• Tunnel and Underground Space
• /
• v.14 no.1
• /
• pp.54-68
• /
• 2004

In this study, scaled model tests were performed on blasting demolition of reinforced concrete structures and the experimental results were analyzed in comparison with the results of numerical analysis. The tests were designed to induce a progressive collapse, and physical properties of the scaled model were determined using scale factors obtained ken dimension analysis. The scaled model structure was made of a mixture of plaster, sand and water at the ratio determined to yield the best scaled-down strength. Lead wire was used as a substitute for reinforcing bars. The scaled length was at the ratio of 1/10. Selecting the material and scaled factors was aimed at obtaining appropriately scaled-down strength. PFC2D (Particle Flow Code 2-Dimension) employing DEM (Distinct Element Method) was used for the numerical analysis. Blasting demolition of scaled 3-D plain concrete laymen structure was filmed and compared to results of numerical simulation. Despite the limits of 2-D simulation the resulting demolition behaviors were similar to each other. Based on the above experimental results in combination with bending test results of RC beam, numerical analysis was carried out to determine the blasting sequence and delay times. Scaled model test of RC structure resulted in remarkably similar collapse with the numerical results up to 900㎳ (mili-second).

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.200-214
• /
• 1993

This paper presents the results of fluidelastic instability analysis performed for the U-tube bundle of a Westinghouse model 51 steam generator, one of the recirculating types designed at an early stage, in which the principal region of external cross-flow is associated with the U-bend portion of tube. The prerequisites for this analysis are detailed informations of the secondary side flow conditions in the steam generator and the free vibration behaviours of the U-tubes. In this study, the three-dimensional two-phase flow field in the steam generator has been calculated employing the ATHOS3 steam generator two-phase flow code and the ANSYS engineering analysis code has been used to calculate the free vibration responses of specific U tubes under consideration. The assessment of the potential instability for the suspect U-tubes, which is the final analysis process of the present work, has been accomplished by combining the secondary side velocity and density distributions obtained from the ATHOS3 prediction with the relative modal displacement and natural frequency data calculated using the ANSYS code. The damping of tubes in two-phase flow has been deduced from the existing experimental data by taking into account the secondary side void fraction effect. In operation of the steam generator, the tube support conditions at the tube-to-tube support plate intersections due to either tube denting degradation or deposition of tube support plate corrosion products or ingression of dregs. Thus, various hypothetical cases regarding the tube support conditions at the tube-to-tube support plate intersections have been considered to investigate the clamped support effects on the forced vibration response of the tube. Also, the effect of anti-vibration bars support in the curved portion of tube has been examined.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.1
• /
• pp.37-47
• /
• 2009

This study develops a technique training program to enhance the completion of Kolman, the high air flight technique, and applies it to two national athletes of the horizontal bar, one of the gymnastic events, for eight weeks. After that, their improvement was measured through 3D motion analysis to help them elevate their performance. The training program includes swing, hand release, twist, and bar hold, and its implementation produced the results stated below. They were made to practice the motion in the following way. After the hand-standing of giant swing which initiates the motion, they lift their body upward a little bit more. Next, they take their body down almost like a vertical descent and make a deep tap swing. Instead of doing the tap swing which widens the flection of hip and shoulder joints, while body revolution is more emphasized in particular, they release the bar as raising the centroid of their body sufficiently. During the flight, they try to narrow every joint in their body. As a result, the bar's elasticity becomes greatly increased, and since the backing rate of their body gets higher, the centripetal force of the swing is improved that they can release the bar in the higher position. In addition, because they can erect their body faster during the flight, they can perform comfortable twist and revolution in the air. They can also adjust the direction of the flight easily without too much concern for the proper timing of hand release as they rise. Thereby, they can not only maintain adequate distance from the bar for the bar hold but also ensure enough distance for body revolution and twist.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1140-1144
• /
• 2007

모래하천과 자갈하천의 하중도에 성립한 식생을 분석하여 하천복원과 복원된 하천의 사후 관리에서 요구되는 생태정보를 구축하였다. 모래하천의 하중도에는 버드나무군락, 물억새군락, 산조풀군락, 속속이풀군락, 큰개여뀌군락, 밭뚝외풀군락 등이 성립하였다. 이러한 식생자료를 서열법으로 처리한 결과, 식물의 배열은 천이경향을 반영하였고, 하중도의 미지형에 의해 결정된 지하수위 높이가 천이단계를 지배하는 것으로 판단되었다. 모래하천인 용수천의 하중도에서 상류로부터 하류를 향해 식생의 분포는 버드나무군락-물억새군락-산조풀군락-속속이풀군락의 순서를 보였다. 우점종의 생활형에 따라 이들을 구분하면, 이 순서는 목본 식물군락-다년생 식물군락-1년생 식물군락의 순서를 보였다. 이러한 식생의 배열로부터 하중도는 하류 방향으로 새로 생성되고 있음을 알 수 있었다. 자갈하천의 하중도에는 발달단계가 다른 세 개의 소나무군락과 초지가 성립하였다. 소나무군락은 유령림, 성숙목과 유령목이 혼합된 복층림, 그리고 성숙림으로 이루어졌다. 초지는 쑥, 달뿌리풀, 환삼덩굴, 소나무 실생, 황철나무 등이 산재하는 밀도가 낮은 식생으로 이루어졌다. 이러한 식생자료를 서열법으로 처리한 결과 여기에서도 식생의 배열은 천이경향을 반영하였다. 천이단계를 지배하는 요인은 홍수에 밀려온 자갈의 피복율로 나타났다. 상류로부터 하류를 향해 식생의 분포는 초지, 소나무 유령림, 소나무 복층림 및 소나무 성숙림의 순서를 보였다. 이러한 식생의 배열로부터 하중도는 상류방향으로 새로 성립하고 있음을 알 수 있었다.변지역에 거주하는 주민의 역할이 중요하며, 이에 따라 보 철거 선정 체계는 보 철거를 위해서 보 주변 지역 거주민을 설득하며, 하천의 환경 개선을 위한 합리적인 대안 제시를 목적으로 하고 있다. 선정 체계를 바탕으로 주민 협의 및 대안 제시를 통해 결정된 대상 보는 선정 체계 안에서 보 철거 영향 판단 절차에 따라서 보 철거로 인한 수문, 수리, 지형, 수질, 생태 영향을 판단하게 되며, 이와 더불어 사회 경제적인 영향을 평가하게 된다. 평가결과에 따라서 보를 완전히 철거하거나 다른 대안을 고려하여 보를 부분적으로 철거하거나 개량하게 된다.곳으로 1/3의 자기 생산을 담당하고 있었다. $\ulcorner$경상도지리지$\lrcorner$(慶尙道地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와 동년대에 동일한 목적으로 찬술되었음을 알 수 있다. $\ulcorner$경상도실록지리지$\lrcorner$(慶尙道實錄地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와의 비교를 해보면 상 중 하품의 통합 9개소가 삭제되어 있고, $\ulcorner$동국여지승람$

• Journal of Conservation Science
• /
• v.25 no.3
• /
• pp.323-333
• /
• 2009

The Jincheonsagongnimaaeyeoraeipsang is a great stone relief Buddha in Goryeo Dynasty, transmitting sculptural styles of the Silla Kingdom. The Buddha was carved on the biotite granite basement, and was undergone cleaning treatment in 2007. The basement rock was opened in plenty cracks bringing out structural instability. And the top of the basement rock was colonized by trees obstructing sunshine and raising humidity. As a result of failure analysis, the basement rock of the Buddha had a major possibility of wedge failure in the parts of the face, hands and cloths. Therefore, the cracks were filled up with epoxy resin L-50, and titanium bars and wire ropes were applied to bind cracked rock blocks. The surface of the crack filler was colored by granite and talc powder with inorganic pigment and L-30. The crack meters were installed on the stone relief Buddha to monitor further behavior, lastly.

• Economic and Environmental Geology
• /
• v.22 no.3
• /
• pp.253-266
• /
• 1989

The Cu-Pb-Zn-Ag hydrothermal vein type deposits which comprise the Dongil and Dong-cheogogsan mines occur within the Cretaceous sedimentary rocks in the Euiseong Basin of the southern Korean peninsula. The ore mineralization is contained within three stage(I,II and III) quartz and calcite veins. Ore minerals occur as dominant chalcopyrite, galena, sphalerite, tetrahedrite and Pb, Ag, Sb and Bi-bearing sulfosalts. Stage I ore minerals were deposited between $400^{\circ}C$ and $200^{\circ}C$ from the fluid with moderate salinities(7.0 to 4.5 eq. wt. % NaCl). Evidence of boiling suggests pressure of less than 150 bars during stage I mineralization. This pressure corresponds to maximum depths of 650 m and 1700 m, respectively, assuming lithostatic and hydrostatic loads. The data on mineralogy, temperature and salinity, together with information on the solubility of Cu complex, suggest that Cu deposition is a result of boiling coupled with declining temperature from $350^{\circ}$ to $250^{\circ}C$ or declining log $a_{o_2}$(from -29.8 to -35.9 atm.)and increasing in pH. Pb, Ag, Sb and Bi-bearing sulfosalts were deposited by cooling and dilution at temperature of less than $250^{\circ}C$ from the ore fluid with less than -35.9 atm. of log $a_{o_2}$.

• Journal of Elementary Mathematics Education in Korea
• /
• v.18 no.1
• /
• pp.105-122
• /
• 2014

In this paper, fraction division algorithms in Korean elementary mathematics textbooks are analyzed as a part of the groundwork to improve teaching methods for fraction division algorithms. There are seemingly six fraction division algorithms in ${\ll}Math\;5-2{\gg}$, ${\ll}Math\;6-1{\gg}$ textbooks according to the 2006 curriculum. Four of them are standard algorithms which show the multiplication by the reciprocal of the divisors modally. Two non-standard algorithms are independent algorithms, and they have weakness in that the integration to the algorithms 8 is not easy. There is a need to reconsider the introduction of the algorithm 4 in that it is difficult to think algorithm 4 is more efficient than algorithm 3. Because (natural number)${\div}$(natural number)=(natural number)${\times}$(the reciprocal of a natural number) is dealt with in algorithm 2, it can be considered to change algorithm 7 to algorithm 2 alike. In textbooks, by converting fraction division expressions into fraction multiplication expressions through indirect methods, the principles of calculation which guarantee the algorithms are explained. Method of using the transitivity, method of using the models such as number bars or rectangles, method of using the equivalence are those. Direct conversion from fraction division expression to fraction multiplication expression by handling the expression is possible, too, but this is beyond the scope of the curriculum. In textbook, when dealing with (natural number)${\div}$(proper fraction) and converting natural numbers to improper fractions, converting natural numbers to proper fractions is used, but it has been never treated officially.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.1-10
• /
• 2012

This paper presents an experimental result and suggests the confinement effect of headed cross tie in reinforced concrete(RC) columns subjected to cycling horizontal loads under constant axial load. Five RC columns specimens were manufactured, taking confined type of transverse reinforcement, whether or not using cross tie, end detail of cross tie (hooked or headed), and axial stress in column as major variables, Cyclic horizontal load applied to the columns under constant axial stress and the effect of cross tie to structural capacity of column was evaluated from the test. The column without cross tie failed showing bending deformation of hoop with crack in core concrete at low horizontal load while the column with cross tie showed quite improved strength and ductility by suppressing bending deformation of hoop as well as buckling of longitudinal bar at once even after crack in core concrete. At high lateral displacement, the column with hooked cross tie showed the failure pattern loosing the confining force of cross tie since the $90^{\circ}$ hooked part of cross tie was stretched out and the cracked core concrete lumps were came off. However, the column with headed cross tie showed very stable behavior since the head of cross tie effectively confined the hoop and longitudinal bars even at high lateral displacement.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.2
• /
• pp.161-169
• /
• 2011

Two-way slabs reinforced with high-performance steels, which have several practical advantages of a reduction of congestion in heavily reinforced members, savings in the cost of labor and repair, the higher corrosion resistance, and a reduction of construction time, were constructed and tested. The influences of the flexural reinforcement ratio, concentrating the reinforcement in the immediate column region, and using steel fiber-reinforced concrete (SFRC) in the slab on the punching shear resistance and post-cracking stiffness were investigated, and compared with the punching shear test results of the slabs reinforced with conventional steels and GFRP bars. In addition, the strain distribution of flexural reinforcements and crack control were investigated, and the effective width calculating method for the average flexural reinforcement ratio was estimated. The use of high-performance steel reinforcement increased the punching shear strength of slabs, and decreased the amount of flexural reinforcements. The concentrating the top mat of flexural reinforcement increased the post-cracking stiffness, and showed better strain distribution and crack control. In addition, the use of SFRC showed beneficial effects on the punching shear strength and crack control. It was suggest that the effective width should be changed to larger than 2 times the slab thickness from the column faces.

• The Journal of the Korea Contents Association
• /
• v.17 no.1
• /
• pp.507-521
• /
• 2017

Purpose: The purpose of this study is to examine the relationship between attitude toward death among Korean hostess (room salon/bar) in Busan and their suicide-related factors. Methods: The questionnaires were administrated to 120 Korean hostess. The questionnaires consist of 7 major concepts: death as liberation, death as natural phenomenon, fear of death, avoidance of thought about death, fear for the impact of death on family, frequency of thought of death, their capacities to resist suicidal impulses. Results: Interestingly, satisfaction for hostess working in room salons with their monthly incomes was negatively correlated with frequency of thought of death and was positively related to their capacities to resist suicidal impulse. Moreover, in terms of the factors influencing 'their capacities to resist suicidal impulse', for hostess working in room salons, 'fear for the impact of death on family,' and 'satisfaction with their monthly income' were found to significantly influence 'their capacities to resist suicidal impulses'. However, for hostess working at bars, 'death as liberation' was found to be the only one factor showing significant effect on 'their capacities to resist suicidal impulses'. Conclusion: For hostess working in room salons, their perceived monetary reward seems to affect their attitudes toward death and suicide-related thoughts. Understanding a person's attitudes toward death can be another way to help people in a difficult situation to prevent them from carrying out the worst.