• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.681-687
• /
• 2023

The selection technique for optimal operation position selection technique is used to present the initial bow and stern draft with minimum resistance, for achievingthat is, the optimal fuel consumption efficiency at a given operating displacement and speed. The main purpose of this studypaper is to develop a program to select the optimal operating position with maximum energy efficiency under given operating conditions based on the effective power data of the target ship. This program was written as a Python-based GUI (Graphic User Interface) usingbased on artificial intelligence techniques sucho that ship owners could easily use the GUIit. In the process, tThe introduction of the target ship, the collection of effective power data through computational fluid dynamics (CFD), the learning method of the effective power model using deep learning, and the program for presenting the optimal operation position using the deep neural network (DNN) model were specifically explained. Ships are loaded and unloaded for each operation, which changes the cargo load and changes the displacement. The shipowners wants to know the optimal operating position with minimum resistance, that is, maximum energy efficiency, according to the given speed of each displacement. The developed GUI can be installed on the ship's tablet PC and application and used to determineselect the optimal operating position.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.2
• /
• pp.75-81
• /
• 1989

In this paper, the authors describe on the field experiment of the newly designed actual stow net, standing on the result of the model experiment to examine the performance of the conventional net and the newly designed net, presented in two previous reports of this series. Concurrently the additional experiment to find out the possibility of changing of operating system from the side to the stern was carried out. 1. Fundamental shape of the experimented net was 20 times aslarge asthe newly designed model net. Performance of the net was detected by using two ultrasonic echo sounders: one was set downward at the top-most spreader of the shearing device to detect the opening height of the device from the sea bed, and the other sidewise at the starboard top-most spreader to detect the top-most opening width of the devices. Opening height of the newly designed net showed about 3m smaller than the conventional net at slow current of 0.6m/sec and less but it overcome 1m at speedy current of 0.8m/sec and more. Opening width of the newly designed net was 1.4 times as large as that of the conventional net, ant the front projection area of the newly designed net mouth was estimated as 1.3~1.6 times as large as that of the conventional net. 2. The experiment on the stern operating system was tightly limited by the structure of the ship employed in the experiment, which was a stern trawler of 2275 GT. The ship confronted by the wind with main anchor, while the net was put over the stern slipway and the hauling line of shearing device was operated through the top rollers of gallows. The experiment was very suggestive in the view point to mechanize the operating system, and so to decrease the man power except the following question. The of bow-stern line of ship, and that of net is much different.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.21 no.2
• /
• pp.131-136
• /
• 1985

The calculation of the resulting fluid motion is an important problem of ship hydrodynamics. For a partially immersed body the condition of constant pressure at the free surface can be linearized. The resulting linear boundary-value problem for the velocity potential is the Neumann-Kelvin problem. The two-dimensional Neumann-Kelvin problem is studied for the half-immersed circular cylinder by Ursell. Maruo introduced a slender body approach to simplify the Neumann-Kelvin problem in such a way that the integral equation which determines the singularity distribution over the hull surface can be solved by a marching procedure of step by step integration starting at bow. In the present pater for the two-dimensional Neumann-Kelvin problem, it has been suggested that any solution of the problem must have singularities in the corners between the body surface and free surface. There can be infinitely many solutions depending on the singularities in the coroners.

• Explosives and Blasting
• /
• v.30 no.2
• /
• pp.29-42
• /
• 2012

Variables influencing the free face movement due to rock blasting include the physical and mechanical properties, in particular the discontinuity characteristics, explosive type, charge weight, burden, blast-hole spacing, delay time between blast-holes or rows, stemming conditions. These variables also affects the blast vibration, air blast and size of fragmentation. For the design of surface blasting, the priority is given to the safety of nearby buildings. Therefore, blast vibration has to be controlled by analyzing the free face movement at the surface blasting sites and also blasting operation needs to be optimized to improve the fragmentation size. High-speed digital image analysis enables the analyses of the initial movement of free face of rock, stemming optimality, fragment trajectory, face movement direction and velocity as well as the optimal detonator initiation system. Even though The high-speed image analysis technique has been widely used in foreign countries, its applications can hardly be found in Korea. This thesis aims at carrying out a fundamental study for optimizing the blast design and evaluation using the high-speed digital image analysis. A series of experimentation were performed at two large surface blasting sites with the rock type of shale and granite, respectively. Emulsion and ANFO were the explosives used for the study. Based on the digital images analysis, displacement and velocity of the free face were scrutinized along with the analysis fragment size distribution. In addition, AUTODYN, 2-D FEM model, was applied to simulate detonation pressure, detonation velocity, response time for the initiation of the free face movement and face movement shape. The result show that regardless of the rock type, due to the displacement and the movement velocity have the maximum near the center of charged section the free face becomes curved like a bow. Compared with ANFO, the cases with Emulsion result in larger detonation pressure and velocity and faster reaction for the displacement initiation.

• Childhood Kidney Diseases
• /
• v.8 no.2
• /
• pp.195-204
• /
• 2004

Purpose: Hypophosphatemic rickets is a hereditary disease, characterized by hypophosphatemia due to renal phosphate wasting, impaired renal production of 1,25-dihydroxyvitamin $D_3$, rachitic bone deformities and impaired growth. The purpose of this study is to provide clinical profiles of patients with hypophosphatemic rickets in our hospital. Methods: Between July 1983 and February 2004, 56 patients were diagnosed as having hypophosphatemic rickets. The medical records of these patients were reviewed retrospectively. Clinical manifestations, family histories, laboratory data, treatment outcomes were described. Results: Fifty six patients were enrolled in this study. The average age at symptom onset and diagnosis were 20 months and 5 years respectively. Fourteen patients had family histories. The main clinical manifestations were bow legs and short stature. There was a significant negative correlation between the ages and the height z-scores at the time of diagnosis(r=-0.47, P=0.005). Initial laboratory data showed normocalcemia, hypophosphatemia, elevated serum alkaline phosphatase, decreased tubular reabsorption of phosphate and a normal range of 1,25-dihydroxyvitamin $D_3$ Radiographic examinations of bone revealed fraying, widening and cupping of the metaphyseal ends. Treatment consisted of Joulie solution and vitamin D metabolites, and resulted in improved biochemical and radiographic findings. However, height z-scores remained essentially unchanged(P=0.224). Complications of treatment were frequently observed, including hyperparathyroidism, nephrocalcinosis, and hypercalciuria. Sixteen patients had corrective osteotomy and 4 of them underwent leg lengthening together. Conclusion: There was a gap of several years between the onset of symptoms and the diagnosis. Early treatment seems to be essential to growth. For the earlier treatment, the offsprings of affected parents should be followed up closely.

• Journal of the Korean earth science society
• /
• v.39 no.3
• /
• pp.241-249
• /
• 2018

As the international trade increases, vessel traffics around the Korean Peninsula are also increasing. Maritime accidents hence take place more frequently in the southern coast of Korea where many big and small ports are located. Accidents involving ship collision and sinking result in a substantial human and material damage as well as the marine environmental pollution. Therefore, it is necessary to locate the ships quickly when such accidents occur. In this study, we suggest a new ship detection index by comparing and analyzing the reflectivity of each channel of the Korea MultiPurpose SATellite-2 (KOMPSAT-2) images of the area around the Gwangyang Bay. A threshold value of 0.1 is set based on a histogram analysis, and all vessels are detected when compared with RGB composite images. After selecting a relatively large ship as a representative sample, the distribution of spatial reflectivity around the ship is studied. Uniform shadows are detected on the northwest side of the vessel. This indicates that the sun is in the southeast, the azimuth of the actual satellite image is $144.80^{\circ}$, and the azimuth angle of the sun can be estimated using the shadow position. The reflectivity of the shadows is 0.005 lower than the surrounding sea and ship. The shadow height varies with the position of the bow and the stern, perhaps due to the relative heights of the ship deck and the structure. The results of this study can help search technology for missing vessels using optical satellite images in the event of a marine accident around the Korean Peninsula.

• Journal of the Korean Magnetics Society
• /
• v.23 no.4
• /
• pp.122-125
• /
• 2013

Perpendicular magnetic anisotropy (PMA) is the phenomenon of magnetic thin film which is preferentially magnetized in a direction perpendicular to the film's plane. Amorphous multilayer with PMA has been studied as the good candidate to realization of high density STT-MRAM (Spin Transfer Torque-Magnetic Random Access Memory). The current issue of high density STT-MRAM is a decrease in the switching current of the device and an application of amorphous materials which are most suitable devices. The amorphous ferromagnetic material has low saturated magnetization, low coercivity and high thermal stability. In this study, we presented amorphous ferromagnetic multilayer that consists of an amorphous alloy CoSiB and a nonmagnetic material Pd. We investigated the change of PMA of the $[CoSiB\;t_{CoSiB}/Pd\;1.3nm]_5$ multilayer ($t_{CoSiB}$ = 0.1, 0.2, 0.3, 0.4, 0.5, 0.6 nm, and $t_{Pd}$ = 1.0, 1.1, 1.2, 1.3, 1.4, 1.5, 1.6 nm) and $[CoSiB\;0.3nm/Pd\;1.3nm]_n$ multilayer (n = 3, 5, 7, 9, 11, 13). This multilayer is measured by VSM (Vibrating Sample Magnetometer) and analyzed magnetic properties like a coercivity ($H_c$) and a magnetization ($M_s$). The coercivity in the $[CoSiB\;t_{CoSiB}\;nm/Pd\;1.3nm]_5$ multi-layers increased with increasing $t_{CoSiB}$ to reach a maximum at $t_{CoSiB}$ = 0.3 nm and then decreased for $t_{CoSiB}$ > 0.3 nm. The lowest saturated magnetization of $0.26emu/cm^3$ was obtained in the $[CoSiB\;0.3nm/Pd\;1.3nm]_3$ multilayer whereas the highest coercivity of 0.26 kOe was obtained in the $[CoSiB\;0.3nm/Pd\;1.3nm]_5$ mutilayer. Additional Pd layers did not contribute to the perpendicular magnetic anisotropy. The single domain structure evolved in to a striped multi-domain structure as the bilayer repetition number n was increased above 7 after which (n > 7) the hysteresis loops had a bow-tie shapes.

• Journal of Korean Historical Folklife
• /
• no.45
• /
• pp.291-325
• /
• 2014

This study is about examining the changing process of worshiping heaven in the end of the Koryo dynasty and early Chosun dynasty. For this, it was compared with book of national rites. This paper will outline the differences of commemorative rites of worshiping heaven between Korea and China and its reason for changing process. Also, it shows the understanding of the historic characteristics of commemorative rites of worshiping heaven in the end of the Koryo dynasty and early Chosun dynasty through analyzing conducted religious service. Following methodological approach was used to achieve the aim of the study. The study includes historical changing process and basic ritual of commemorative rites of worshiping heaven from Koryo dynasaty to King Sejo period through various chronicles and books of rites. Understanding the trend transition of operating commemorative rites of worshiping heaven is expressed differently based on the situation in those days even though it is the same operation of commemorative rites of worshiping heaven. The existing study only primarily considered the rites of worshiping heaven in the end of the Koryo dynasty and early Chosun dynasty through the resources within the country. However, the process of settlement of commemorative rites of worshiping heaven is closely related to settlement of Confucian formality. As the problems cannot be solved if institutional changes are researched only though the resources within the nation, this following study also considered the transition of commemorative rites of worshiping heaven in China for sure. Through this approach, the study understood how China's rites of worshiping heaven settled down and formed in Korea and found differences of the rites of worshiping heaven between the two nations by comparing China's book with ornamental "seal" characters throughout many generations. Furthermore, it also illustrated historical characteristics of rites of worshiping heaven in the end of the Koryo dynasty and early Chosun dynasty by analyzing carried out religious service. Although it seems like there are many similarities of Chinese ritual procedure between Koryo dynasty and Chosun dynasty, there are existing significant differences in the context. Moreover, it is clear that there are differences of ritual between Tang, Song, Ming dynasty. These differences are directly connected to Korea and also with transition of king's power. Generally, Tang and Song dynasty show similar trend whilst Ming clarifies the differences between the two. For instance, there are differences between deep bow and superintendent of cho-hun, a-hun, and jong-hun. Transition of configuration is also one of the major differences. Changing of configuration has considerably important meaning refer to status of king's power. Analyzing specific features, such as size of altar, ancestral tablet, people who participate in sacrifices, okpye, configuration, and etc., made possible to consider the actual differences, not just examining different features of vaguely. Based on this foundation, the study closely examined the differences among the periods between the nations and gave the significance of the differences.