• Korea Science and Art Forum
• /
• v.37 no.2
• /
• pp.101-112
• /
• 2019

Regardless of the size, the role and meaning of the space required for human daily life are the same. Especially, as the spatial design is small and the size is small, the careful design and problem solving are needed to enable comfortable and convenient life even in a narrow space. The purpose of this study is to design a convergence model that utilizes the advantages of BIM, which can simulate actual design based on a new one-person housing space design plan optimized for one person. This study applied the BIM design technology to one-person housing 2D design, and the suitability examination and the space optimization design of the interior design were carried out. As a result of the study, utility of space improvement, consideration of housing environment, interference check, application of eco-friendly housing system, and MEP design item were derived. Therefore, BIM space design in interior space has been confirmed as a way to overcome limit and inefficiency of 2D design which is applied to actual space by various space design elements. Based on the results of this study, the One-person housing space model, which is applied to the study, is a pure creation designed based on various one-person housing of social and cultural peculiarities derived from previous research. This design example was applied to BIM technology to confirm the detailed and practical design possibility.

• Journal of KIBIM
• /
• v.4 no.2
• /
• pp.1-9
• /
• 2014

As interest in green building has increased, construction market has evolved through BIM-based architecture also, BIM-based technologies have been developed simultaneously. Due to this aspect, the need of environmental analysis software utilizing BIM data became essential. This study shows that BIM-based integrated module provides objective analysis to proceed quick decision-making for a proposal. In addition to that, this integrated module creates a model through BIM data to analyze and report residential environment and energy consumption such as, daylight, view, ventilation and privacy in order to practically apply the BIM technology from the schematic design.

• Journal of KIBIM
• /
• v.12 no.1
• /
• pp.42-54
• /
• 2022

BIM facilitates data transparency and consistency through three-dimensional parametric modeling and promotes the accurate managing and sharing of project information. In Korea, however, BIM-based detailed design of architectural interior finishes required during the Construction Documents phase increases the burden on architectural firms due to frequent design changes and manual workload. Therefore, the purpose of this study was to establish rule-based modules using parametric modeling that automates repetitive tasks that occur during the detailed design of interior finishing. Interviews with practitioners were conducted to analyze the major finishing elements. Of these floors, walls, and ceilings, which were the most rudimentary and common items, were selected as the subjects of the study. The modules developed in this study have two functions. One is to create new finish types, and the other is the automatic modeling of new types into rooms. For these functions, parameters that belonged to each finish and room element in a BIM model were analyzed and valid parameters directly used for parametric modeling were derived. Then, based on these parameters, rule-based modules for three elements, I.e., floors, walls, and ceilings were constructed with Revit Dynamo, and the effectiveness of the modules was verified with a pilot test. In conclusion, this study suggested a series of processes for automatic finishing to improve the efficiency of BIM-based architectural detailed design of finishes and to contribute in solving the chronic problems occuring during current design processes.

• Journal of KIBIM
• /
• v.9 no.4
• /
• pp.1-9
• /
• 2019

Visualized information platforms through building information modeling (BIM) such as virtual reality (VR) and augmented reality (AR) improves the efficiency of architectural information exchange. Despite that, less effort has been directed to evaluate the effectiveness of different BIM visualization platforms for architectural design review. This study fills these gaps and compares three BIM visualization tools for reviewing diverse architectural review factors and technology acceptance degree. Three main BIM visualization tools, which are desktop-based, virtual reality-based and augmented reality-based, were employed and different architectural review factors and user's technology acceptance degree was measured. As a result, VR and AR environment showed better visual presentation than desktop environment during design review. In terms of the technology acceptance level, VR and AR environments have received higher ratings compared to desktop environments. The detailed findings provide guidelines for participants and researchers involved in design review process to selectively adopt VR and AR system to various architectural design review components.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.281-295
• /
• 2016

Lately, the management of domestic BIM performance is quite lacking, as the evaluation and management data from successful cases of BIM implementation both on projects and in companies, and related effects (time, cost and other physical gains) are not well kept for future use in BIM development. In order to overcome the above obstacles, a systematic approach to evaluating BIM adoption with focus on particular elements like BIM implementation environment and processes, and the physical factors yielded by BIM, is necessary. In this study, objective and detailed assessment indicators and weights that are appropriate for the domestic situation were derived through research for purposes of developing a web-based BIM maturity measurement program that is tailor-made for the Korean construction atmosphere. Through a company's self-maturity measurement, excellent quality of BIM deliverables and output can be achieved and managed. Furthermore, the domestic BIM capacity can gradually increase since design firms' BIM capability can be judged during procurement basing on measurement indicators.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.267-280
• /
• 2016

In the construction industry, adoption of BIM is a global tendency whereas it doesn't seem to be fully activated in domestic market. Thus, the need of BIM ROI measurement is emerging. There has been a few researches which is only focused on evaluating achievement of BIM in constructional stage. However, it's hard to find any studies on the case of measurement of BIM ROI at the design phase. Therefore, this paper analyzes the domestic and external 12 advanced researches in the measurement of BIM ROI and suggests common investment and return facts. Based on this, this paper proposes a measuring method which is applicable in domestic architectural firms. To determine the appropriateness of the measure, there has been an expert survey and interview. According to the expert survey, the measure itself is practical. But in other survey targeting industry employee, actual profit and efficiency appear to be significantly different from previous expectations. In short, in the domestic conditions in the design stage, the introduction of BIM doesn't have a practical effect and this is one of the main reason why BIM can't be fully functional.

• Journal of KIBIM
• /
• v.12 no.4
• /
• pp.93-103
• /
• 2022

As the design environment of domestic infrastructure facilities shifts from a traditional co-work office system to a virtual digital co-work office, a CDE collaboration platform is required to build a digital co-work office suitable for the domestic design environment. In addition, a number of large multinational projects requiring collaboration from domestic and foreign construction companies are ordered, and procedures for performing tasks based on international standards such as ISO 19650 are required, so preparation for domestic designers is required. Therefore, this study aims to derive CDE requirements for the development of an ISO 19650-based CDE collaboration platform suitable for domestic design environments, and derived Korean CDE requirements based on ISO 19650 series and overseas CDE cases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6922-6931
• /
• 2014

The development of modern science and technology and computer engineering breakthroughs in the field of information and communication have brought about many changes in lifestyle. The government announced the goal of educational policy in 2030 to educate people in future society on a future-oriented perspective. Changes in the curriculum along with changes in educational facilities are essential. Therefore, the operation of a classroom should be associated with classroom spatial information. The BIM design based on 3D geometry information was designed. The BIM design can link the design information and non-geometric information of spatial information. This study examined the operation of school facilities based on classroom spatial information with BIM. This study suggests standardization of classroom spatial information based on BIM. The scenarios of BIM ordering and design for departmentalized classrooms management is proposed.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.1
• /
• pp.109-118
• /
• 2012

The Purpose of this study is to develop a design process of free-formed super tall buildings with parametric design approach using BIM. Before BIM tools like Revit was developed, it is considered as very time consuming process and requires extensive efforts and costs for making free-formed super tall building modeling. Current trends of free-formed super tall building are for proofing city's economic strength and symbol. New digital tools have been developed and used for pursuing many design methods for building design. In this study, BIM based Parametric design approach is studied to seek for possibility of generating free-formed super tall building fast, easily, and accurately.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.2
• /
• pp.127-137
• /
• 2019

In this study, we have developed a calculation system for BIM-based quantities, 4D process, and 5D construction costs, by integrating object shape attributes and the standard classification system which consist of Cost Breakdown System(CBS), Object Breakdown System(OBS) and Work Breakdown System(WBS) in order to use for the 4 dimensional process control of roads and rivers. First, a new BIM library database connected with the BIM library shape objects was built according to the CBS/OBS/WBS standard classification system of the civil engineering field, and a integrated database system of BIM-based quantities, process(4D), and construction costs(5D) for roads and rivers was constructed. Nextly, the process classification system and the cost classification system were automatically disassembled to the BIM objects consisting of the Revit-family style elements. Finally, we added functions for automatically generating four dimensional activities and generating a automatic cost statement according to the combination of WBS and CBS classification system The ultimate goal of this study was to extend the integrated quantities, process(4D), and construction costs(5D) system for new roads and rivers, enabling the integrated use of process(4D) and construction costs(5D) in the design and construction stage, based on the tasks described above.