• Smart Media Journal
• /
• v.1 no.4
• /
• pp.52-58
• /
• 2012

In recent years the combination of IT and BT for U-Healthcare Medical Services has attracted popular attention as an alternative for solving health problems due to aging issue. Active oxygen as free radicals causes unstable state of the body resulting to other disease on which approximate 90% of the diseases are associated with active oxygen. The severity is even higher along with increasing age. Therefore, there is a need for systematic management of active oxygen saturation for the elderly and chronic patients. In this paper, the data about active oxygen measurements from the body measurement is sent to the data storage of medical facilities by the service provider. Medical information is measured by devices provided complying with the standard, support and information using Bluetooth communication. Users can check their health status themselves using the proposed system through 3G/4G mobile devices like smart phone to medical institutions in which the smart phone act as a gateway for medical data transferred from patient to medical institutions and vice versa. Users can get and experience a diagnosis and effective U-Environmental Health Services from Medical institutions anywhere using the proposed built system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.63-68
• /
• 2017

In this paper, Distance recognition measurement using distance calculation correction algorithm, was realization through LED dimming control. The calculation values for the RSSI average filtering and the RSSI feedback filtering were calculated and applied to reduce the error of the RSSI value measured from a long distance. It was confirmed that the RSSI values through the average filtering and the RSSI values measured by setting the coefficient value of the feedback filtering to 0.5 were ranged from -61 dBm to - 52.5 dBm, which shows irregular and high values decrease slightly as much as about -2 dBm to -6 dBm as compared to general measurements. A distance calculation correction algorithm to improve the accuracy was applied, which confirmed that as the distance increases, the range of errors decreases. In conclusion, unstable signals were corrected using the RSSI measurement result filtering, and the distance calculation correction algorithm was applied and performed to reduce the range of errors. In addition, RGB colors were implemented by LED to indicate the distance determination and the signal stability.

• Journal of the Korea Convergence Society
• /
• v.8 no.3
• /
• pp.31-40
• /
• 2017

The rise of eco-friendly personal electric mobility is a worldwide trend and the first Korean-made IT convergence electric skateboard, Youth Board, is developed to lead the trend. Youth Board is remotely controllable using either Youth Wearable Controller or Youth App through Bluetooth v4.0 communication, can speed up to 25 km/hr, and operating time is approximately 1.5 hr. A LED display located in the front side of Youth Board deck shows three different states to a rider for user convenience: remaining battery SOC, current driving speed, and braking amount. Indoor EMC test results between Youth Board and Youth Wearable Controller and outdoor Youth Board driving test results are analyzed. In particular, driving test results show the maximum current output is about 15% lowered compared to the other competitor electric skateboard and it lessens the power burden of the motor ESC. These results show Youth Board's usefulness as a personal mobility in the sense of small, light, and inexpensive aspects.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.231-236
• /
• 2020

In today's society, the majority of people use smartphones, and mobile ordering and payment systems for their convenience are gaining their attention. The mobile payment market is on the rise, with over 71% of the market that is already formed in China. Many mobile payment markets are growing in Korea, which is a system that is provided only in large franchises. In this paper, we propose a mobile ordering and payment system using short-range wireless communication technology that can be easily used not only in franchises but also in the small businesses, and for the convenience of users in modern society to make a system that enables ordering and payment through mobile to communicate between the devices developed by short range wireless communication technology, smartphone and the main server.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1941-1948
• /
• 2016

The incident during commuting to school happened frequently in these days, such that the government announced the student commuting safety policy for addressing to implement the safety management system of the unsafer school commuting zone. In this paper, a commuting tracking system is proposed that notifies the location of vehicles and the boarding status of student using BLE beacon and smart phone GPS function. The commuting tracking system that gets the data from the system server of driver's smart phone GPS location and UUID of the beacon which had provided students has configured to provide notifications to parents and related administrators. It provides real-time information about whether a student boarding, boarding times and bus locations for parents and administrators. It verifies the disembarking time for each student and also provides to driver to secure if any student tries to board the wrong school bus and if any students is left behind in the bus.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.522-525
• /
• 2015

In this paper, we propose a walking aid system that guides route to visually impaired people in order to recognize uncertain obstacles based on tactile stimulation. The proposed system is composed of the touch-based obstacle detection module, the obstacle height detection module, and the route guidance algorithms. The touch-based obstacle detection module detects each obstacle, which is located at left, right, and front of a visually impaired person by stimulating his thumb with the rotational force of the servomotor. The obstacle height detection module integrates detected data by the linear arrangement of ultrasonic sensors to identify the height of an obstacle about 3 of-phase(i.e., high, medium, low). The proposed route guidance algorithm guides an optimized path to the visually impaired person by updating his current position information based on the signal of the built-in GPS receiver in smartphone. In addition, the route guidance algorithm delivers information with speech to a visually impaired person through Bluetooth commuination in the developed route guidance app. The proposed system can create a path to avoid the obstacles by recognizing the placed situation of the obstacles with exploring the uncertain path.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.531-532
• /
• 2016

Carpal tunnel syndrome, carpal tunnel becomes part of a narrower median nerve pain occurs pressed. How a stable wrist stretch for the prevention of carpal tunnel syndrome is required, it should life guides to fit the user is provided. In this research, users themselves recognize the risk of carpal tunnel syndrome, to be able to stretch, it implements the application. Application, based on the usage time set by the user, executes the alarm and lock. At this time, the user may utilize arduino and inertia sensor, it is possible to wrist stretch, to analyze usage patterns, it is possible to provide a medical information and life guides to suit the user. Data using Bluetooth 4.0 communication has been to meet the runaway. In order to evaluate the mounted system, targeting four subjects, the time and the touch frequency of usage of the 3-day smartphone measured, as a result of the questionnaire, it reduces the frequency of use of smartphones, a positive it was possible to prove the effect.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.453-456
• /
• 2016

Recently, IoT technologies attract much attenction in medical area. Previous medical IoT had focused mainly on chronological diseases or fitness for particular users. Contrarily, medical use of the IoT technologies is now extended for medical institutes and hospitals to care intensively in-house patients, which requires typically more strict and reliable data delivery and security, authentication and authorization. This study defines scenario of the medical IoT for the intensive care and proposes an architecture of the medical IoT services. We implement a testbed using commerical sensors and Arduino board together with a Web-based platform. Experiment results on the testbed show that our approach can be feasible for the medical system in terms of latency and accuracy in medical data delivery.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.326-327
• /
• 2016

A study on Ontology-based indoor positioning techniques using BLE Beacon. Recently BLE beacon has been widely used as a technique for measuring the indoor location. But it requires a filtering technique for the measurement of the correct position, and uses the most fixed beacon. It is not accurate that calculates the position information through the identification of the beacon signal. Therefore, filtering is important. So it takes a lot of time, position measurement and filtering. Thus, we is to measure the exact position at the indoor using a mobile beacon. The measured beacon signal is composed of an ontology for reuse in the same pattern. RSSI is measured the receiver is the distance of the beacon. And this value configure the location ontology to be normalized by the relationship analysis between the values. The ontology is a method for calculating the position information of the moving beacon. It may be detected fast and accurate indoor position information.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.171-173
• /
• 2018

The poor working conditions of transit drivers not only lead to mental stress and fatigue accumulation of workers, but also to the main causes of mass transit accidents. Stress and fatigue accumulation are closely related to the vital signs because they affect the psychological and physical health. In this paper, we designed a digital garment which can measure driver's health condition by measuring electrocardiogram, pulse rate and body temperature. Also proposed a system that transmits the measured bio-signal to the smartphone app via Bluetooth and transmits the current position of the driver to the server by using the built-in GPS of the smartphone, assuming there is something wrong.