• 한국운동역학회지
• /
• 제12권1호
• /
• pp.173-191
• /
• 2002

The purpose of this study was defined efficient throw motion pattern to obtain the quantitative data and to achieve successful bowling through kinetic - kinematic variables on the throw motion. Subject of group composed of three groups : Higher bowlers who are two representative bowlers with 200 average points and one pro-bowler. Middle bowlers who are three common persons with 170 average points. Lower bowler who are three common persons with 150 average points. Motion analysis on throw motion in three groups respectively has been made through three-dimension cinematography using DLT method. Two high-speed video camera at operating 180 frame per secondary. One-way ANOVA has been used to define variable relations. Analyzed result and conclusion are the following : The displacement of back of the hand must have wider difference of each right-left displacement to increase the spin of the ball. In high bowlers group, difference between the front-rear position of back of the hand in case of success and that in case of failure in follow throw is 0.17m. That is to say, momentum in case of success come to increase greatly, compared with that in case of failure. To increase the spin of the ball, the potential difference should be narrower in follow through. In case of the high bowlers, the velocity of the front-rear direction of the back of the hand has been the fastest both in release and follow through, compared with those in other groups, which has contributed to increasing the spin force of the ball. The orders in the resultant velocity of the back of the hand has shown the this : the finger tip$\rightarrow$the back of the hand$\rightarrow$wrist.These orders made the proximal segment support the distal segment. The distal segment has provided the condition to accelerate the velocity. In case of failure, the suddenly increased velocity has caused the failure in the follow through. Acutely flexing the angle of the back of the hand has contributed to lifting to increase the spin of the ball.

• 척추신경추나의학회지
• /
• 제13권1호
• /
• pp.23-33
• /
• 2018

Objectives: To determine the evidence supporting the effectiveness and safety of Daoyin exercise therapy for treating low back pain. Methods: We searched 11 electronic databases(Pubmed, Web of Science, EMBASE, Cochrane Library, CAJ, KISTI, KISS, NDSL, KMBASE, RISS, and DBpia) and two related journals,till April 2018 for randomized controlled trials(RCTs) related to testDaoyin exercise therapy for low back pain. Results: The inclusion criteria were fulfilled by eight RCTs. The meta-analysis of the eight studies showed positive results when Daoyin exercise therapy was used for treating low back pain. Conclusions: Based on the meta-analysis, we found indications for the favorable impact of Daoyin exercise therapy on the treatment of low back pain. However, our systematic review has limited evidence to support this theory because of the low quality of original articles. Hence, additional well-designed RCTs should be encouraged.

• 대한정형도수물리치료학회지
• /
• 제24권2호
• /
• pp.51-58
• /
• 2018

Backdround: Using RUSI (Rehabilitation Ultra Sound Imiging) method, which showed high reliability in soft tissue measurements, we compared the muscle relax and contraction, sex, and physical characteristics of the activity of the multifidus muscle in patients with chronic low back pain and normal subjects. Methods: In this study, 16 patients (male: 8, female: 8) with chronic low back pain and 16 healthy adult (male: 8, female: 8) were participated. Subjects lied prone posture on the table with elbow flexed $90^{\circ}$ and shoulder abducted $120^{\circ}$ (starting position). Test was applied two types that muscle relax position and muscle contraction position. Muscle relax position is equal to starting position and muscle contraction position is that upper extremity lift up about 5cm from the table. We measured the thickness of the multifidus muscle in each position by ultrasound. Results: There was a statistically significant difference between the two groups in deviation of Both Side Difference of Activated resting-Arm Lifting Ratio according to posture change between the chronic low back pain patient group and the normal group. Conclusion: The result of this study support previous study showing that there is an imbalance in the activity of multifidus in patients with chronic low back pain.

• 한국정보통신학회논문지
• /
• 제25권2호
• /
• pp.208-213
• /
• 2021

컴퓨터 활용을 통한 문화도 기존의 문화 형태를 변화시킬 만큼 다양하고 빠르게 변화되고 있다. 앉아서 생활하는 시간이 증가하면서 인간은 요통의 질병에 더 많이 노출 되었으며, 요통은 허리디스크를 중심으로 허리와 관련된 통증을 포함한다. 요통의 대부분은 척추와 몸통을 지지해주는 근육과 인대 이상에 따른 원인이 크다. 이에 허리 요통을 포함한 건강한 허리를 유지하기 위한 효과적인 대책이 필요하다. 본 논문에서는 요통을 감소하거나 치료에 도움을 줄 수 있도록 요추 운동효과를 얻을 수 있는 앱 개발을 위한 전반적인 설계를 제시한다. 이를 효과적으로 사용하기 위해서 요추 운동효과를 얻기 위한 방안을 제시하고, 이를 그래픽기반 유도점을 활용하여 효과적인 요통 치료에 도움일 될 수 있는 앱 설계 제시를 목표로 한다.

• 한국벤처창업학회:학술대회논문집
• /
• 한국벤처창업학회 2007년도 추계학술대회
• /
• pp.143-174
• /
• 2007

창업교육의 일환으로 인터넷 창업교육이 공공과 민간영역에서 다양하게 진행되고 있지만 수요자의 다양한 욕구를 충족시키고 창업성공에 이르게 하는 데는 부족함이 있다. 본 연구에서는 인터넷 창업교육의 현황을 고찰해보고 전자상거래지원센터에서 진행중인 인터넷 창업교육 실태조사를 통해 교육생 만족도 및 교육내용에 중요도와 실제 교육반영도 조사를 통해 창업교육 진행상의 문제점과 발전방안을 모색해 보고자 하였다. 연구결과 도출된 시사점은 첫째, 교육생들의 연령, 학력, 교육동기와 창업교육 경험유무에 따라 교육만족도가 다르게 나타나, 이들의 요구에 기반한 다양한 형태의 맞춤식 교육이 요구되었다. 둘째, 현재 진행되고 있는 기술적 요소에 대한 교육과 더불어 창업리더쉽, 사업수행능력 등 인적 요소, 사업추진환경과 사업아이템 등 사업환경적 요소에 대한 교육 보강이 요구되었다. 셋째, 창업후 사후지원과 컨설팅, 수료생 커뮤니티 구축, 수료생간 아이템 연계 지원, 상호네트워킹, 멘토링 등 교육후 관리의 중요성이 부각되었다. 본 논문은 이러한 조사분석을 통해 인터넷 창업의 성공적 지원을 위한 교육진행과 사후 연계체제 구축을 통해 창업교육의 고도화 및 내실화 방안을 모색하였다.

• 벤처창업연구
• /
• 제3권1호
• /
• pp.29-55
• /
• 2008

창업교육의 일환으로 인터넷 창업교육이 공공과 민간영역에서 다양하게 진행되고 있지만 수요자의 다양한 욕구를 충족시키고 창업성공에 이르게 하는 데는 부족함이 있다. 본 연구는 인터넷 창업교육의 현황을 고찰한 뒤, 전자상거래지원센터에서 진행 중인 인터넷 창업교육 실태조사를 통해 교육생 만족도 및 교육내용에 중요도와 실제 교육반영도 조사를 통해 창업교육의 문제점과 발전방안을 모색해 보고자 한다. 본 연구결과는 다음과 같다. 첫째, 교육생들의 연령, 학력, 교육동기와 창업교육 경험유무에 따라 교육만족도가 다르게 나타나, 이들의 요구에 기반한 다양한 형태의 맞춤식 교육이 요구된다. 둘째, 현재 진행되고 있는 기술적 요소에 대한 교육과 더불어 창업 리더십, 사업수행능력 등 인적 요소, 사업추진환경과 사업아이템 등 사업환경적 요소에 대한 교육 보강이 요구된다. 셋째, 창업 후 사후지원과 컨설팅, 수료생 커뮤니티 구축, 수료생간 아이템 연계 지원, 상호네트워킹, 멘토링 등 교육 후 관리의 중요성이 부각되었다. 본 논문은 이러한 조사분석을 통해 인터넷 창업의 성공적 지원을 위한 교육진행과 사후연계체제 구축을 통해 창업교육의 고도화 및 내실화 방안을 제시하고 있다.

• 대한물리치료과학회지
• /
• 제11권2호
• /
• pp.18-26
• /
• 2004

The purpose of this study was to compare difference of the static and dynamic balance in normal subject and LBP subject and recognizes about postural sway. The subjects of this study included 30 normal subjects and 30 LBP subjects. By using Active balance system, the static balance was measured by unit path length, circumference area, weight bearing, stabilometry length, while the dynamic balance was measured by step evaluation. Statistically analyzed using independent t-test to search static balance and dynamic balance difference in two groups. Postural sway appeared greatly in patient group than normal group in analysis result of static balance and postural sway was big in patient group of when closed eye and normal group and patient group did show statistical significance in unit path length, circumference area. Weight support of normal group was shared equally in weight bearing rate, but weight support of patient group stewed less to pain side. Anterior step time and Task achieve time of dynamic balance were spent more in patient group than normal group. Desire to be used to useful information to lay treatment policy about set-up and action of when quantification result of valued postural balance treats low back pain patient by objective tool, in the fixture, more researches in postural estimation desire that is enforced abuzz.

• Structural Engineering and Mechanics
• /
• 제18권3호
• /
• pp.303-314
• /
• 2004

An artificial neural network (ANN) application is presented for flexural and axial vibration analysis of elastic beams with various support conditions. The first three natural frequencies of beams are obtained using multi layer neural network based back-propagation error learning algorithm. The natural frequencies of beams are calculated for six different boundary conditions via direct solution of governing differential equations of beams and Rayleigh's approximate method. The training of the network has been made using these data only flexural vibration case. The trained neural network, however, had been tested for cantilever beam (C-F), and both end free (F-F) in case the axial vibration, and clamped-clamped (C-C), and Guided-Pinned (G-P) support condition in case the flexural vibrations which were not included in the training set. The results found by using artificial neural network are sufficiently close to the theoretical results. It has been demonstrated that the artificial neural network approach applied in this study is highly successful for the purposes of free vibration analysis of elastic beams.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.149-152
• /
• 2004

Speed and torque control of PMSM(Permanent Magnet Synchronous Motor) are usually achieved by using position and speed sensors which require additional mounting space, reduce the reliability in harsh environments and increase the cost of a motor. Therefore, many studies have been performed for the elimination of speed and position sensors. In this paper, a novel speed sensorless control of a permanent magnet synchronous motor based on SVMR(Support Vector Machine Regression) is presented. The SVM regression method is an algorithm that estimates an unknown mapping between a system's input and outputs, from the available data or training data. Two well-known different voltage model is necessary to estimate the speed of a PMSM. The validity and the usefulness of proposed algorithm are thoroughly verified through numerical simulation.

• 제어로봇시스템학회논문지
• /
• 제11권7호
• /
• pp.565-571
• /
• 2005

We present a novel speed estimation of a Permanent Magnet Synchronous Motor(PMSM) based on Support Vector Regression(SVR). The proposed method can estimate wide speed range, including 0.33Hz with full load, accurately in the steady and transient states where motor parameters variations are known without parameter estimator. Moreover, the method does not need offline training previously but is trained on-line. The training starts with the PMSM operation simultaneously and estimates the speed in real time. The experimental results shows the validity and the usefulness of the proposed algorithm for the 0.4Kw PMSM DSP(TMS320VC33) drive system.