• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.293-296
• /
• 2005

This paper presents the design of linear and circular polarization baseball- shaped circular microstrip antenna (BCMA) with 3-dimensional structure using perturbation effect to reduce its size, which runs at 1.575GHz frequency bandwidth. As a result, the size of linear polarized antenna could be reduced up to 23.7% in patch diameter and 41.8% in its area. Linear polarized antenna has -26.04dB of return loss, 69MHz(4.38%) of -l0dB bandwidth, 4.51dBd of gain, and its -3dB beamwidth are 99$^{\circ}$ in E-plane, 83$^{\circ}$ in H-plane. Circular polarized antenna has -17.43dB of return loss, 113.7MHz(7.2%) of -l0dB bandwidth, 2dBd of gain, 2dB of axial ratio and its -3dB beamwidth are 87$^{\circ}$, 86$^{\circ}$ x-axis polarized, 80$^{\circ}$, 84$^{\circ}$ y-axis polarized. It has 82mm of diameter, which is 28.5% of linear polarized CMPA. Therefore, in this paper we verified that baseball-shaped 3-dimensional structure of circular microstrip patch antenna applied with perturbation effect is appropriate for miniaturization.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.33 no.2
• /
• pp.137-143
• /
• 2011

Purpose: Orthognathic surgery is required in patients with severe skeletal disharmony and facial asymmetry, which results in functional and esthetic improvement. Recently, bimaxillary surgery has become generalized. Establishment of the occlusal plane among several other factors included in the surgery plan is a major consideration for the diagnosis and treatment plan and it is also an important factor for postoperative stability. Methods: In this study, we assessed postoperative stability of occlusal plane, B-point, and pogonion point on 20 patients who underwent two-jaw surgery in the Chosun Dental Hospital from 2000 to 2007. Preoperative and postoperative states and at least a one year postoperative follow-up were compared. Results: The postsurgical relapse volume of the occlusal plane to the SN plane and the FH plane was $-0.26{\pm}2.8^{\circ}$ and $-0.44{\pm}3.29^{\circ}$, respectively and after two-jaw surgery, the stability of occlusal plane was maintained. The horizontal relapse degree was $0.85{\pm}0.46$ mm and $0.76{\pm}0.48$ mm, respectively, and the vertical relapse degree was $1.16{\pm}0.36$ mm and $1.13{\pm}0.71$ mm of the B point and the Pogonion point at the time after minimal 1 year. Conclusion: The vertical relapse amount was shown to be slightly larger than the horizontal relapse amount.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.7
• /
• pp.786-795
• /
• 2010

In this paper, we propose a new EBG structure that the two unit cells are connected by the bridge line in signal transmission plane. The SSN of the power plane is reduced effectively by via holes and bridge lines connecting the unit cells. The superior signal transfer characteristic is shown between the signal lines in the signal transmission plane. The proposed EBG structure contains 1.2 GHz cut-off frequency and less than －30 dB suppression in the 8.3 GHz broad bandwidth. In addition, To improve the SI(Signal Integrity) in signal transmission plane keeping the same bandstop frequency range, the optimized location of the reference plane is proposed.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.1
• /
• pp.25-34
• /
• 1997

This study was made with lateral cephalometric radiography of 28 skeletal class III malocclusion patients that were performed to setback surgery of mandible. The 28 patients were selected by four standards as follows. 1) Set-back amount of mandible is below 10 mm 2) No extrusion and intrusion of posterior tooth or alteration of interincisial angle at period of postoperative orthodontic treatment. 3) Change of mesial segment location of mandible on lateral cephalometrics 4) No genioplasty And 28 patients were divided to three group(1,2,3 group) by degree of preoperative occlusal plane angle to Burstone's horizontal plane. The preoperative occlusal plane angle, which of 1 group was smaller than $7^{\circ}$ and 2 group was between $7^{\circ}$ to $15^{\circ}$ and 3 group was larger than $15^{\circ}$. The results were as follows : 1. As the preoperative occlusal plane angle was larger, the degree of mandibular prognathism was not severe. 2. On comparsion of preoperative and immediate postoperative cephalometric analysis, specific relationship of occlusal plane angle and set-back amount of mandible was not present. 3. As the preoperative occlusal plane angle was smaller, the alteration of postoperative occlusal plane angle was increased tendency. As the preoperative occlusal plane angle was larger, the alteration of postoperative occlusal plane angle was decreased tendency. 4. The relapsed degree of B point distance to Vertical plane was not relationship to the degree of preoperative occlusal plane angle.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.10
• /
• pp.1407-1413
• /
• 2005

An experiment was conducted in order to assess the effect of level of RDP:UDP ratio and level of feeding concentrate on milk yield, milk composition and nutrient utilization in lactating crossbred cattle. Twenty four medium producing (-10 kg/d, 45 to 135 days postpartum) lactating crossbred cows were divided into four groups of six animals each in a 2${\times}$2 factorial completely randomized design. The cows in group 1 were fed concentrate mixture I containing 59:41 RDP:UDP ratio (low UDP) at normal plane (LUDP+NP), in group 2 were fed low UDP ration at 115% of NRC (1989) requirements (LUDP+HP), whereas cows in group 3 were fed concentrate mixture II containing 52:48 RDP:UDP ratio (high UDP) at normal plane (HUDP+NP) and in group 4 were fed high UDP ration at 115% of NRC (1989) requirements (HUDP+HP). Green jowar was fed ad libitum as the sole roughage to all the animals. The experimental feeding trial lasted for 105 days. The total dry matter intake (DMI), DMI/100 kg body weight, DMI/kg $W^{0.75}$, digestibilities of DM, OM, CP, CF, EE and NFE and intakes of TDN and DCP did not differ significantly among the different groups and also due to both UDP level and plane of nutrition and also due to their interaction. The total dry matter intake varied from 145 g in group 1 (LUDP +NP) to 152.57 g/kg $W^{0.75}$ in group 2 (LUDP+HP) diet. However, increase in milk yield with increased UDP level and also with increased plane of nutrition was observed consistently throughout the experimental period. The average milk yield was 7.66, 8.15, 8.64 and 9.35 kg in groups 1, 2, 3 and 4, respectively and there was no significant difference in milk yield among different groups of cows. The overall daily average milk yields in cows fed with low and high UDP diets were 7.91 and 8.99 kg, respectively and at normal and higher plane of feeding the milk yields were 8.15 and 8.75 kg/day, respectively. Thus, there was 13.65% increase in milk yield due to high UDP level and 7.36% due to higher plane of feeding. The daily 4% FCM yields were 9.20 kg for low UDP diet and 10.28 kg for high UDP diet, whereas it was 9.11 kg at normal plane of feeding and 10.37 kg at higher plane of feeding. Fat yields for the corresponding treatment groups were 0.37, 0.43, 0.41 and 0.48 kg, respectively. The 4% FCM yield and also fat yield did not differ significantly among different dietary treatments and also due to UDP level and plane of nutrition, however, 4% FCM yield was increased by 11.74% with high UDP level and 13.83% with higher plane of feeding. The values for total solids, fat, lactose, solids-not-fat and gross energy contents in milk differed significantly (p<0.05) among the different groups and were significantly (p<0.05) higher in milk of cows fed LUDP+HP diet followed by HUDP+HP diet. Total solids (14.65 and 13.83%), lactose (5.44 and 4.92%), solids-not-fat (9.44 and 8.83%) and gross energy (887 and 838 kcal/kg) of milk decreased significantly (p<0.05) with increased UDP level while total solids (13.84 and 14.64), fat (4.84 and 5.36%) and gross energy (832 and 894 kcal/kg) increased significantly (p<0.05) with increase in plane of feeding. Gross and net energetic efficiencies and also gross and net efficiencies of nitrogen utilization for milk production were not significantly different among different groups and also were not affected significantly due to either UDP levels or plane of feeding. Results of the present study suggest that, increasing UDP level from 41% to 48% of CP in concentrate mixture and also increasing plane of feeding from normal (100%) to 115% of NRC requirements maintain a consistently higher milk production.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.425-431
• /
• 2001

In this paper, on aperture-coupled microstrip cylindrical dielectric resonant antenna(DRA) consisting of dielectric material with permittivity ${\epsilon}_{r}$ = 36 is designed and fabricated fir wireless LAN. First of all, the feedline length, width, slot length and width of the feeding element were calculated using the theory of microstrip transmission line. Radiation element is designed using the theory of cylindrical dielectric cavity, Resonant frequency of the fabricated cylindrical DRA is 2.449 GHz and VSWR, return loss and bandwidth is 1.009, -47 dB and 70 MHz, respectively. Front-to-back radiation ratio is about 12 dB and 3 dB beamwidth of E-plane and H-plane is 110$^{\circ}$ and 90$^{\circ}$ , respectively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.125-135
• /
• 2001

A 8$\times$4 microstrip antenna array is designed at 5.3 GHz and its characteristics are investigated with respect to the application in dual polarized synthetic aperture radars. The design is focused on the achievement of a wide bandwidth, a high polarization purity, a low loss, a good isolation and some mechanical requirements suitable for the application. The antenna is fed by a -3 dB tapered feed network, and is composed of dual polarized SSFIP (Strip-Slot-Foam-Inverted Patch) elements with honeycomb and shielding plane. Simulation results for the antenna array are presented and compared with measurements. It is observed that the antenna shows a bandwidth of 80 MHz, a polarization isolation better than 20 dB, an isolation of 40 dB, and good mechanical characteristics.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.101-108
• /
• 2006

This paper describes the design, fabrication, and measured results of a W-band Cassegrain antenna suitable for the target detecting fuze sensor. The Cassegrain antenna is designed using MATLAB and MWS of CST. We use the multi-mode horn antenna as a feeder. The measurement results are as follows: The gain is about 41dB; SLL is 17.7dB; 3dB beamwidth is about $1.51^{\circ}$ in E-plane and $1.45^{\circ}$ in H-plane. The magnitude of leakage signals is about 43.5mVpp when the fabricated antenna and the transceiver of the fuze sensor ire combined. As a result, the designed W-band Cassegrain antenna could be quite applicable to the target detecting fuze sensor.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.11
• /
• pp.895-900
• /
• 2005

We derive a linear matrix inequality(LMI) condition guaranteeing that any invariant zeros of a triple (A, B, C) lie in the open left half plane of the complex plane, i.e. $C(sI-A)^{-1}B$ is minimum phase. The LMI condition is equivalent to a certain constrained Lyapunov matrix equation which can be found in many results relating to stability analysis or control design. We show that the LMI condition can be used to simplify various control engineering problems such as a dynamic output feedback control problem, a variable structure static output feedback control problem, and a nonlinear system observer design problem. Finally, we give some numerical examples.

• Geotechnical Engineering
• /
• v.10 no.3
• /
• pp.111-118
• /
• 1994

A series of drained cubical triaxial tests was performed to investigate the finfluence of the intermediate principal stress on the deformation and strength characteristics of sand. Test results showed that the strength of sand as represented by the friction angle increased from triaxial compression condition (b:0) with increasing magnitude of the intermediate principal stress until the vus of b reached 0.75, land it decreased slightly with closing to b= 1. Also it was found that the projection of the plastic strain increment vector on the octahedral plane was perpendicular to the trace of the failure surface on that plane. The prediction by the isotropic single hardening model sllowed good coinidence with experimental results.