• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1362-1369
• /
• 2018

A method aimed at improving the beam-wave interaction efficiency by changing the coupling slot configuration has been proposed in the study of extended interaction oscillators (EIOs). The dispersion characteristics, coupling coefficient and interaction impedance of the high-frequency structure based on different types of coupling slots have been investigated. Four types of coupled cavity structures with different layouts of the coupling slots have been compared to improve the beam-wave interaction efficiency, so as to analyze the beam-wave interaction and practical applications. In order to determine the improvement of the coupling slot to a coupled cavity circuit in an EIO, we designed four nine-gap EIOs based on the coupled cavity structure with different coupling slot configurations. With different operating frequencies and voltages takes into consideration, beam voltages from 27 to 33 kV have been simulated to achieve the best beam-wave interaction efficiency so that the EIOs are able to work in the $2{\pi}$ mode. The influence of the Rb and the ds on the output power is also taken into consideration. The Rb is the radius of the electron beam, and the ds is the width of the coupling slot. The simulation results indicate that a single-slot-type EIO has the best beam-wave interaction efficiency. Its maximum output power is 2.8 kW and the efficiency is 18% when the operating voltage is 31 kV and electric current is 0.5 A. The output powers of these four EIOs that were designed for comparison are not less than 1.7 kW. The improved coupling-slot configurations enables the extended interaction oscillator to meet the different engineering requirements better.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.299-304
• /
• 2021

This study focuses on the preparation of acetaminophen (AP) imprinted functional biomaterials for a transdermal drug delivery using mung bean starch (MBS), polyvinyl alcohol (PVA), sodium benzoate (S) as a crosslinking agent, glycerol (GL) as a plasticizer, and melanin (MEL) as a photothermal agent. The prepared AP imprinted biomaterials were characterized using FE-SEM and their physical properties were evaluated. The photothermal effect and AP release property for functional biomaterials were examined with the irradiation of near infrared (NIR) laser (1.5 W/cm²). When the NIR laser was irradiated on functional biomaterials with/without the addition of MEL, the temperature of MEL added biomaterial increased from 25 ℃ to 41 ℃, whereas the biomaterial without MEL increased from 25 ℃ to 28 ℃. Results indicate that there is the photothermal effect of prepared biomaterial with the addition of MEL. Based on the results, AP release properties were evaluated using standard buffer solutions and artificial skin. It was found that AP release rates of MEL added AP loaded biomaterials were 1.2 times faster than those of MEL non-added AP loaded biomaterials when irradiating with NIR laser. We envision that the developed functional biomaterials can be utilized for an acute pain-killing treatment.

• Journal of agriculture & life science
• /
• v.53 no.5
• /
• pp.153-165
• /
• 2019

This paper analyzes the priorities of introducing agricultural environmental conservation practices for the successful introduction of agricultural environmental conservation programs and promotes customized agricultural environment conservation practices packages suitable for the local environment. Agricultural environmental conservation practice consists of three fields: soil, water, and air, nine sub-fields, and 30 practice skills. Using the advantages of AHP and BWS appropriately for priority analysis, three areas and nine sub-fields are measured using AHP techniques, and the practical activities of each fields are measured by priorities using BWS techniques to enhance the differentiation and completeness of research. In addition, the criteria for evaluating priorities of practical activities used 'Environmental effectiveness' and 'Technical feasibility'. As a result of the priority evaluation, the 'Soil testing and reduction of fertilizer and livestock manure application' activities were evaluated as having the highest priority. Based on the results of the priorities for these practical activities, examples of customized practical activity packages by farming type and environmental conditions were presented.

• Journal of Ginseng Culture
• /
• v.3
• /
• pp.119-131
• /
• 2021

The purpose of this study was to explore the characteristics of and solution to thermogenic reactions to Korean ginseng through bibliographic research. A review of bibliography on the thermogenic reaction induced by ginseng indicated that people who lack fluids, have fever in lungs, a stuffy chest, coughing up sputum, a strong pulse, and constipation due to fever in the stomach may exhibit such a reaction. In the herbal medicine book of the Qing Dynasty, Bon-Cho-Jeong-Ui (本草正義) recorded that wild simulated ginseng is slightly cold and replenishes the body's liquid reserves. The book also describes the field cultivated ginseng is slightly warm and enhancing stamina. Bon-Kyung-Bong-Won (本經逢源), Bon-Cho-Pyon-Dok (本草便讀), and Bon-Cho-Jeong-Ui were published authors in the Qing Dynasty, and they explained that ginseng fine root is bitter, supplements bodily fluids, and can be easily ingested because it is cold. Wol-Ji-In-Sam-Jeon (月池人蔘傳) and Bon-Cho-Bi-Yo (本草備要) described fresh ginseng assweet, bitter, and slightly cold in the Ming and Qing Dynasties, respectively. On the basis of this bibliographic description, the thermogenic reaction induced by Korean ginseng can be overcome by using ginseng fine root, fresh ginseng, or wild simulated ginseng. These ginseng radices are slightly cool, replenish human bodily fluids, and show the physiological effects of easy ingestion properties.

• The Plant Pathology Journal
• /
• v.37 no.1
• /
• pp.47-56
• /
• 2021

Plants protect against viruses through passive and active resistance mechanisms, and in most cases characterized thus far, natural recessive resistance to potyviruses has been mapped to mutations in the eukaryotic initiation factor eIF4E or eIF(iso)4E genes. Five eIF4E copies and three eIF(iso)4E copies were detected in Brassica rapa. The eIF4E and eIF(iso)4E genes could interact with turnip mosaic virus (TuMV) viral protein linked to the genome (VPg) to initiate virus translation. From the yeast two-hybrid system (Y2H) and bimolecular fluorescence complementation (BiFC) assays, the TuMV-CHN2/CHN3 VPgs could not interact with BraA.eIF4E.a/c or BraA.eIF(iso)4E.c, but they could interact with BraA.eIF(iso)4E.a in B. rapa. Further analysis indicated that the amino acid substitution L186F (nt T556C) in TuMV-UK1 VPg was important for the interaction networks between the TuMV VPg and eIF(iso)4E proteins. An interaction model of the BraA. eIF(iso)4E protein with TuMV VPg was constructed to infer the effect of the significant amino acids on the interaction of TuMV VPgs-eIF(iso)4Es, particularly whether the L186F in TuMV-UK1 VPg could change the structure of the TuMV-UK1 VPg protein, which may terminate the interaction of the BraA.eIF(iso)4E and TuMV VPg protein. This study provides new insights into the interactions between plant viruses and translation initiation factors to reveal the working of key amino acids.

• Quality Improvement in Health Care
• /
• v.27 no.2
• /
• pp.57-72
• /
• 2021

Purpose: At present, there are a variety of serious patient safety incidents related to problems in health information technology (HIT), specifically involving electronic medical records (EMRs). This emphasizes the need for an enhanced electronic medical record system (EMRS). As such, this study analyzed both the nature of and potential to prevent incidents associated with HIT/EMRS based on data from the Korea Patient Safety Reporting and Learning System (KOPS). Methods: This study analyzed patient safety incidents submitted to KOPS between August 2016 and December 2019. HIT keywords were used to extract HIT/EMRS incidents. Each case was reviewed to confirm whether the contributing factors were related to HIT/EMRS (HIT/EMRS-related incidents) and if the incident could have been prevented (HIT/EMRS-preventable incidents). The selected reports were summarized for general clarity (e.g., incident type, and degree of harm). Results: Of the 25,515 obtained reports, 2,664 incidents (10.4%) were HIT-related, while 2,525 (9.9%) were EMRS-related. HIT/EMRS-related incidents were the third largest type of incident followed by 'fall' and 'medication incidents.' More than 80% of HIT/EMRS-related incidents were medication-related, accounting for approximately one-third of the total number of medication incidents. Approximately 10% of HIT/EMRS-related incidents resulted in patient harm, with more than 94% of these deemed as preventable; further, sentinel events were wholly preventable. Conclusion: This study provides basic data for improving EMR use/safety standards based on real-world patient safety incidents. Such improvements entail the establishment of long-term plans, research, and incident analysis, thus ensuring a safe healthcare environment for patients and healthcare providers.

• Journal of Korean Foot and Ankle Society
• /
• v.26 no.2
• /
• pp.95-102
• /
• 2022

Purpose: This study was based on the Korean Foot and Ankle Society (KFAS) member survey and aimed to report the current trends in the management of syndesmotic injuries over the last few decades. Materials and Methods: A web-based questionnaire containing 36 questions was sent to all KFAS members in September 2021. The questions were mainly related to the preferred techniques and clinical experiences in the treatment of patients with syndesmotic injuries. Answers with a prevalence ≥50% of respondents were considered a tendency. Results: Seventy-six (13.8%) of the 550 members responded to the survey. The results showed that the most preferred method to diagnose a syndesmotic injury was magnetic resonance imaging (MRI). Intraoperatively, the external rotation stress test and the Cotton test were most frequently used to confirm syndesmotic diastasis. The reduction was usually done by a reduction clamp. One 3.5-mm screw was used most frequently over three cortices at 2~4 cm above the ankle joint. The preferred ankle position during fixation was 0° dorsiflexion. Removal of the syndesmotic screw was routinely done by most surgeons, mainly because of the limitation of movement and risk of screw breakage. Factors that affect suture button selection included non-rigid fixation which enables adequate fixation, early weight-bearing, and an infrequent need to remove the hardware. Inadequate reduction was considered the main factor that affects poor prognosis. Conclusion: This study proposes updated information about the current trends in the management of syndesmotic injuries in Korea. Consensuses in both the diagnostic and therapeutic approach to patients with syndesmotic injury were identified in this survey study. This study may raise the awareness of the various possible approaches toward the injury and should be used to further establish a standard protocol for the management of syndesmotic injuries.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.461-469
• /
• 2021

Houses contain our own characteristics and philosophy. As a Yangban house in the late Joseon Dynasty, the house of Kwon Hee-moon was constructed over 250 years to the present. Therefore, this house can more objectively examine the aesthetic ideals, such as the thoughts and philosophies of the house owners across the generations. The name of Sarang-Chae is Ui-Wang-Seo(嶷汪棲), it shows thoughts and philosophies symbolically. Ui(嶷)·Wang(汪) mean the elements of nature, and Seo(棲) symbolizes living together, It is aesthetics of Nature, aesthetics of Human boundary. Aesthetics of Nature boundary is aesthetics of Ui(嶷)·Wang (汪), so it is clear and fine. Aesthetics of Human boundary is aesthetics of Seo(棲), so it has meditation and purity. As such, the aesthetic ideal of Kwon Hee-moon's house pursues the ideal of life. Through the aesthetic boundary of the house of Kwon Hee-moon, we can understand the aesthetic boundary of Honam Yang-ban House in the Late Chosun Dynasty.

• Animal Bioscience
• /
• v.35 no.7
• /
• pp.999-1009
• /
• 2022

Objective: To improve the feeding value of rice straw (RS), this study evaluated the potential of rice straw fermented with Pleurotus sajor-caju (FRS) as dairy goat feed. Methods: Spent Pleurotus sajor-caju mushroom substrate was used as fungi inoculum to break the lignocellulose linkage of rice straw, which was solid-fermented at 25℃ to 30℃ for 8 weeks. The ruminal degradation of pangolagrass hay (PG), FRS, and RS were measured in situ for 96 hours in three dry Holstein cows, respectively. Effect of fungi fermented RS on milking performance was studied in feeding trials. A total of 21 Alpine goats a trial were divided into 3 groups: a control group in which PG accounted for 15% of the diet dry matter, and FRS or RS was used to replace the PG in the control group. Goats were fed twice a day under two 28-day trial in individual pens. Meanwhile, a 3×3 Latin square trial (14 days/period) was conducted to study the rumen digestion of three diets by using three fistulated dry goats. Rumen contents were collected for metabolite analyses every one to three hours on the last two days. Results: In situ study showed that fermentation could elevate the rumen degradable fraction and effective degradability of RS (p<0.05). Effective degradability of FRS dry matter was significantly increased from 29.5% of RS to 41.7%. Lactating trial results showed that dry matter intake and milk yield in the PG group and FRS group were similar and higher than those in RS group (p<0.05). The concentration of propionic acid and total volatile fatty acid in the RS group tended to be lower than those in PG group (p<0.10). There were no differences in rumen pH value and ammonia nitrogen level among the groups tested. Conclusion: Fermentation of rice straw by spent Pleurotus sajor-caju mushroom substrate could substantially enhance its feeding value to be equivalent to PG as an effective fiber source for dairy goat. The fermented rice straw is recommended to account for 15% in diet dry matter.

• Nuclear Engineering and Technology
• /
• v.54 no.1
• /
• pp.162-176
• /
• 2022

In Lead-based reactor (LBR) severe accident, the meltdown and migration inside the reactor core will lead to fuel fragment concentration, which may further cause re-criticality and even core disintegration. Accurately predicting the migration and solidification behavior of melt in LBR severe accidents is of prime importance for safety analysis of LBR. In this study, the Moving Particle Semi-implicit (MPS) method is validated and used to simulate the migration and solidification behavior. Two main surface tension models are validated and compared. Meanwhile, the MPS method is validated by the L-plate solidification test. Based on the improved MPS method, the migration and solidification behavior of melt in LBR severe accident was studied furthermore. In the Pb-Bi coolant, the melt flows upward due to density difference. The migration and solidification behavior are greatly affected by the surface tension and viscous resistance varying with enthalpy. The whole movement process can be divided into three stages depending on the change in velocity. The heat transfer of core melt is determined jointly by two heat transfer modes: flow heat transfer and solid conductivity. Generally, the research results indicate that the MPS method has unique advantage in studying the migration and solidification behavior in LBR severe accident.