• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6B
• /
• pp.440-449
• /
• 2008

This paper is to analyze the feasibility of area of agricultural and fishing village as the link of the broadband convergence network(BcN) build-up. For the project feasibility analysis, we utilized the questionnaire of experts and drew the new index of evaluation. By using the AHP technique, we evaluated the feasibility. And by reviewing precedent papers and references, it drew proper evaluation criteria and evaluated BcN feasibility using AHP; economic feasibility, technological feasibility and policy feasibility were figured out as main criteria and resulted evaluation criteria for BcN feasibility. As a result, we found the business enforcement was exposed to be apposite and inconsistency index showing the reliability of the analysis was showed up lowly as 0.0566. Afterward, the BcN business of construction contribute to the living improvement of a nation. Moreover, there will be a value as the basic materials for reasonably propelling the BcN project.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.1
• /
• pp.12-17
• /
• 2009

In this paper, We play it for the purpose of study about the power amplifier which applied DGS and adaptive bias circuit structure to general Doherty amplifier for the efficiency of a RF power amplifier and a linearity improvement in the WiBro band. As for the IMD3, 3.4dBc was improved with -26.3dBc when we did the measurement result existing Doherty power amplifier and comparison of the Doherty power amplifier which applied an adaptive bias circuit and the DGS which proposed in this paper, and the mean power efficiency verified what was increased in 37%. Also, we were able to know PAE of 36.6% with output power 34.0dBm in P1dB when magnitude of an input signal was 25.6dBm. we did 6dB back off in output P1dB in order to confirm the ACPR which was a nonlinear characteristic and measured the ACPR. we showed the -34.55dBc which was a value of -34.5dBc or below in the 4.77MHz off-set that was a transmission standard. Therefore, we were able to know that we were satisfied with a spectrum mask standard.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.122-128
• /
• 2023

This paper proposes two kinds of single-balanced direct conversion quadrature receivers using selfoscillating LMVs in which the voltage-controlled oscillator (VCO) itself operates as a mixer while generating an oscillation. The two LMVs are complementary coupled and series coupled to generate the quadrature oscillating signals, respectively. Using a 65 nm CMOS technology, the proposed quadrature receivers are designed and simulated. Oscillating at around 2.4 GHz frequency, the complementary coupled quadrature receiver achieves the phase noise of -28 dBc/Hz at 1KHz offset and -109 dBc/Hz at 1 MHz offset frequency. The other series coupled receiver achieves the phase noise of -31 dBc/Hz at 1KHz offset and -109 dBc/Hz at 1 MHz offset frequency. The simulated voltage conversion gain of the two single-balanced receivers is 37 dB and 45 dB, respectively. The double-sideband noise figure of the two receivers is 5.3 dB at 1 MHz offset. The quadrature receivers consume about 440 μW dc power from a 1.0-V supply.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.17 no.4
• /
• pp.379-386
• /
• 1997

Recombinant plasmid, pBKH4, containing NPT II and P35S-BcHSP17.6 was constructed by ligation of Bum H I -digested pBKSl-l and BcHSP 17.6 (thermotolerance gene) 6om pBLH4. The tobacco leaf disc was cocultivated with transformed Agmbacterium tumefaciens bearing pBKH4 for 24 hours and transformed shoots were selected on MS-n/B medium containing $100\;{\mu\textrm{g}}/ml$ of kanamycin. Heat-killing temperature of Nicotima tabacum was $50^{\circ}$ for >15min, and transformed tobacco plants with BcHSP17.6 cDNA exhibited thermotolerance at the heat-killing temperature. The transgenic plants were analyzed by Southern blot hybridization with the probe of ${\alpha}^{_32}P$ labelled BcHSP17.6 cDNA. Transcription and expression level of BcHSP17.6 cDNA were also continued by Northern blot analysis and Ouchterlony double immunodiffusion assay. In this study, we suggest that the BcHSP17.6 cDNA introduced to tobacco plant is related to thenuoto-lerance and 17.6-kD LMW HSP acts as a protector from heat damage in plants.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12B
• /
• pp.1013-1021
• /
• 2004

Recently, there have been the rapid increasing needs to integrate high-speed communications and digital TV in home network. To realize the integration of those services, the MIC formulated the broadband convergence network (BcN) plan as one of the new growth engines. The BcN will be implemented by FTTH solutions and these solutions are designed to support digital home network. To develop and promote the BcN, we need to find the bandwidth requirements for home network. This paper will examine the bandwidth requirements in detail to accommodate data traffics for high-speed communications and TV at building intra network and home intra network.

• Korean journal of food and cookery science
• /
• v.17 no.6
• /
• pp.589-597
• /
• 2001

This study was conducted to develop a standardized Korean cold noodle stock recipe which can be used in food service establishments. The qualities of three kinds of stock made of beef rib only(B group), beef rib added with chicken(BC group), and beef rib added with chicken and vegetable(BCV group) were investigated by using sensory evaluation and instrumental analyses for free amino acids and nucleotides during heating (2, 3, 4, and 6 hr) at 90$\pm$ 5$\^{C}$ The highest amino acid contained in B, BCV, and BCV groups was arginine followed by alanine, glycine, and glutamic acid. B and BC groups was extracted to the best contents of amino acids by heating for 4 hours but BCV group for 3 hours. Nucleotides were extracted from B and BC group between 3 and 4 hours of heating but in BCV group between 2 and 3 hours. In sensory evaluation, BCV group obtained the highest score for overall preference. In the measurement of color difference, BCV group was the lowest in L value(lightness) but the highest in b value(yellowness).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.6
• /
• pp.959-968
• /
• 2000

In this paper, a low phase noise frequency synthesizer used to TX local oscillator in BWLL RF tranceiver is presented. The phase-locked stable 25GHz-band frequencies in BWLL TX LO are obtained by using 2 GHz baseband frequency synthesizer, sixth-harmonic frequency multiplier and frequency doubler at 12 GHz band frequency input. The 25 GHz band frequency synthesizer presented in this paper has 3-output frequencies at 24.92 GHz, 25.10 GHz, 25.26 GHz. At 24.92 GHz frequency the synthesizer has 0.44 dBm output power and shows -87.93 dBc/Hz(a 10 KHz), -109.54 dBc/Hz (a100 KHz) phase noise characteristics .

• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.236-244
• /
• 2003

In this paper, RF and IF circuits for mobile terminals which have usually been implemented using expensive BiCMOS processes are designed using CMOS circuits, and a Tx CMOS RF/IF single chip for PCS applications is designed. The designed circuit consists of an IF block including an IF PLL frequency synthesizer, an IF mixer, and a VGA and an RF block including a SSB RF mixer and a driver amplifier, and performs all transmit signal processing functions required between digital baseband and the power amplifier. The phase noise level of the designed IF PLL frequency synthesizer is -114dBc/Hz@100kHz and the lock time is less than $300{\mu}s$. It consumes 5.3mA from a 3V power supply. The conversion gain and OIP3 of the IF mixer block are 3.6dB and -11.3dBm. It consumes 5.3mA. The 3dB frequencies of the VGA are greater than 250MHz for all gain settings. The designed VGA consumes 10mA. The designed RF block exhibits a gain of 14.93dB and an OIP3 of 6.97dBm. The image and carrier suppressions are 35dBc and 31dBc, respectively. It consumes 63.4mA. The designed circuits are under fabrication using a $0.35{\mu}m$ CMOS process. The designed entire chip consumes 84mA from a 3V supply, and its area is $1.6㎜{\times}3.5㎜$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.9
• /
• pp.560-562
• /
• 2014

Broadband power divider operating over the frequency band assigned for all domestic mobile communications is designed and implemented. The implemented power divider with 20Watts power rating has the maximum insertion loss of 3.49dB, input reflection coefficient of below -18.48dB and output reflection coefficient of below -20.2dB, above 24.7dB isolation and -141.2dBc of 3rd PIMD over the operating frequency of 810 ~ 2620MHz.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.327-330
• /
• 2007

This article discusses a capacity planning method in QoS-guaranteed IP networks such as BcN (Broadband convergence Network). Since IP based networks have been developed to transport best-effort data traffic, the introduction of multi-service component in BcN requires fundamental modifications in capacity planning and network dimensioning. In this article, we present the key issues of the capacity planning in multi-service IP networks. To provide a foundation for network dimensioning procedure, we describe a systematic approach for classification and modeling of BcN traffic based on the QoS requirements of BcN services. We propose a capacity planning framework considering data traffic and real-time streaming traffic separately. The multi-service Erlang model, an extension of the conventional Erlang B loss model, is introduced to determine required link capacity for the call based real-time streaming traffic. The application of multi-service Erlang model can provide significant improvement in network planning due to sharing of network bandwidth among the different services.