• Journal of Astronomy and Space Sciences
• /
• v.37 no.2
• /
• pp.143-156
• /
• 2020

Korea Polar Research Institute (KOPRI) installed an ionospheric sounding radar system called Vertical Incidence Pulsed Ionospheric Radar (VIPIR) at Jang Bogo Station (JBS) in 2015 in order to routinely monitor the state of the ionosphere in the auroral oval and polar cap regions. Since 2017, after two-year test operation, it has been continuously operated to produce various ionospheric parameters. In this article, we will introduce the characteristics of the JBS-VIPIR observations and possible applications of the data for the study on the polar ionosphere. The JBS-VIPIR utilizes a log periodic transmit antenna that transmits 0.5-25 MHz radio waves, and a receiving array of 8 dipole antennas. It is operated in the Dynasonde B-mode pulse scheme and utilizes the 3-D inversion program, called NeXtYZ, for the data acquisition and processing, instead of the conventional 1-D inversion procedure as used in the most of digisonde observations. The JBS-VIPIR outputs include the height profiles of the electron density, ionospheric tilts, and ion drifts with a 2-minute temporal resolution in the bottomside ionosphere. With these observations, possible research applications will be briefly described in combination with other observations for the aurora, the neutral atmosphere and the magnetosphere simultaneously conducted at JBS.

• Korean Journal of Ichthyology
• /
• v.13 no.2
• /
• pp.123-128
• /
• 2001

The reproductive ecology of Gobiobotia brevibarba was investigated at Hongchen River of Bangokri, Seomyon, Hongcheongun, Kangwondo, from March 1999 to February 2000. The favorite habitat was a stretch of river with fast flow and a stream bed mostly covered with cobbles and pebbles. The spawning ground was a riffle area 20~50 cm deep, with a current velocity of 0.6~1.3 m/sec, and a bottom consisting of cobble and boulder. The sex ratio of female to male was 1 : 0.86. Peak spawning season was May when water temperatures rose to $18{\sim}20^{\circ}C$. Male and females became sexually mature when they attained more than 40 mm and 50 mm in body length, respectively. The average number of eggs in the ovary was $2,040{\pm}400.57$ and the egg diameter was $1.98{\pm}0.06\;mm$. The matured eggs were demersal, spherical, and dimmed light yellow in color.

• The Korean Journal of Malacology
• /
• v.26 no.1
• /
• pp.19-31
• /
• 2010

Seogundo is a small island adjacent to the southern coast of Jeju Island and connected to it by a boulder beach at low tide Surveys of this area were conducted from 2001 to 2009 to enumerate the mollusks there and also to examine their diversity, relative abundance, and ecological relationships. Both the boulder beach itself and several large tide pools were studied, including the coarse sand substrate and several species of seaweed and coralline algae found in the tide pools. Of the 121 species obtained or observed, there were 97 gastropods, 16 bivalves, and 8 polyplacophorans. Live specimens were obtained for about half of those species. About one third were found on rocky substrate, with the most common species being Nodilittorina radiata and Nerita japonica in the upper intertidal zone, N. radiata and Littorina brevicula in the middle intertidal, and Turbo (Lunella) coronata coreensis and Acanthopleura japonica in the lower intertidal and shallow subtidal. The seaweeds and coralline algae contained about 40% of all mollusk species. The most common mollusks in two species of brown seaweed were Ittibittum parcum, Musculus nanus, and Euplica scripta. In a species of red seaweed, Komaitrochus pulcher was the most frequent, as in the coralline algae, along with M. nanus. The coarse sand in the tidepools contained about 25% of the species, with the Cerithiidae having the largest number. A sample of beach drift contained 17 species, with Bittium aleutaceum and Rissoina (Phosinella) pura being most common. Most species, about 60%, were found in a variety of habitats, especially the marine flora; few species exhibited any habitat preferences. Biographically, Jeju Island is part of the Warm Temperate Northwest Pacific Province and the East China Sea ecoregion with a strong faunal affinity with southern Japan, eastern China, and northeastern Taiwan. Zonal-geographical groupings reveal that the fauna is mainly subtropical-low boreal, preferring moderately warm water, with a somewhat smaller number of tropical-subtropical species.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.3 no.1
• /
• pp.33-45
• /
• 1966

The effect of thermal stress on a ship's hull is not considered to be serious by most naval architects. Frequently, however, cracking of hulls has been reported which occurred at sea while there were no external forces except the heat from the sun. Detailed investigations have been made of these reports and it has been reliably determined that the damage was initiated by solar heating. The author is not interested in all steel ship or in the applicability and validity of the formular itself, as it has already been proven by the experiments such as S.S. Boulder Victory. The author therefore proceeds directly to calculate the stress distribution on he hull and superstructure of the prototype model ship. These calculations are based on the experimental nonsymetrical temperature gradient data taken earlier on the Boulder Victory. The calculations were made principally to determine the extent of stresses which occurred on an all-steel ship in one case and secondly, those that occurred on a ship with a steel hull and an aluminum superstructure. From the calculations, the author expected the stress distribution of the two case would show distinctly different aspects, but the acquired results were very similar. Generally, at the point of junction of the steel hull and aluminum superstructure sharp peak stresses appeared. At the juncture of the superstructure and the main deck the ship with the aluminum superstructure registered almost 1000 psi more stress than did the ship with the all-steel construction. In the view of these findings, the author recommends to ship designers that pay particular attention to the point of junction of steel and aluminum plate. The author has proven that it is extremely important that a greater safety factor be used at the aluminum-steel junction point than at any other point. Although thermal effects cause high juncture-point stresses in all-steel ships, they are not nearly as critical as in ship constructed of two or more metals.

• Korean Journal of Ichthyology
• /
• v.20 no.2
• /
• pp.123-128
• /
• 2008

The foraging behavior of the beauty goby, Pterogobius zacalles, was studied at Mutu Bay, Aomori province, Japan. P. zacalles harvested invertebrates prey from benthic substrates by using two distinct foraging modes: picking substrate among boulders and sucking surface of boulder. Among others, picking substrate among boulders was primarily used foraging mode. The foraging modes of P. zacalles were followed by three stages: searching for prey, feeding and chewing. For foraging, it takes less time to suck out the surface of boulder than pick up substrate among boulders, because the resting site of P. zacalles is close to the place where they do sucking. The diets of P. zacalles primarily consisted of benthic amphipods regardless of their foraging modes. Only the difference was that they can get bigger amphipods when they did picking rather than sucking. Even though it needs more time and energy to do picking, P. zacalles was compensated by getting a high-calorie diet eventually, therefore prey size can be the determinant of their foraging modes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2B
• /
• pp.139-147
• /
• 2012

This study is derived relationships of the resistance coefficients of Darcy-Weisbach and Manning for flow resistance and the dimensionless velocity using many field measurements for 1,875 rivers consist of sand 179, gravel 992, cobble 651 and boulder 53 channels in natural rivers, respectively. The relationships of power law forms are developed as a function of flow discharge, friction slope, and relative submergence by the regression and the semi-empirical method. The measurements distribution of Manning resistance coefficients by the Box-Whisker Plots show the values which ranges from 0.004~0.151 for sand, 0.008~0.250 for gravel, 0.015~0.327 for cobble, 0.023~0.444 for boulder in natural rivers, respectively. Relationships of these semi-empirical and resistance coefficients will be useful to give information in hydraulic engineering.

• Tunnel and Underground Space
• /
• v.28 no.1
• /
• pp.1-24
• /
• 2018

The use of TBM (tunnel boring machine) gradually increases in worldwide tunneling projects. TBM machine are often applied to more difficult and complex geological conditions in urban area, and many problems and difficulties have been reported due to these geological conditions. However, in Korea, there is a lack of research on difficult grounds so far. This paper discussed general aspects of investigation method, and problems of TBM tunneling in difficult grounds. Construction cases that passed through the difficult grounds in worldwide were analyzed and the typical difficult grounds were classified into 11 cases. For each case, the definition and general problems were summarized. Particularly, for mixed ground and boulder ground, and fault zone, which are frequent geological conditions in urban area with shallow depth, classification system, investigation methods and major considerations were discussed, and proposed the direction of future research. This paper is a basic study for the development of TBM construction technology in difficult ground, and it is expected that it will be useful for related research and construction of TBM in difficult ground in the future.

• Structural Engineering and Mechanics
• /
• v.48 no.1
• /
• pp.17-39
• /
• 2013

In the present paper, a coaxial rotating smeared crack model is proposed for mass concrete in three-dimensional space. The model is capable of applying both the constant and variable shear transfer coefficients in the cracking process. The model considers an advanced yield function for concrete failure under both static and dynamic loadings and calculates cracking or crushing of concrete taking into account the fracture energy effects. The model was utilized on Koyna Dam using finite element technique. Dam-water and dam-foundation interactions were considered in dynamic analysis. The behavior of dam was studied for different shear transfer coefficients considering/neglecting fracture energy effects. The results were extracted at crest displacement and crack profile within the dam body. The results show the importance of both shear transfer coefficient and the fracture energy in seismic analysis of concrete dams under high hydrostatic pressure.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.51.2-51.2
• /
• 2010

Efficient and durable electrical energy storage is one of the major factors limiting the wide-spread adoption of renewable energy. Since lithium-ion batteries (LIBs) were first commercialized in the early 1990s, LIBs have emerged as an important energy storage device for portable electronics. LIBs are very desirable because of their high energy storage per volume and per mass. However, LIBs with high energy and power as well as higher stability are needed for their use in a variety of energy storage applications such as MEMS devices, PDA, plug-in hybrids, all-electric vehicles and large scale utility systems. In this talk, I will discuss present energy perspective, especially energy storage and its role in renewable energy. After that I will discuss the recent advances in nanostructured materials and interface engineering that have led to the achievement of improved Li-ion batteries. Finally I will talk aboutcritical issues that need to be addressed to obtain further improvements in Li-ion batteries.

• Journal of The Korean Astronomical Society
• /
• v.37 no.5
• /
• pp.593-596
• /
• 2004

We introduce a method of identifying evidence of shocks in the X-ray emitting gas in clusters of galaxies. Using information from synthetic observations of simulated clusters, we do a blind search of the synthetic image plane. The locations of likely shocks found using this method closely match those of shocks identified in the simulation hydrodynamic data. Though this method assumes nothing about the geometry of the shocks, the general distribution of shocks as a function of Mach number in the cluster hydrodynamic data can be extracted via this method. Characterization of the cluster shock distribution is critical to understanding production of cosmic rays in clusters and the use of shocks as dynamical tracers.