flower in F$_3$. which were selected in F$_2$ as pink flower color. These results indicated that the characters of mammoth gene and white flower were controlled by a pair of recessive genes, respectively.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.1
• /
• pp.9-18
• /
• 2007

This paper proposes the modeling of sensorless drive system using 120 degree conduction method for IPM (Interior Permanent Magnet) BLDC motors and analyzes characteristics of the terminal voltage that is used to detect the rotor position. This paper shows that the ZCP (Zero-Crossing Point) of the measured terminal voltage used In sensorless control is ahead of that of the back EMF of IPM motors because they have a saliency. This research also analyzes that the amount of position detection error is related to saliency, rotor speed, and load condition. In addition, this paper shows that motors have bigger advance angles than we have expected because the ZCP of terminal voltage precedes the actual ZCP, and under operation conditions such as heavy load and high speed it may generate abnormal currents that flow toward opposite direction after phase current becomes zero.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.3
• /
• pp.42-59
• /
• 2014

Han Pilgyo (1807~1878) was a scholar-official in the later period of the Joseon Dynasty. The research results on spatial structure and landscape techniques of the central government office reviewed through the Sukcheonjeado(宿踐諸衙圖) album collection edited by Han Pilgyo are as follows. First, Sukcheonjeado(宿踐諸衙圖) using Sabangjeondomyobeob(四方顚倒描法, a Korean traditional drawing type) is uniquely proven historical data which helps to understand the spatial structure of the center and local government offices and the characteristics of cultural landscape. Secondly, the central government office located in Yookcho(六曹) Street which is the outside Gwanghwamun(光化門) of the Main Palace(Gyeongbokgung, 景福宮) of the Joseon Dynasty has a center facility(Dangsangdaecheong, 堂上大廳) and attached buildings which are distributed from high to low or from left to right, according to its order of presidency in square-shaped portion of land. The main building was located facing south and by considering the administrative convenience, the environmental effect and the practice of Confucian norms this structure reflects a hierarchical landuse system. Thirdly, the main buildings such as Dangsangdaecheong and Hyangcheong(鄕廳), which are the working place for government officials had large square front yards for constructing a practical patio garden. The back garden was tended to reflect the meaning landscape, with such as pond and pavilion. A particular point was the repeated crossing of active space and passive space(movement and stillness, building and yard, yard and garden), which implements the Yin-Yang principle. Fourth, the characteristics that can be extracted from the central government office landscapes are (1) expandability of outdoor space, connects of front gardens, emphasizes the characteristic of serviceable gardens and back gardens, which in turn emphasizes scenic sides, (2) introduction of water features(square-shaped ponds) that can be used as fire-water and considers environmental-amenity and landscape characteristics, (3) introduction of pavilions for relaxation, mental and physical discipline, and the development of back gardens, (4) significance of Jeongsimsoo(庭心樹) in such things as selection of concise landscape plants like lotus, willow, pine, zelkova and so on, and limited plant introduction, (5) environmental design techniques which set importance on not only aesthetics and ideality but also practical value. Thus, these aspects of the government office landscape can be said to be the universality and particularity of Korean traditional landscape technique and can be extracted similarly in the palaces, temples, lecture halls, and houses of the upper class of the Joseon Dynasty.

• Korean Journal of Plant Resources
• /
• v.30 no.4
• /
• pp.475-480
• /
• 2017

A new Gomchwi cultivar 'Damogy ' was bred by crossing between Gomchwi (Ligularia fischeri (Ledeb.) Turcz.) and Handaeri-gomchwi (Ligularia fischeri var. spiciformis Nakai). The selection and investigation of growth and yield characteristics were conducted from 2006 to 2011 in field and greenhouse of Highland Agriculture Research Institute, NICS, Rural Development Administration, Korea. On a newly developed cultivar 'Damogy', Color of petiole ear was purple, petiole trichome was exist, light of leaf back was not exist, and density of leaf vein was degree 4. Plant height, leaf length, leaf width and petiole length were 45.9, 16.9, 21.1 and 29.0 cm, respectively in the $3^{rd}$ year in growth characteristics. Plant size was also higher than that of Gondalbi. Bolting and flowering time were Aug. $23^{th}$ and Sept. $10^{th}$, respectively. In contrast, Gondalbi showed quite earlier bolting time more than 38 days compared with 'Damogy' and consequently earlier flowering time more than 26 day. 'Damogy' showed similar leaf number (129) per plant compared to 'Gondalbi' (130). Furthermore, yield was higher 'Damogy' (1,889 g/plant) than in 'Gondalbi' (798 g/plant). 'Damogy' showed higher leaf thickness (0.71 mm) than 'Gonalbi' (0.46 mm), and consequently showed more hardness in leaf characteristics ($28.3kg/cm^2$) compared with 'Gondalbi' ($23.0kg/cm^2$). 'Damogy' showed higher resistance in the susceptibility of powdery mildew disease compared to 'Gondalbi'. 'Damogy' variety was registered plant variety protection right as a No. 89 on December 2015.

• The KIPS Transactions:PartB
• /
• v.15B no.4
• /
• pp.275-284
• /
• 2008

With increases in recent security requirements, biometric technology such as fingerprints, faces and iris recognitions have been widely used in many applications including door access control, personal authentication for computers, internet banking, automatic teller machines and border-crossing controls. Finger vein recognition uses the unique patterns of finger veins in order to identify individuals at a high level of accuracy. This paper proposes new device and methods for touchless finger vein recognition. This research presents the following five advantages compared to previous works. First, by using a minimal guiding structure for the finger tip, side and the back of finger, we were able to obtain touchless finger vein images without causing much inconvenience to user. Second, by using a hot mirror, which was slanted at the angle of 45 degrees in front of the camera, we were able to reduce the depth of the capturing device. Consequently, it would be possible to use the device in many applications having size limitations such as mobile phones. Third, we used the holistic texture information of the finger veins based on a LBP (Local Binary Pattern) without needing to extract accurate finger vein regions. By using this method, we were able to reduce the effect of non-uniform illumination including shaded and highly saturated areas. Fourth, we enhanced recognition performance by excluding non-finger vein regions. Fifth, when matching the extracted finger vein code with the enrolled one, by using the bit-shift in both the horizontal and vertical directions, we could reduce the authentic variations caused by the translation and rotation of finger. Experimental results showed that the EER (Equal Error Rate) was 0.07423% and the total processing time was 91.4ms.

• Korean Journal of Veterinary Service
• /
• v.33 no.4
• /
• pp.375-385
• /
• 2010

An investigation was conducted to evaluate the effects of supplementing Alisma canaliculatum, Viscum album and Cornus officinalis probiotics on the growth performance and immune response in growing pigs. This experiment was conducted using 120 pigs (crossing of Landrace${\times}$Yorkshire and castrated) which were assigned to 5 treatments in 3 replications with 8 pigs per replications. The dietary treatments were NC group (without antibiotics), PC group (basal+Oxytetracycline 50ppm), AC group (basal+A. canaliculatum 0.5%), VA group (basal+V. album 0.5%) and COP group (basal+C. officinalis probiotics 0.5%). The initial body weights of pigs were 35kg on average and the experiment lasted for 9 weeks. The experimental animals were kept in the pens following a completely randomized design. They were provided the diets adequate for grower stage as recommended by NRC (ME:3,265 kcal/kg and CP:16%). COP fed pigs showed lower weight gain up to 6 weeks of age compared to NC group and other groups without significant differences (P>0.05). The carcass weights of pigs fed VA and COP were significantly higher compared to NC group (P<0.05), Back fat thicknesses groups fed three different additives were higher than NC group and lower then PC group (P<0.05). Crude fat contents in loin meat were significantly lower in groups fed three different additives while moisture contents of those three groups were higher than other groups (P<0.05). The thiobarbituric acid reaction substance (TBARS) value measured at fresh and $2^{nd}$ weeks was lower in additives fed groups but no statistical differences were observed among the treatments (P>0.05). Significantly highest PUFA (16.42g/100g) and ${\omega}$-3 fatty acids (ALA, EPA and DHA) content of meat were observed in COP fed pigs compared to NC group (P>0.05), which might mean that three additives function to enhance serum IgG in pigs. In consequence, it can be suggested that AC, VA and COP may have a potential to replace antibiotics as growth promoter and immune enhancer in the diets for growing pigs.

• Journal of Navigation and Port Research
• /
• v.40 no.6
• /
• pp.385-390
• /
• 2016

ELoran Systems can provide Position, Navigation, and Time services with comparable performance to Global Positioning Systems (GPS) as a back up or alternative system. High timing and navigation performance can be achieved by eLoran signals because eLoran receivers use "all-in-view" reception. This incorporates Time of Arrival (TOA) signals from all stations in the service range because each eLoran station is synchronized to Coordinated Universal Time (UTC). Transmission station information and the differential Loran correction data are transmitted via an additional Loran Data Channel (LDC) on the transmitted eLoran signal such that eLoran provides improved Position Navigation and Timing (PNT) over legacy Loran. In this paper, we propose a technique for adapting the delay time compensation values in eLoran timing receivers to provide precise time comparison. For this purpose, we have designed a system that measures time delay from the crossing point of the third cycle extracted from the current transformer at the end point of the transmitter. The receiver delay was measured by connecting an active H-field, an E-field and a passive loop antenna to a commercial eLoran timing receiver. The common-view time transfer technique using the calibrated eLoran timing receiver improved the eLoran transfer time. A eLoran timing receiver calibrated by this method can be utilized in the field for precise time comparison as a GNSS backup.

• Korean Journal of Plant Resources
• /
• v.34 no.4
• /
• pp.339-345
• /
• 2021

'Gondalbi' (Ligularia stenocephala (Maxim.) Matsum. & Koidz.) is the most cultivated Gomchwi species because of higher yield and low in aromatic flavor and bitter taste, But 'Gondalbi' is susceptible to powdery mildew disease and leaf shriveling after harvest in Summer. To improve powdery mildew disease resistance and post-harvest leaf shriveling problem in 'Gondalbi', 'Handeari-gomchwi' resistant to powdery mildew disease and having higher yield potential used as a paternal trait donor. Powdery mildew disease resistance and post-harvest leaf shriveling as well as agronomic performance of a new variety, 'Greenbear' were tested under field and green house conditions in Pyungchang, Korea from 2007 to 2016. Expression of both maternal and paternal characteristics in 'Greenbear' including purple colored petiole ears, glossy leaf and paternal, petiole trichome, absent at the back of a leaf were confirmed. Plant size and flowering time of 'Greenbear' were similar to check line, 'Gommany', while leaf number per plant and yield were higher in 'Greenbear'. 'Greenbear' has thinner leaves (0.66mm) compared to 'Gommany (0.69 mm)', and hardness appeared slightly higher in 'Greenbear(25.1 kg/cm²)'. The resistance to powdery mildew disease of the 'Greenbear' variety was slightly lower than that of the 'Gommany' variety, but somewhat showed high resistance.

• (The) Research of the performance art and culture
• /
• no.43
• /
• pp.173-202
• /
• 2021

During the Korean War, China dispatched 'the Anti-US and Pro-Joseon Comfort' group to North Korea 3 times. The purpose of the comfort group was to comfort the Chinese People's Supporting Soldiers and Joseon People's Army fighting the US imperial forces and at the same time, inform them of China's situation to booster their morale. Another purpose was to promote the socialism construction projects in the new China. Namely, China wanted to propagate various heroic achievements of the Chinese soldiers and accuse the US imperialist soldiers and thereby, inspire Chinese people's international sense and patriotism for the new China to mobilize the people for the war and promote the construction of the new China effectively. The comfort group consisted of diverse classes (laborers, farmers, intellectuals, women, students, soldiers, etc.) in various areas such as politics, military, ethnic, society, culture, education, etc. Their activities were conducted in various forms such as consolation, legwork, meeting and performances. Their activities were full of anger and compassion, sacrifice and emotion, battle and romance, impression and comfort. Such emotion was delivered intact to the Chinese people through the comfort group's propaganda activities back home in China. The Anti-US and Pro-Joseon Comfort' group revealed their identity of socialists New China in terms of their organization and their specific performances. Their identity claimed for democracy and equality, internationalism empathizing world peace and solidarity of the proletariats, and patriotism supporting the communists regime. The comfort group played a role in propagating such identity of new China effectively by crossing the border. It was a political and cultural performance that stipulated the political meaning of the Anti-US and Pro-Joseon Chosun Comfort' group

• Journal of architectural history
• /
• v.3 no.1
• /
• pp.83-99
• /
• 1994

Ch'ang-Ts'al-Ts'un is a rural Village near Lung-jing City in Yen-pien Korean Autonomous Province of China. It was formed about 100 years ago by Korean Immigrants and has been developed maintaing the characteristics of traditional Korean architecture. Therefore investigating the spatial structure of this village is a meanigful work to confirm and explore one branch of Korean architecture. This study aims at analyzing the spatial structure of the village using direct data collected from the field work and indirect data from books and maps. The field work consists of on-the-site survey of the village layout, interviews of residents, observation notes and photography. Ch'ang-Ts'ai-Ts'un is located 360-370 m high above the sea level and at the side of a long valley. A river flows in the middle of the valley and relatively flat arable land exists at the both sides of the river. The location of the village related to the surrounding river and mountains suggests that the site of the village was chosen according to Feng-Shui, Chinese and Korean traditional architectural theory. The main direction of the house layouts is South-western. The village has been growing gradually until today. Therefore it is meaningful to make the village layout before Liberation(1946 A.D.) because the characteristics of Korean architecture prevailed more in that period. The area of the previous village is limited to the west side of the creek. New houses were later added to the east of the creek, forming a 'New Village'. Previously the village was composed of 3 small villages: Up, Middle and Down. Also the main access roads connecting the village with the neighboring villages were penetrating the village transversely. Presently the main access road comes to the village longitudinally from the main highway located in front of the village. The retrospective layout shows the existence of well-formed Territory, Places and Axes, thus suggesting a coherent Micro-cosmos. The boundary of imaginery territory perceived by present residents could be defined by linking conspicous outside places sorrounding the village such as Five-mountains, Front-mountain, Shin-dong village, Standing-rock, Rear-mountain and Myong-dong village. Inside the territory there are also the important places such as Bus-stop, Memorial tower of patriots, Road-maitenance building and the village itself. And inside it 5 transverse and 1 longitudinal axes exist in the form of river, roads and mountains. The perceived spatial structure of the village formed by Places, Axes and Territory is geometrical and well-balanced and suggests this village is fit for human settlement. The administrative area of the village is about 738 ha, 27 % of which is cultivated land and the rest is mountain area. Initially the village and surrounndings were covered with natural forest But the trees have been gradually cut down for building and warning houses, resulting in the present barren and artificial landscape with bare mountains and cultivated land. At present the area of the village occupied by houses is wedge-shaped, 600 m wide and 220 m deep in its maximum. The total area of the village is $122,175m^{2}$. The area and the rate of each sub-division arc as follow. 116 house-lots $91,465m^{2}$ (74.9 %) Land for public buildings and shops $2,980m^{2}$ (2.4 %) Roads $17,106m^{2}$ (14.0 %) Creek $1,356m^{2}$ (1.1 %) Vacant spaces and others $9,268m^{2}$ (7.6 %) TOTAL $122,175m^{2}$ (100.0 %) Each lot is fenced around with vertical wooden pannels 1.5-1.8 m high and each house is located to the backside of the lot. The open space of a lot is sub-divided into three areas using the same wooden fence: Front yard, Back yard and Access area. Front and back yards are generally used for crop-cultivation, the custom of which is rare in Korea. The number of lots is 116 and the average size of area is $694.7m^{2}$. Outdoor spaces in the village such as roads, vacant spaces, front yard of the cultural hall, front yard of shops and spacse around the creek are good 'behavioral settings' frequently used by residents for play, chatting, drinking and movie-watching. The road system of the village is net-shaped, having T-junctions in intersections. The road could be graded to 4 categories according to their functions: Access roads, Inner trunk roads, Connecting roads and Culs-de-sac. The total length of the road inside the village is 3,709 m and the average width is 4.6 m. The main direction of the road in the village is NNE-SSE and ESE-WNW, crossing with right angles. Conclusively, the spatial structure of Ch'ang-Ts'ai-Ts'un village consists of various components in different dimensions and these components form a coherent structure in each dimension. Therefore the village has a proper spatial structure meaningful and appropriate for human living.