• Elastomers and Composites
• /
• v.56 no.3
• /
• pp.172-178
• /
• 2021

The wear behavior of styrene-butadiene rubber (SBR) and butadiene rubber (BR) was investigated using a blade-type abrader with a steel blade (SB), Ti-coated tungsten carbide blade (TiB), or zirconia blade (ZB). The wear rate of SBR against SB and TiB decreased with increasing number of revolutions because of the blunting of the blades during wear. However, the wear rate of SBR against ZB remained nearly constant with little blade blunting. Generally, the wear rate of BR was largely unaffected by the blade material used for abrasion. The wear rate and frictional coefficient of SBR were found to be higher than those of BR at similar levels of frictional energy input. A power-law relationship was found between the wear rate and frictional energy input during abrasion. A well-known Schallamach pattern was observed for SBR, while a much finer pattern was observed for BR. The blade material affects the wear rate of the rubbers because the macromolecular free radicals and blade tend to undergo mechano-chemical reactions. The inorganic ZB was found to be the most inert for such a mechanism.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.1
• /
• pp.56.2-56.2
• /
• 2021

Constraining the structure and thus the fate of giant molecular clouds (GMCs), the primary sites of star formation in galaxies, is crucial to understand the evolution of galaxies themselves. Exploiting the unprecedented sensitivity and angular resolution of the Atacama Large Millimeter/sub-millimeter Array (ALMA), we have measured the spatially-resolved (~ 20 pc resolution) properties of the GMCs in two nearby late-type galaxies, NGC 5806 (SAB(s)b) and NGC 6753 ((R)SA(r)b), as part of the WISDOM project. Although these results are preliminary, we identified ~ 200 resolved GMCs in NGC 5806 within a radius of 500 pc, most within a nuclear ring structure, and ~ 400 resolved GMCs in NGC 6753 within a radius of 2 kpc, most within a flocculent spiral structure. The GMCs of NGC 5806 have similar sizes but slightly higher linewidths than clouds in the Milky Way disc. Because the GMCs also have higher surface densities, the calculated cloud Virial parameters are nevertheless about unity, suggesting that the GMCs of NGC 5806 are in gravitational equilibrium and thus long lived. This is contrary to other WISDOM results on earlier-type galaxies, where large cloud linewidths are likely due to shear associated with the local (circular) orbital motions (rather than the clouds' self-gravity), and the clouds are either marginally or not gravitationally bound. These results support the notion that spheroids alter the dynamical states of clouds (morphological quenching), that are otherwise (i.e. in galaxy discs) fairly homogenous and similar to those of the Milky Way.

• Korean Journal of Microbiology
• /
• v.49 no.1
• /
• pp.90-94
• /
• 2013

A new Bacillus strain designated as MP56 producing antimicrobial substance has been isolated from the mud flat of Korea. The strain MP56 was found to exhibit broad spectrum of antimicrobial activity against Gram-positive pathogenic microorganisms and MDR (multi drug resistant) strains. The 16S rRNA sequence revealed that the MP56 was closely related to Bacillus subtilis with 99.93% homology. The optimal medium composition for production of antimicrobial substance in the B. subtilis MP56 were 1% mannitol, 1% oat meal, 0.01% $CaCl_2$. Antimicrobial activity of the culture broth against different pathogenic strains was assessed using the antimicrobial spectrum. The result suggests that Bacillus strain MP56 produces high quality antimicrobial substance that might be very useful to control varieties of pathogenic microbial growth.

• Biomolecules & Therapeutics
• /
• v.20 no.1
• /
• pp.50-56
• /
• 2012

WIN-34B showed analgesic and anti-inflammatory effects in various animal models of pain and osteoarthritis. However, the molecular mechanism by which WIN-34B inhibits pain and inflammation in vivo remains to be elucidated. We investigated the molecular mechanisms of the actions of WIN-34B using various in vitro models using fibroblast-like synoviocytes from patients with rheumatoid arthritis (RA FLSs), RAW264.7 cells and peritoneal macrophages. WIN-34B inhibited the level of IL-6, $PGE_2$, and MMP-13 in IL-$1{\beta}$-stimulated RA FLSs in a dose-dependent manner. The mRNA levels were also inhibited by WIN-34B. The level of $PGE_2$, NO, IL-$1{\beta}$, and TNF-${\alpha}$ were inhibited by WIN-34B at different concentrations in LPS-stimulated RAW264.7 cells. The production of NO and $PGE_2$ was inhibited by WIN-34B in a dose-dependent manner in LPS-stimulated peritoneal macrophages. All of these effects were comparable to the positive control, celecoxib or indomethacin. I${\kappa}B$B signaling pathways were inhibited by WIN-34B, and the migration of NF-${\kappa}B$ into the nucleus was inhibited, which is consistent with the degradation of $I{\kappa}B-{\alpha}$. Taken together, the results suggest that WIN-34B has potential as a therapeutic drug to reduce pain and inflammation by inhibiting the production of pro-inflammatory mediators.

• Analytical Science and Technology
• /
• v.18 no.1
• /
• pp.27-34
• /
• 2005

$Li_2B_4O_7$ and $Na_2B_4O_7$ were synthesized with boron isotopic standard material for the measurement of boron isotopes of positive ions (PTIMS) such as $Li_2BO_2{^+}$ (mass 56, 57) and $Na_2BO_2{^+}$ (mass 88, 89) instead of boron mass 10 and 11. The negative ions (NTIMS) such as $^{10}BO_2{^-}$ and $^{11}BO_2{^-}$(mass 42와 43) were also measured with the same boron isotopic standard material. The precision and accuracy were compared between each method, and prescan of isobaric effect was studied. Good result was obtained from NTIMS method which provided the stable and enough peak intensities with good precision and accuracy. The measurement of boron isotopes were performed in ground water sample with about 8 ng-B ($5{\mu}L$ sample solution) obtained from IAEA for international inter-comparison analysis. The standard deviation was found to be 0.03%. Boron content of this ground water was measured using the NTIMS-IDMS. The result was $1.65{\pm}0.003ug-B/mL$ which was better precision compared to the ICP-AES result.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.10 s.352
• /
• pp.1-9
• /
• 2006

In this paper, a couple of 10Gb/s transimpedance amplifiers are realized in a 0.18um standard CMOS technology for optical communication applications. First, the voltage-mode inverter TIA(I-TIA) exploits inverter input configuration to achieve larger effective gm, thus reducing the input impedance and increasing the bandwidth. I-TIA demonstrates $56dB{\Omega}$ transimpedance gain, 14GHz bandwidth for 0.25pF photodiode capacitance, and -16.5dBm optical sensitivity for 0.5A/W responsivity, 9dB extinction ration and $10^{-12}$ BER. However, both its inherent parasitic capacitance and the package parasitics deteriorate the bandwidth significantly, thus mandating very judicious circuit design. Meanwhile, the current-mode RGC TIA incorporates the regulated cascade input configuration, and thus isolates the large input parasitic capacitance from the bandwidth determination more effectively than the voltage-mode TIA. Also, the parasitic components give much less impact on its bandwidth. RGC TIA provides $60dB{\Omega}$ transimpedance gain, 10GHz bandwidth for 0.25pF photodiode capacitance, and -15.7dBm optical sensitivity for 0.5A/W responsivity, 9dB extinction ration and $10^{-12}$ BER. Main drawback is the power dissipation which is 4.5 times larger than the I-TIA.

• Journal of radiological science and technology
• /
• v.40 no.4
• /
• pp.589-594
• /
• 2017

The objective of this study was to evaluate the enhancement effects of the quantum denoising system (QDS) on brain CT images. This retrospective study was conducted with 45 adults who visited G Radiology located in Gyungbuk for having brain CT tests between Jul 2017 and Oct 2017 after receiving consents. Subjects were divided into a control group (A group; no QDS(-) application during the brain CT test) and a treatment group (B Group; QDS(+) application during the brain CT test). The following conclusions were obtained from the study. The noise values at the Pons part and the Vermis part were significantly (p<0.05) lower in B Group ($Pons=5.41{\pm}1.05HU$; $Vermis=5.28{\pm}0.73HU$) than A Group ($Pons=6.92{\pm}0.98HU$; Vermis=6.72). The SNR values at the Pons part and the Vermis part were significantly (p<0.05) higher in B Group ($Pons=7.28{\pm}2.56$; $Vermis=8.63{\pm}3.04$) than A Group ($Pons=5.21{\pm}1.28$; $Vermis=6.23{\pm}1.49$). In conclusion, the results of this study suggested that the application of QDS to the brain CT test would enhance the signal to noise ratio (SNR) and the contrast to noise ratio (CNR) to provide an image more appropriate for diagnosis.

• Journal of Ginseng Research
• /
• v.26 no.2
• /
• pp.79-84
• /
• 2002

In this study, cell cracker method as a non-collision method was evaluated for the possibility in manufacturing red ginseng powder. In color value of red ginseng powder, the L values indicating brightness were 68.18 for hammer mill (group A) and 72.08 for cell cracker (group B). The a values (redness) and b values (yellowness) were 4.21 26.56 for group A and 5.73, 28.36 for group B, respectively. As an extraction time increased, the absorbances at 420 nm of water extract of both groups were increased. In the loose bulk density, tapped bulk density and volume reduction radio indication the of powder in group A were less than those in group B. In both groups, the angles of side of red ginseng powder were shown less value than the angles of side of the powder. These two angles in group A were lets than those in group B. In sensory evaluation, the touchness between both groups was, not observed significant difference. In the contrary, the color and flavor, main factors affecting the overall quality of red ginseng powder product of group B were shown superior to those of group A. The overall preference of group B was shown higher than that of group A.

• Korean Journal of Plant Resources
• /
• v.32 no.4
• /
• pp.318-324
• /
• 2019

Angelica gigas Nakai (AGN) is a perennial herb belonging to the family Apiaceae. Its root has been utilized as a traditional medicine in Korea. Also, it contains decursin (D) and decursinol angelate (DA) as major active components. This study was performed to compare the change in content of active components and antioxidant activity between bolting and non-bolting AGN. Bolting AGN (B1) and non-bolting AGN (NB1) were harvested in the end of August. Additional non-bolting AGN (NB2) was harvested in the end of October. The total weight of B1 was 728.7 g, which was 98.5% of NB2 weight. Next, the AGN root (B1, NB1 and NB2) was divided into main root and lateral root. And the AGN aerial part (B1, NB1) was divided into flower, leaf and stem. The two active components, D and DA, and antioxidant activity were analyzed. The D content of B1 was 0.35-1.33% according to the plant parts and the DA content was 0.29-1.07%. In addition, B1 flower and leaf showed higher antioxidant activity than NB2 roots. The results show that B1 contained 15-56% of total major components compared with NB2 main roots, suggesting that B1 could be used as a potential material.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.4
• /
• pp.559-563
• /
• 2000

A dextransucrase gene (dsrB742) that expresses a dextransucrase to synthesize mostly ${\alpha}-1{\rightarrow}6$ linked dextran with a low amount (3-5%) of ${\alpha}-1{\rightarrow}3$ branching was cloned and sequenced from Leuconostoc mesenteroides B-742CB. The 6.1-kb PstI fragments were ligated with pGEM-3Zf(-) and transformed into E. coli $DH5{\alpha}$. The recombinant clone (pDSRB742) synthesized dextran on an agar plate containing 2% (w/v) sucrose. The dextran synthesized was hydrolyzed with Penicillium endo-dextranase. The hydrolyzate was composed of glucose, isomaltose, isomaltotriose, and branced pentasaccharide. The nucleotide sequence of dsrB742 showed one open reading frame (ORF) composed of 4,524 bp encoding dextrasnsucrase. The deduced amino acid sequence revealed a calculated molecular mass of 168.6 kDa. It also showed an activity band of 184 kKa on a non-denaturing SDS-PAGE (10%). The amino acid sequence of DSRB742 exhibited a 50% similarity with DSRA from L. mesenteroides B-1299, a 70% similarity with DSRS from L. mesenteroides B-512 (F, FMCM) and a 45-56% similarity with Streptococcal GTFs.