• Journal of Korea Multimedia Society
• /
• v.13 no.2
• /
• pp.196-204
• /
• 2010

In this paper, we develope a defect inspection method for each buttons of keypad of cellular phones before they are assembled. The proposed algorithm consists of the similar color checking and its classification, font error detection, and scratch detection based on the segmentation of keypad area and font, translation and rotation processing sequentially. Especially, the proposed segmentation method approximate the pad region as B-spline function to deal with illumination change due to the shape of key button with the slant and curved surface followed by simple thresholding. And also, the rotational information is obtained by using eigen value and eigen vector very fast and effectively. The experimental results show that the performance of the proposed algorithm is good when it is applied to in-line process.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.2
• /
• pp.1-8
• /
• 2011

5-axis NC machining has a good advantage of the accessibility of tool motion by adding two rotary axes. It offers numerous advantages such as expanding machining fields in parts of turbo machineries like impeller, propeller, turbine blade and rotor, reasonable tool employment and great reduction of the set-up process. However, as adding two rotary axes, it is difficult to choose suitable machining conditions in terms of cutter path and cutter posture at a cutter contact point. Therefore in this paper, it is proposed to decide suitable machining condition through an experimental method such as adopting various cutter paths, cutter postures types. Also, in order to increase the efficiency of 5-axis machining, it is necessary to minimize the cutter posture changes and create a continuous cutter path while avoiding interference. This study, by using an MC-space algorithm for interference avoidance and an MB-spline algorithm for continuous control, is intended to create a 5-axis machining cutter path with excellent surface quality and economic feasibility. finally, this study will verify the effectiveness of the suggested method through verification processing.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.58-65
• /
• 1992

In this paper, wave resistance for a submerged body is calculated by a higher order panel method. The Neumann-Kelvin problem is solved by the source or normal dipole distribution method. The body surface is represented by a bicubic B-spline and the singularity strengths are approximated by a bilinear form. The results calculated by the higher order panel method are compared with those by the lowest order panel method developed by Hess & Smith. The convergence rate of the higher order panel method is much better than the lowest order panel method. But the wave resistance calculated by the higher order panel method still shows discrepancy with an analytic solution at low Froude number like that by the lowest order panel method.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.339-342
• /
• 2003

This paper newly proposes a mesh regularization method for the enhancement of the efficiency in sheet metal forming analysis. The regularization method searches for distorted elements with appropriate searching criteria and constructs patches including the elements to be modified. Each patch is then extended to a three-dimensional surface in order to obtain the information of the continuous coordinates. In constructing the surface enclosing each patch, NURBS(Non-Uniform Rational B-Spline) surface is employed to describe a three-dimensional free surface. On the basis of the constructed surface, each node is properly arranged to form unit elements as close as to a square. The analysis results with the proposed method are compared to the results from the direct forming analysis without mesh regularization in order to confirm the validity of the method.

• Transactions of Materials Processing
• /
• v.12 no.4
• /
• pp.401-407
• /
• 2003

This paper newly proposes a mesh regularization method for the enhancement of the efficiency in sheet metal forming analysis. The regularization method searches for distorted elements with appropriate searching criteria and constructs patches including the elements to be modified. Each patch is then extended to a three-dimensional surface in order to obtain the information of the continuous coordinates. In constructing the surface enclosing each patch, NURBS(Non-Uniform Rational B-Spline) surface is employed to describe a three-dimensional free surface. On the basis of the constructed surface, each node is properly arranged to form unit elements as close as to a square. The state variables calculated from its original mesh geometry are mapped into the new mesh geometry for the next stage or incremental step of a forming analysis. The analysis results with the proposed method are compared to the results from the direct forming analysis without mesh regularization in order to confirm the validity of the method.

• Korean Journal of Computational Design and Engineering
• /
• v.6 no.1
• /
• pp.40-47
• /
• 2001

In reverse engineering, existing products are digitized fur the computer modeling. Using the digitized data, surfaces are modeled for new products. However, in the digitizing process measuring errors or deviations can be happened often in practice. Thus, it is important to adjust such errors or deviations during the computer modeling. To adjust the errors, fairing of the modeled surfaces is performed. In this paper, we present a surface fairing algorithm based on various fairness metrics. Fairness metrics can be discrete. We adopt discrete metrics for fairing given 3D point set. The fairness metrics include discrete principal curvatures. In this paper, automatic fairing process is proposed for fairing given 3D point sets for surfaces. The process uses various fairness criteria so that it is adequate to adopt designers'intents.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2818-2820
• /
• 2001

This paper presents the method of 3D reconstruction of the depth information from the endoscopic stereo scopic images. After camera modeling to find camera parameters, we performed feature-point based stereo matching to find depth information. Acquired some depth information is finally 3D reconstructed using the NURBS(Non Uniform Rational B-Spline) algorithm. The final result image is helpful for the understanding of depth information visually.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.181.5-181
• /
• 2001

This paper presents the method of 3D reconstruction of the depth information from the endoscopic stereo scopic images. After camera modeling to find camera parameters, we performed feature-point based stereo matching to find depth information. Acquired some depth information is finally 3D reconstructed using the NURBS(Non Uniform Rational B-Spline) algorithm. The final result image is helpful for the understanding of depth information visually.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.567-572
• /
• 1988

As an efficient way of modeling bodies of complicated shapes, the sweeping and skinning operations have been implemented. These two operations are very powerful modeling method when the body is defined by the cross sections at various locations. For the implementation, the data structure for storing the cross sections and the resulting three dimensional body has been constructed. The resulting object is defined by the boundary representation based on the non-uniform nonperiodic B-spline surface.

• Architectural research
• /
• v.13 no.1
• /
• pp.17-24
• /
• 2011

Isogeometric solution of Poisson equation is provided. NURBS (NonUniform B-spline Surface) is introduced to express both geometry of structure and unknown field of governing equation. The terms of stiffness matrix and load vector are consistently derived with very accurate geometric definition. The validity of the isogeometric formulation is demonstrated by using two numerical examples such as square plate and L-shape plate. From numerical results, the present solutions have a good agreement with analytical and finite element (FE) solutions with the use of a few cells in isogeometric analysis.