• ETRI Journal
• /
• v.6 no.3
• /
• pp.17-20
• /
• 1984

A block replacement policy using items with different reliability is discussed. We devide system unit failure modes into two modes and use less reliable unit when operating unit fails near the planned preventive replacement time. In this policy, item A has two failure modes. Mode-1 failure is removed by minimal repair, mode-2 failure by replacement. If mode-2 failure of item A happens in (0,T- $\delta$). failure item A is replaced by new item A. If mode-2 failure of item A happens in(T-$\delta$,T), failure item A is replaced by new item B. Item B should be cheaper and less durable than item A. Under this policy, we determine the preventive replacement interval T and the interval $\delta$ of item B replacement which minimize the cost rate per unit time.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.3
• /
• pp.60-68
• /
• 1994

In this paper, the multiplicative algorithm of two polynomials over finite field GF(($p^{m}$) is presented. Using the presented algorithm, the multiple-valued multiplier of the serial input-output modular structure by CCD is constructed. This multiple-valued multiplier on CCD is consisted of three operation units: the multiplicative operation unit, the modular operation unit, and the primitive irreducible polynomial operation unit. The multiplicative operation unit and the primitive irreducible operation unit are composed of the overflow gate, the inhibit gate and mod(p) adder on CCD. The modular operation unit is constructed by two mod(p) adders which are composed of the addition gate, overflow gate and the inhibit gate on CCD. The multiple-valued multiplier on CCD presented here, is simple and regular for wire routing and possesses the property of modularity. Also. it is expansible for the multiplication of two elements on finite field increasing the degree mand suitable for VLSI implementation.

• International Journal of Contents
• /
• v.11 no.3
• /
• pp.63-68
• /
• 2015

A novel unit cell for a high pass filter was designed based on a composite right/left-handed structure that uses a folded coplanar waveguide. The equivalent circuit model for the unit cell was extracted from the geometry of the unit cell, and the effect of each main parameter of the unit cell was analyzed. The equations to calculate the immittance values of the equivalent circuit elements were formulated, and moreover, the dispersion characteristics and energy the distributions of the electromagnetic fields were simulated to determine the characteristics of the composite right/left-handed structure. Finally, the high pass filters were implemented as a series of the proposed unit cells. We show that the experimental results were in good agreement with those obtained from the simulation. Thus, the high pass filter was found to achieve a baseband insertion loss of 3 dB and a stopband attenuation of 70 dB.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.156-167
• /
• 2021

In this paper, we propose a digital transceiver unit design for in-building of 5G optical repeaters that extends the coverage of 5G mobile communication network services and connects to a stable wireless network in a building. The digital transceiver unit for driving the proposed 5G optical repeater is composed of 4 blocks: a signal processing unit, an RF transceiver unit, an optical input/output unit, and a clock generation unit. The signal processing unit plays an important role, such as a combination of a basic operation of the CPRI interface, a 4-channel antenna signal, and response to external control commands. It also transmits and receives high-quality IQ data through the JESD204B interface. CFR and DPD blocks operate to protect the power amplifier. The RF transmitter/receiver converts the RF signal received from the antenna to AD, is transmitted to the signal processing unit through the JESD204B interface, and DA converts the digital signal transmitted from the signal processing unit to the JESD204B interface and transmits the RF signal to the antenna. The optical input/output unit converts an electric signal into an optical signal and transmits it, and converts the optical signal into an electric signal and receives it. The clock generator suppresses jitter of the synchronous clock supplied from the CPRI interface of the optical input/output unit, and supplies a stable synchronous clock to the signal processing unit and the RF transceiver. Before CPRI connection, a local clock is supplied to operate in a CPRI connection ready state. XCZU9CG-2FFVC900I of Xilinx's MPSoC series was used to evaluate the accuracy of the digital transceiver unit for driving the 5G optical repeater proposed in this paper, and Vivado 2018.3 was used as the design tool. The 5G optical repeater digital transceiver unit proposed in this paper converts the 5G RF signal input to the ADC into digital and transmits it to the JIG through CPRI and outputs the downlink data signal received from the JIG through the CPRI to the DAC. And evaluated the performance. The experimental results showed that flatness, Return Loss, Channel Power, ACLR, EVM, Frequency Error, etc. exceeded the target set value.

• Communications of the Korean Mathematical Society
• /
• v.13 no.3
• /
• pp.561-577
• /
• 1998

We study (n＋3)-dimensional contact three CR submanifolds of a Riemannian manifold with Sasakian three structure and investigate some characterizations of $S^{4r＋3}$(a) $\times$ $S^{4s＋3}$(b) ($a^2$＋ $b^2$=1, 4(r ＋ s) = n - 3) as a contact three CR sub manifold of a (4m＋3)-dimensional unit sphere.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.3
• /
• pp.751-759
• /
• 2015

In this paper, we give new characterizations of the boundedness and compactness of composition operators $C_{\varphi}$ between Bloch type spaces in the unit ball $\mathbb{B}^n$, in terms of the power of the components of ${\varphi}$, where ${\varphi}$ is a holomorphic self-map of $\mathbb{B}^n$.

• Microbiology and Biotechnology Letters
• /
• v.23 no.5
• /
• pp.544-549
• /
• 1995

The alkaline elastase is an extracellular serine protease of the alkalophilic Bacillus strain Ya-B. To increase the gene copy number and the production level of the alkaline elastase Ya-B, we designed, on the B. subtilis chromosome, a gene amplification of the 10.6 kb repeating unit containing amyE, aleE (alkaline elastase Ya-B gene) and tmrB. The aleE was inserted between amyE and tmrB, and B. subtilis APT119 strain was transformed with this amyE-aleE-tmrB-junction region fragment. As a result, we succeeded in obtaining tunicamycin-resistant (Tm$^{r}$) transformants (Tf-1, Tf-2) in which the designed gene amplification of 10.6 kb occurred in chromosome. The transformants showed high productivity of $\alpha $-amylase and alkaline elastase Ya-B. The copy number of the repeating unit (amyE-aleE-tmrB) was estimated to be 25, but plasmid vector (pUC19) was not integrated. The amplified aleE of chromosome was more stable than that of plasmid in absence of antibiotics.

• Ocean and Polar Research
• /
• v.28 no.4
• /
• pp.475-484
• /
• 2006

In order to reveal the vertical variation of physical properties in deep-sea sediments, deep-sea sediment cores were collected at 78 stations using a multiple corer in the KR5 area, one of the Korea contract areas for manganese nodule exploration, located in the northeast equatorial Pacific. Based on the color of sediments, sampled sediment cores were characterized into three lithologic units (unit 1,2, and 3). In all sediment cores, three units appear systematically; unit 1 lies at the top of cores and unit 2 and/or unit 3 appear to underlie unit 1 or alternate with unit 3. Unit 1 layer from the top of cores shows dark grayish brown to dark brown with mean thickness of 10.2cm. Unit 2 and 3 layers show very dark brown to black color and yellowish brown to brown color, respectively. According to the physical properties of the deep-sea sediment cores, sediment column can be divided into three sections. Section A $(0{\sim}15cm)$ in subbottom depth consists mostly of unit 1. Mean values of physical properties of section B $(15{\sim}30cm)$ in subbottom depth are similar to those of section C (>30 cm) in subbottom depth. However, the physical properties of section B were more variable than those of section C because of the high activity of bioturbation in section B. These results will provide valuable information for selecting suitable sites for mining manganese nodules in the Korea contract areas.

• Bulletin of the Korean Mathematical Society
• /
• v.54 no.2
• /
• pp.705-714
• /
• 2017

Let $A^2_{{\alpha},{\beta}}(\mathbb{B}_n)$ denote the space of holomorphic functions that are $L^2$ with respect to a weight of form ${\omega}_{{\alpha},{\beta}}(z)=(1-{\mid}z{\mid}^{\alpha}e^{-{\frac{\beta}{1-{\mid}z{\mid}}}}$, where ${\alpha}{\in}\mathbb{R}$ and ${\beta}$ > 0 on the unit ball $\mathbb{B}_n$. We obtain some results for the boundedness and compactness of $Ces{\grave{a}}ro$ operator on $A^2_{{\alpha},{\beta}(\mathbb{B}_n)$.

• Korean Journal of Mathematics
• /
• v.28 no.4
• /
• pp.699-715
• /
• 2020

In this paper, we give estimates of the Hankel determinant H₂(1) in a novel class 𝓝 (𝜀) of analytical functions in the unit disc. In addition, the relation between the Fekete-Szegö function H₂(1) and the module of the angular derivative of the analytical function p(z) at a boundary point b of the unit disk will be given. In this association, the coefficients in the Hankel determinant b₂, b₃ and b₄ will be taken into consideration. Moreover, in a class of analytic functions on the unit disc, assuming the existence of angular limit on the boundary point, the estimations below of the modulus of angular derivative have been obtained.