• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 춘계학술대회 초록집
• /
• pp.57.2-57.2
• /
• 2011

In this study, the effects of shear flows around a 2-dimensional airfoil, S809 on its aerodynamic characteristics were analyzed by CFD simulations. Various parameters including reference inflow velocity, shear rate, angle of attack, and cord length of the airfoil were examined. From the simulation results, several important characteristics were found. Shear rate in a flow makes some changes in the lift coefficient depending on its sign and magnitude but angle of attack does not have a distinguishable influence. Cord length and reference inflow also cause proportional and inversely proportional changes in lift coefficient, respectively. We adopted an analytic expression for the lift coefficient from the thin airfoil theory and proposed a modified form applicable to the traditional load analysis procedure based on the blade element momentum theory. Some preliminary results applied to an well known load simulation software, FAST, are presented.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.346-351
• /
• 2003

In this paper, an evaluation method of fracture toughness on interface cracks has been investigated under various mixed-mode conditions of the bonded scarf joints. Two types of the bonded scarf joints with an interface crack were prepared to analyze the stress intensity factors using boundary element method(BEM) and to perform the fracture toughness test. From the results of fracture toughness experiments and BEM analysis, an evaluation method of fracture toughness on interface cracks in the bonded components of dissimilar materials has been proposed and discussed.

• 대한기계학회논문집A
• /
• 제32권9호
• /
• pp.713-719
• /
• 2008

Most of the MEMS parts are made of multi-grain silicon wafer, which is the orthotropic material and its material direction is arbitrary. The reliability of the parts must be guaranteed in order to use for the commercial usage. The need of the structural analysis of its parts emerges an important factor. The material properties of the MEMS parts are calculated by the numerical method in order to reduce a material test. In this study, the effective elastic modulus and its Poisson's ratio are calculated by the boundary element method(BEM) and are compared with the results by the finite element method(FEM).

• Structural Engineering and Mechanics
• /
• 제31권3호
• /
• pp.349-365
• /
• 2009

Membrane structures are quite sensitive to wind and therefore the fluid-solid interaction can not be neglected in dynamic analysis. A boundary element method (BEM) for 3D simulation of wind-structure interaction in tensile membrane structures is presented in this paper. The flow is treated as incompressible and potential. The flow field is solved with boundary element method codes and structural simulation is performed by finite element method software ANSYS. The nonlinear equations system is solved iteratively, with segregated treatment of the fluid and structure equations. Furthermore this method has been demonstrated to be effective by typical examples. Besides, the influence of several parameters on the wind-structure interaction, such as rise-span ratio, prestress and the wind velocity are investigated according to this method. The results provide experience in wind resistant researches and engineering.

• 소음진동
• /
• 제9권1호
• /
• pp.131-140
• /
• 1999

A method to reconstruct the sound field around a Korean bell is developed. The sound radiation problem is formulated based on the boundary element method by using the algorithm of the acoustical holography. Sound pressures at the hologram surface are measured and used as input data for the analysis program that was developed in this study. An error minimization scheme is presented to overcome difficulties that arise in the backward reconstruction of the BEM-based acoustical holography In the model fictitious source surfaces were also introduced to reduce the complexity stemmed from the source shape. The sound field associated with the (4.0) vibrational mode of the Korean bell was visualized and verified experimentally.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1995년도 춘계학술대회논문집; 전남대학교, 19 May 1995
• /
• pp.184-189
• /
• 1995

자동차 흡배기계의 음향성능 해석에 일반적으로 사용되고 있는 방법은 평면과 이론에 의한 1차원적인 해석방법이다. 그러나 관심 주파수 대역이 높거나 대상물의 형상이 복잡한 경우, 또는 내부에 흡음재가 부착되어 있는 경우에는 이러한 1차원 해석으로는 만족할만한 결과를 얻을 수 없으므로 경계요소법(BEM), 유한요소법(FEM) 등과 같은 수치해석 방법이 이용되고 있다. 본 연구에서는 축대칭 단순팽창형, 연장관형, 다공형등 반사형 소음기와 흡음형 소음기의 음향성능을 해석하기 위한 경계요소법 프로그램을 개발하고, 소음기 성능의 주파수 특성을 구하여 실험결과 및 1차원 해석 결과와 비교 고찰하였다.

• 한국전자파학회지:전자파기술
• /
• 제5권3호
• /
• pp.14-21
• /
• 1994

본 논문에서는 임의의 형태와 매질성분을 갖는 3차원 물체의 RCS(Radar Cross Section)를 구하기 위한 수 치켜 방법을 제시한다 RSC는 3차원 경계요소볍(3-DBEM)을 사용하여 다충산란체에 관한 표면적분방정식을 해석함으로서 구한다. 본 논문에서는 3차원적 경계요소법의 타당성과 유용성을 보이기 위하여 산란체의 형태를 비스듬한 입사전계로 부터 다충 정6변체 및 직6면체를 선택하였으며, 손실을 갖는 유전체 및 자성체의 경우에도충분히 적용될수 있도록 고찰하였다.

• The Journal of the Acoustical Society of Korea
• /
• 제24권2E호
• /
• pp.38-45
• /
• 2005

The noise reduction of the In-The-Ear (ITE) hearing aid (HA) can be achieved by arrays of microphones. Each of the right and the left ears was assumed to have two HA microphones. These arrays of HA microphones produce particular patterns of directivity by some time delay between two microphones. The directivity pattern geometrically increase the S/N ratio. The boundary element method (BEM) was used for the three dimensional simulation of the HA directivity pattern with the two pairs' microphone arrays. The separation between two microphones was fixed to 10 mm. The time delay between the two microphones was calculated to produce the most narrow directivity pattern in the fore front of the head. The variation of the time delay was examined in accordance with input frequencies. This numerical analysis may be then applied for the calculation of the time delay parameter of the digital hearing aid DSP chip.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 춘계학술대회
• /
• pp.53-55
• /
• 2013

마이크로파 소자 및 각종 전파환경 해석을 위해서는 MoM, TLM, FEM, BEM 등의 다양한 전자계해석 수법을 이용할 수 있다. 본 연구에서는 자바 기반 병렬화 기법을 토대로 구현된 수치 시뮬레이터를 개발하고 그 성능을 평가하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.370-374
• /
• 1988

This paper is concerned with the investigation of the impurity redistribution process in a two step diffusion. In integrated circuit technology, two step boron diffusion involving a deposition step followed by a drive-in step in commonly encounted. The drive-in process is usually performed in oxidizing atmosphere resulting in redistribution of impurity (boron) within the semiconductor. This paper proposes a new numerical analysis method; Bounary Element Method to determine impurity profile at the arbitrary point in domain by its coordinate and boundary value.