• Journal of the Korean Geotechnical Society
• /
• v.32 no.11
• /
• pp.5-19
• /
• 2016

This paper presents the results from three-dimensional finite element (FE) analysis undertaken to provide insight into the lateral behaviors of piled gravity base foundation (GBF) for offshore wind turbine. The piled GBF was originally developed to support the gravity based foundation in very soft clay soil. A GBF is supported by five piles in a cross arrangement to achieve additional vertical bearing capacity. This study considered four different cases including a) single pile, b) three-by-three group pile (with nine piles), c) cross-arrangement group pile (with five piles), and d) piled GBF. All the cases were installed in homogenous soft clay soil with undrained shear strength of 20 kPa. From the numerical results, p-y curves and thus P-multiplier was back-calculated. For the group pile cases, the group effect decreased with increasing the number of piles. Interestingly, for the piled GBF, the P-multipliers showed a unique trend, compared to the group pile cases. This study concluded that the global lateral behaviour of the piled GBF was influenced strongly by the interaction between GBF and contacted soil surface.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.205-208
• /
• 2015

Large vessels are currently operating by using an ECDIS, a system enabling automatic navigation and checking marine conditions. In the past, the ECDIS was used for vessels but in these days, it has been used as a method for collecting and verifying marine information, etc. from land by using a computer, instead of taking a boat out. The ECDIS on sale is generally used by companies which operate marine workers. However, this system has caused inconvenience to marine workers, in terms of tasks, services, or operations. Marine workers move out to the sea after checking the status of the system at the office. Due to the weather such as waves and winds, marine devices are not often found on the relevant coordinates. In such a case, the workers onerously need to come back to the land and track the marine devices again. In order to solve such a problem, this thesis purposes to develop a system which can check the locations of marine devices and verify a marine chart even on the sea by using a mobile. The proposed system can integrate and support a variety of protocols of relevant devices in the system itself and check data via mobile through the data transmission and streaming functions.

• Journal of National Security and Military Science
• /
• s.8
• /
• pp.1-48
• /
• 2010

The purpose of this study is to examine and analyze the Untied Nations' efforts for peace on Korean peninsular after CCF's participation in Korean War. The Untied Nation tried to negotiate th peace plan between two sides from the end of 1950. Once the CCF's entry into the war had been confirmed, the war situation moved to a new phase, and the UN forces, which had guided the war in an effort to destroy the NKP A forces, and to punish North Korea, had to set up new guidelines to cope with the new situation. Accordingly, in late November, 1950, the UN forces camp, mainly the US Joint Chiefs of Staff and the United Nations Command, discussed various options, such as an expansion of the war up to the Chinese territory, a cease fire along the 38th Parallel, or a forced and inevitable evacuation. The Korean delegation to the UN insisted that "the unification of Korea should be achieved only by victory in the war. The Chinese intervention in the war is a Challenge to the UN in the same way as the North Korean invasion. The UN participation in the war was to repulse the invasion. With the same spirit we should drive back the Chinese Communists." The Korean delegation also emphasized to the friendly nations the political objective and will of unification, and that a cease fire at a threshold of unification might return us to the status quo ante bellum, and would be contrary to the Korean nation's desire. At that time, particularly, the US strongly considered the employment of nuclear weapons as one of the new strategies to cope with the Chinese invasion. The international effects of these casual remarks were realized almost at once. The British Prime Minister who had not wanted the expansion of war in the Far East, especially from the view point of the interest of NATO's security, visited Washington. so the conference had a very important meaning for the UN forces' new strategy. On the other hand, at the UN, on the 5th of December, the very day Truman and Attlee agreed to seek a cease-fire under UN auspices, a group of thirteen Asian and Arab states proposed to ask China and North Korea not to cross the 38th Parallel, and sounded out both sides about a cease fire along the 38th Parallel. The United States and the United Kingdom gave their assent, but China and North Korea gave no direct response. The CCF, who were securing the initiative of operation, were not agreeable with the proposal of the UN forces. The Untied Nation has tried to negotiate th peace plan between two sides from the December of 1950 and January of 1951. The Untied Nations' has achieved great results to negotiate for the peace plan on Korean peninsular after CCF's participation in Korean War. It's the results considering both the operation situation and political opinions.

• Journal of Gifted/Talented Education
• /
• v.15 no.1
• /
• pp.11-36
• /
• 2005

Cooperative teaching emerged as one of the interesting topics on curriculum administration and teaching-learning method in BSA(Busan Science Academy). The purpose of this study is to do research on social studies learning with respect to cooperative teaching, and to develop the model of cooperative teaching. The results of this study are as follows: First, We surveyed both the concept of cooperative teaching in all aspects and the methodological application on cooperative teaching. Second, We searched all teaching-learning methods in BSA in terms of cooperative teaching. Third, We studied cooperative teaching system on social studies considering current environmental factors. Forth, We performed seminar class which is constructed as one of the cooperative teaching models. The topic of seminar was 'The distortion and falsification of Koguryeo history in China'. The participants of seminar were volunteer students and social studies teachers whose subjects were geography, history, social studies, and ethics. And the participants conducted the research and cooperative learning based on teacher's subjects and subtopics. Fifth, The interactions between teacher and teacher, student and student, and teacher and student in the process of seminar preparation and publication were conducted very excitedly. Especially we found the possibility of cooperative teaching by the interaction between teachers. Finally, students developed the mind-frame to participate in social studies learning actively, and learned the method to research social affairs for themselves, and extended the eyes to approach social affairs with different opinions.

• Journal of the Economic Geographical Society of Korea
• /
• v.12 no.4
• /
• pp.681-701
• /
• 2009

There were three banks that had the head office in Busan since 1912, Gyong-Nam Bank, Dong-Rae Bank and Busan Commercial Bank. This article tries to catch hold of the characteristics of the establishment and management, and the merging process of three banks. The main stockholders and managers made use of the money of the banks for the enterprises that they operated. Gyong-Nam Bank was combined with Dae-Gu Bank in 1928 to be Dae-Gu Commercial & Industrial Bank. The revised bank ordinance of 1928 regulated that the head office banks had to meet the requirement of the paid-in capital, 2 million yen. Not meeting such an excessive requirement, Dong-Rae Bank was amalgamated to Ho-Nam Bank of Gwang-Ju in 1933. Busan Commercial Bank was absorbed in Cho-Sun Commercial Bank in 1935 because it couldn't get back huge loan from a company which belonged to its three main stockholders. Japanese were already the main stockholders of Cho-Sun Commercial Bank from the beginning of 1920s. The banking agencies were not able to deal with the economic fluctuations effectively, and didn't have any economic organization in support of their profit. Cho-Sun Government-General forced the head office banks to be merged to control the colonial economy.

• Journal of Biomedical Engineering Research
• /
• v.19 no.5
• /
• pp.469-476
• /
• 1998

In the case of acquisition and displaying medical Images such as ultrasonography and endoscopy on VGA monitor of PC system, image degradation of tear-drop appears through scan conversion. In this study, we compare several methods which can solve this degradation and implement the hardware system that resolves this problem in real-time with PC. It is possible to represent high quality image display and real-time processing and acquisition with specific de-interlacing device and PCI bridge on our hardware system. Image quality is improved remarkably on our hardware system. It is implemented as PC-based system, so acquiring, saving images and describing text comment on those images and PACS networking can be easily implemented.metabolism. All images were spatially normalized to MNI standard PET template and smoothed with 16mm FWHM Gaussian kernel using SPM96. Mean count in cerebral region was normalized. The VOls for 34 cerebral regions were previously defined on the standard template and 17 different counts of mirrored regions to hemispheric midline were extracted from spatially normalized images. A three-layer feed-forward error back-propagation neural network classifier with 7 input nodes and 3 output nodes was used. The network was trained to interpret metabolic patterns and produce identical diagnoses with those of expert viewers. The performance of the neural network was optimized by testing with 5~40 nodes in hidden layer. Randomly selected 40 images from each group were used to train the network and the remainders were used to test the learned network. The optimized neural network gave a maximum agreement rate of 80.3% with expert viewers. It used 20 hidden nodes and was trained for 1508 epochs. Also, neural network gave agreement rates of 75~80% with 10 or 30 nodes in hidden layer. We conclude that artificial neural network performed as well as human experts and could be potentially useful as clinical decision support tool for the localization of epileptogenic zones.

• Journal of the Korean association of regional geographers
• /
• v.3 no.1
• /
• pp.99-113
• /
• 1997

The purpose of this study is to find out about the cause and adaptation process of urban households going to rural areas for agricultural management(Kwihyang nongga) through the microscopic analysis of a case study. Research results are summarized in the followings. The cause of Kwihyang nongga before the 1980s was generally due to the social causes like the support of dependent family or rural-to-urban migrants' maladjustment in urban society. After the 1980s, however, it was related to the economic reasons such as the increase of households' income by commercial agriculture more than the social ones. Most of Kwihyang nongga was traditionally the households which came back to their native places, rural areas. Recently the urban households which did not originally come from rural areas are going to rural space because of the cultivation of high profit oriented agricultural products. Recent Kwihyang nongga increased the size of commercial agriculture through leased farmland, not by a purchase of agricultural land. Even though the number of Kwihyang nongga is now a few, it is expected that the influence of Kwihyang nongga on rural society will be various and high because it consists of young generation. The increase of Kwihyang nongga may be one of the ways to mitigate the decreasing rate of utilization of agricultural lands due to the labor shortage of rural areas after industrialization. To solve rural problems related to underpopulation, it is necessary to establish the active plicies of helping Kwihyang nongga. The actions for Kwihyang nongga ought to emphasize the improvement of educational conditions and living facilities as well as financial aids and the improvement of farming conditions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.3_4
• /
• pp.407-417
• /
• 2003

The purpose of this study is to develop designs and patterns of a functional brassiere. For this purpose, women who have protruding and drooping breasts with 75B for their brassiere size were sampled. The fitting test for the fitness and function of test brassiere and control brassiere were carried out twice and compared the results from the both in terms of front, rear and side looks. The results of this study can be summarized as follows; 1. The results from measuring the level of sag and spread, and volume and protrusion of breasts shows that there are some distinctive differences in the measurements before and after wearing the test brassiere and the test brassiere is proved to be very effective in correcting breasts' shapes. 2. Front look: Since the two front cutting lines of the test brassiere served to have the curved main part pressing against the breasts, it could support breasts to more than satisfactory level. In addition, upperline panel and side panels of the test brassiere were found to have the upperline of the upper cup pressed against the breasts and at the same time it pressed and gathered the flab around upper part of the breasts and armpits that helped to rearrange the shape of the breasts. It is also proved that the two-pieced test brassier was found to be more functional in supporting the lower cup of the breasts. 3. Rear look: The test brassier was made up of two wide U-shaped wings with 2.5cm tape on its lower sides. Each wing has 4 lines and 3 hems (5.5cm). For this reason, the test brassiere was tighter and better fitted on its back. 4. Side look and entire look: The wings of the test brassiere might look wider than that of the control brassier which has conventional straight-shaped wings, but it was analyzed that the test brassiere held the upper and lower sides of the wings more effectively to be more pressed against the breast. Therefore, the test brassiere scored higher in terms of adjusting to body movements, while the control brassiere looked better in overall terms. 5. The functional brassier fur protruding and drooping breasts developed from the experiments of this study is a full side stretch brassiere which covers the entire breasts satisfactorily. The pattern drafting methods are suggested in to .

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.21-30
• /
• 2005

The purpose of this study is helps to make full use for perfect performance by grasping the defects of Tichonkich motion performed by athlete CSM For this, the study analyzed kinematical variables through Tichonkich motions performed at the first selection competition(1st trial) and final selection competition(2nd trial) for the dispatch to the 28th Athens Olympic Games using the three-dimensional cinematographical method with a high-speed video camera, and obtained the following results. 1. During Tichonkich motion, the execution time of up swing and the right hand moving to the left bar was shorter in the 2nd trial than the 1st one, while the execution time of down swing, the support of the left bar and the right hand moving to the right bar was longer in the 2nd trial than the 1st trial. 2. The horizontal position of COG in the 2nd trial was -35cm in the 1st stage, 42cm in the 3rd stage and 29cm in the 4th stage, that is, it showed a great swing focused on the circular movement compared to the 1st trial, while the vertical position of COG was -59cm in the 2nd stage, that is, it showed a small swing focused on a up and down movement. Also the 5th stage vertical position was 98cm, and the 6th stage vertical position was 95cm in the 2nd trial which were higher than those of the 1st trial, so it has provided magnificence required in the modern gymnastics. 3. And it was indicated that the horizontal velocity at the down swing phase proceeded forward more rapidly in the 2nd trial than that in the 1st trial, and the reverse ascent made a rapid vertical rise lessening left and right velocity change. And in the 5th stage, the 2nd trial was kept very slower in horizontal, vertical and left and right velocity that in the 1st trial, so it reached a handstand with leisurely movement. 4. In the 2nd trial, shoulder joint of the 1st, 2nd, 3rd stages kept a larger angle than that in the 1st trial, that is, it made a great swing while in the 1st trial, it showed a swing movement dependent on kick movement by the flexion and extension of hip joint. Also in the 2nd trial, the body formed a vertical posture with both hands supporting the left bar and hip joint was kept larger as $198^{\circ}$ and $190^{\circ}$ in the 5th and 6th stage than that in the 1st trial, so it made a handstand with the body uprightly stretched out, and magnificent and stable movement.

• Nuclear Engineering and Technology
• /
• v.39 no.1
• /
• pp.31-42
• /
• 2007

Energy supply is increasingly showing up as a major issue for electricity supply, transportation, settlement, and process heat industrial supply including hydrogen production. Nuclear power is part of the solution. For electricity supply, as exemplified in Finland and France, the EPR brings an immediate answer; HTR could bring another solution in some specific cases. For other supply, mostly heat, the HTR brings a solution inaccessible to conventional nuclear power plants for very high or even high temperature. As fossil fuels costs increase and efforts to avoid generation of Greenhouse gases are implemented, a market for nuclear generated process heat will be developed. Following active developments in the 80's, HTR have been put on the back burner up to 5 years ago. Light water reactors are widely dominating the nuclear production field today. However, interest in the HTR technology was renewed in the past few years. Several commercial projects are actively promoted, most of them aiming at electricity production. ANTARES is today AREVA's response to the cogeneration market. It distinguishes itself from other concepts with its indirect cycle design powering a combined cycle power plant. Several reasons support this design choice, one of the most important of which is the design flexibility to adapt readily to combined heat and power applications. From the start, AREVA made the choice of such flexibility with the belief that the HTR market is not so much in competition with LWR in the sole electricity market but in the specific added value market of cogeneration and process heat. In view of the volatility of the costs of fossil fuels, AREVA's choice brings to the large industrial heat applications the fuel cost predictability of nuclear fuel with the efficiency of a high temperature heat source tree of Greenhouse gases emissions. The ANTARES module produces 600 MWth which can be split into the required process heat, the remaining power drives an adapted prorated electric plant. Depending on the process heat temperature and power needs, up to 80% of the nuclear heat is converted into useful power. An important feature of the design is the standardization of the heat source, as independent as possible of the process heat application. This should expedite licensing. The essential conditions for success include: ${\bullet}$ Timely adapted licensing process and regulations, codes and standards for such application and design ${\bullet}$ An industry oriented R&D program to meet the technological challenges making the best use of the international collaboration. Gen IV could be the vector ${\bullet}$ Identification of an end user(or a consortium of) willing to fund a FOAK