• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.4
• /
• pp.140-146
• /
• 2010

An experimental study was carried out to investigate the emission characteristics for various alternative fuels in a 2.0 liter 4-cylinder turbo-charged diesel engine. The conventional diesel fuel, neat GTL (Gas to Liquid), blends of diesel and biodiesel(BD20), and blends of GTL and biodiesel(G+BD20 and G+BD40) were applied, and their emission characteristics were compared at various steady-state engine operating conditions. A noticeable reduction of exhaust emissions compared to conventional diesel fuel, except for NOx emission, was observed for G+BD40, where there is a maximum 30% averaged reduction for gaseous emissions (THC and CO) and 70% for PM mass concentrations. When comparing PM size distributions for biodiesel blended fuels, the PM number concentration in accumulation mode, where the diameter of PM is greater than 50 nm, decreased due to additional oxygen content in the biodiesel fuel; in nucleation mode, where the diameter of PM is less than 50nm, there was a slight increase or decrease in the PM number concentration depending on the amount of oxygen available in the combustion chamber.

• Economic and Environmental Geology
• /
• v.57 no.1
• /
• pp.17-23
• /
• 2024

Ground penetrating radar (GPR) survey is a geophysical method that utilizes electromagnetic waves reflecting from a boundary where the electromagnetic property changes. As the frequency of the antenna is about 25 MHz ~ 1 GHz, it is effective to acquire high resolution images of underground pipe, artificial structure, underground cavity, and underground structure. In this study, we analyzed the change of signals reflected from the same underground objects according to the arrangement of transceiver antennas used in ground penetrating radar survey. The antenna used in the experiment was 200 MHz, and the survey was performed in the vertical direction across the sewer and the parallel direction along the sewer to the sewer buried under the road, respectively. A total of five antenna array methods were applied to the survey. The most used arrangement is when the transmitting and receiving antennas are all perpendicular to the survey line (PR-BD). The PR-BD arrangement is effective when the object underground is a horizontal reflector with an angle of less than 30°, such as the sewer under investigation. In this case study, it was confirmed that the transmitter and receiver antennas perpendicular to the survey line (PR-BD) are the most effective way to show the underground structure. In addition, in the case where the transmitting and receiving antennas are orthogonal to each other (XPOL), no specific reflected wave was observed in both experiments measured across or parallel to the sewer. Therefore, in the case of detecting undiscovered objects in the underground, the PR-BD array method in which the transmitting and receiving antennas are aligned in the direction perpendicular to the survey line taken as a reference and the XPOL method in which the transmitting and receiving antennas are orthogonal to each other are all used, it can be effective to apply both of the above arrangements after setting the direction to 45° and 135°.

• Textile Coloration and Finishing
• /
• v.28 no.1
• /
• pp.40-47
• /
• 2016

As a coating material for loudspeaker dampers, resilient polyurethane/epoxy hybrid resins were synthesized to replace conventional phenol resin and examined the physical properties, which are not only environmentally friendly but also not harmful to human. Five types of polyurethane resins were synthesized in the step-shot method using methylene diisocyanate, three polyols such as poly tetramethylene ether glycol(PTMEG, MW:2000), poly(1,4-buthylene adipate(PBAP, MW:2000), and poly carbonatediol(PCD, MW:2000), and three chain extenders such as ethylene glycol(EG), neopentyl glycol(NPG), and 1,4-buthandiol(1,4-BD). The five types of synthesized polyurethane resins and commercially available bisphenol A type epoxy resin were blended in weight ratios of 90:10, 70:30, and 50:50 to synthesize 15 types of polyurethane/epoxy hybrid resins. Among the polyurethane resins, the one that was synthesized using PCD and 1,4-BD showed excellent tensile strength, 100% modulus, low extension, and relatively high viscosity. Polyurethane/epoxy hybrid resins with higher epoxy resin contents showed better thermal properties and water resistance while those with higher polyurethane contents showed higher flexibility. The polyurethane/epoxy hybrid resin made by blending the polyurethane based on PCD and 1,4-BD with a bisphenol A type epoxy resin in a weight ratio of 70:30 was identified to be the most suitable to be used in speaker dampers.

• Geomechanics and Engineering
• /
• v.30 no.5
• /
• pp.401-411
• /
• 2022

To obtain the dynamic mechanical properties, fracture modes, energy and brittleness characteristics of Furong Baijiao coal rock, the dynamic impact compression tests under 0, 4, 8 and 12 MPa confining pressure were carried out using the split Hopkinson pressure bar. The results show that failure mode of coal rock in uniaxial state is axial splitting failure, while it is mainly compression-shear failure with tensile failure in triaxial state. With strain rate and confining pressure increasing, compressive strength and peak strain increase, average fragmentation increases and fractal dimension decreases. Based on energy dissipation theory, the dissipated energy density of coal rock increases gradually with growing confining pressure, but it has little correlation with strain rate. Considering progressive destruction process of coal rock, damage variable was defined as the ratio of dissipated energy density to total absorbed energy density. The maximum damage rate was obtained by deriving damage variable to reflect its maximum failure severity, then a brittleness index BD was established based on the maximum damage rate. BD value declined gradually as confining pressure and strain rate increase, indicating the decrease of brittleness and destruction degree. When confining pressure rises to 12 MPa, brittleness index and average fragmentation gradually stabilize, which shows confining pressure growing cannot cause continuous damage. Finally, integrating dynamic deformation and destruction process of coal rock and according to its final failure characteristics under different confining pressures, BD value is used to classify the brittleness into four grades.

• Journal of Information Technology Applications and Management
• /
• v.30 no.2
• /
• pp.1-18
• /
• 2023

Recently, as technology development has accelerated and product life cycles have been shortened, it is necessary to derive key product features from customers in the R&D planning and evaluation stage. More companies want differentiated competitiveness by providing consumer-tailored products based on big data and artificial intelligence technology. To achieve this, the need to correctly grasp the required quality, which is a requirement of consumers, is increasing. However, the existing methods are centered on suppliers or domain experts, so there is a gap from the actual perspective of consumers. In other words, product attributes were defined by suppliers or field experts, but this may not consider consumers' actual perspective. Accordingly, the demand for deriving the product's main attributes through reviews containing consumers' perspectives has recently increased. Therefore, we propose a review data analysis-based required quality methodology containing customer requirements. Specifically, a pre-training language model with a good understanding of Korean reviews was established, consumer intent was correctly identified, and key contents were extracted from the review through a combination of KeyBERT and topic modeling to derive the required quality for each product. RevBERT, a Korean review domain-specific pre-training language model, was established through further pre-training. By comparing the existing pre-training language model KcBERT, we confirmed that RevBERT had a deeper understanding of customer reviews. In addition, all processes other than that of selecting the required quality were linked to the automation process, resulting in the automation of deriving the required quality based on data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.5
• /
• pp.501-505
• /
• 2008

In this paper, we present a multi-turn circular loop antenna for portable terrestrial DMB. In order to satisfy the two contradictory requirements of small antenna size and high receiving capability, the proposed antenna's diameter and turns are fixed to be 4 mm and 80 turns, respectively and its quality factor $\mathcal{Q}$ is set 1 in order to have high transfer function. The fabricated antenna length is 30 mm as small and its measured gain is -15 dBd. The antenna receiving power is verified by measurement very comparable with the receiving power of a commercial terrestrial DMB monopole antenna of length 190 mm.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.4
• /
• pp.863-868
• /
• 2009

New spiro[fluorene-7,9′-benzofluorene]-based blue host material, 5-phenyl-spiro[fluorene-7,9′-benzofluorene] (BH-1P), was successfully prepared by reacting 5-bromo-spiro[fluorene-7,9′-benzofluorene] (1) with phenyl boronic acid through the Suzuki reaction. 5-(N,N-Diphenyl)amino-spiro[fluorene-7,9′-benzofluorene] (BH-1DPA) and diphenyl-[4-(2-[1,1;4,1]terphenyl-4-yl-vinyl)-phenyl]amine (BD-1) were used as dopant materials. 2,5-Bis-(2',2"- bipyridin-6-yl)-1,1-diphenyl-3,4-diphenylsilacyclopentadiene (ET4) and Alq3 were used as electron transfer materials. Their UV absorption, photoluminescence and thermal properties were examined. The blue OLEDs with the configuration of ITO/DNTPD/$\alpha$-NPD/BH-1P:5% dopant/$Alq_3$ or ET4/LiF-Al prepared from the BH-1P host and BH-1DPA and BD-1 dopants showed a blue EL spectrum at 452 nm at 10 V and a luminance of 923.9 cd/$m^2$ with an efficiency of 1.27 lm/W at a current density of 72.57 mA/$cm^2$.

• Journal of Environmental Science International
• /
• v.30 no.7
• /
• pp.537-545
• /
• 2021

This study aimed to investigate the improvement effect of 5% (w/w) mung bean (Phaseolus aureus L.) on lipid composition and protein concentration in hyperlipidemic rats. Seven-week-old male (Sprague-Dawley) rats were divided into four groups (n=6, each), and fed experimental diets containing mung bean meal [basal diet+5% (w/w) mung bean (BM), basal-hyperlipidemic diet+5% (w/w) mung bean (BHM)], basal-hyperlipidemic diet (BH), and control (basal diet, BD). Lipid composition in the mung bean diet groups (BM and BHM) evidenced significant reductions in serum total cholesterol, low-density lipoprotein cholesterol, atherosclerotic index, cardiac risk factor, triglyceride, phospholipid, free cholesterol, cholesteryl ester, blood glucose, nonesterified fatty acid, and an elevation in high-density lipoprotein cholesterol. The serum albumin/globulin ratio was increased in mung bean diet-supplemented rats compared to that in hyperlipidemic rats (p < 0.05). Total calcium, phosphorus and potassium concentrations in sera were higher in the BM, BHM and BD groups than in the BH group. Concentrations of sodium and chlorine in sera were lower in the mung bean diet-supplemented groups than in the hyperlipidemic group. The in vivo experiments showed that ingestion of mung bean was effective in improving lipid composition, protein concentration, and blood glucose.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.826-835
• /
• 2018

The aim of the study was to investigate the influences of sodium fluoride on the body weight, lipid metabolism functional improvement, blood glucose level, protein component in the sera of rats which fed experimental diets for 5 weeks. Body weight gain of rats was higher in the NF25 group, NF30 group and NF50 group showed a significant difference from the basal diet group (BD group). The changes of the liver and the heart of each argan weights were observed compared to the BD group tends to appear lower in the oral NaF groups (p<0.05). Organ weight of each group of the others showed no significant difference (p<0.05). Serum concentrations of total cholesterol, low-density lipoprotein (LDL)-cholesterol, free cholesterol, triglyceride (TG), phospholipid (PL) and blood glucose were lower in BD group than basal diet plus sodium fluoride groups. Conversely depending on the concentration of sodium fluoride for the high-density lipoprotein (HDL)-cholesterol level, it showed lower results. Serum total protein was observed low showed a significant difference in the NF50 group, there was no significant difference in the other groups (p<0.05). globulin and albumin concentration levels also showed the lowest results in the NF50 group.

• Fashion & Textile Research Journal
• /
• v.21 no.3
• /
• pp.308-317
• /
• 2019

This study provided data for classifying and characterizing the lower half of the body shape for obese adult men in their 30s and 40s. Data of 492 adult males who were obese with a WHO criteria of >25 BMI were used for analysis. The results of the study are as follows. Six factors extracted from the factorial analysis as independent factors for cluster analysis were classified into three types. Type 1 (65.4%) had the lowest height of the lower half of the body with short circumference and length. Type 2 (20.3%) had the lowest height of the lower half of the body with the largest thickness, width and circumference from the back to the hip, but short in length. Type 3 (14.2%) had the lowest height of the lower half of the body with medium height and waist-height; however, the curve from the waist to the hip was the largest with the largest waist circumference, hip circumference, and width and thickness of the lower half of the body. This study will help to design a slack pattern that utilizes body shape characteristics of men in their 30s and 40s. In a follow-up study, we analyze the slack pattern and educational pattern by the company and study the necessity for a slack pattern for obese males.