• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2007년도 추계학술대회 및 정기총회
• /
• pp.488-492
• /
• 2007

In this study, we investigated how to distinguish customer delivered value to re-purchasing in fierce B2C industry. To identify key managerial variables that could distinctively impact re-purchasing, we first identified customer value proposition as per the customer buying decision process. Next, core value propositions of choice efficiency and competitive price are defined to determine vendor satisfaction during the searching stage and purchasing stage. The trust level is also introduced in the sense of reflecting confirmation to guarantee after purchase security. Then, significant managerial variables to impact on core value propositions are extracted. The resulting structural model illustrated that search convenience and quality assurance affect the choice efficiency, and re-purchase intention is strongly explained by both the vendor satisfaction and trust level. The empirical testing results also support that transaction cost reduction is key determinant of shopping at the Internet shopping mall. Furthermore, trust level should be combined to induce re-purchasing in addition to transaction cost savings.

• Structural Engineering and Mechanics
• /
• 제68권1호
• /
• pp.95-101
• /
• 2018

The low rate of penetration and short lifetime of drilling bit served as the most common problems encountered in hard formation drilling, thus leading to severe restriction of drilling efficiency in oil and gas reservoir. This study developed a new local impact drilling method to enhance hard formation drilling efficiency. The limitation length formulas of radial/lateral cracks under static indentation and dynamic impact are derived based on the experimental research of Marshall D.B considering the mud column pressure and confining pressure. The local impact rock breaking simulation model is conducted to investigate its ROP raising effect. The results demonstrate that the length of radial/lateral cracks will increase as the decrease of mud pressure and confining pressure, and the local impact can result in a damage zone round the impact crater which helps the rock cutting, thus leading to the ROP increase. The numerical results also demonstrate the advantages of local impact method for raising ROP and the vibration reduction of bit in hard formation drilling. This study has shown that the local impact method can help raising the ROP and vibration reduction of bit, and it may be applied in drilling engineering.

• 한국수자원학회논문집
• /
• 제42권10호
• /
• pp.877-889
• /
• 2009

본 연구에서는 SWAT(Soil and Water Assessment Tool) 모형을 이용하여 미래 기후변화가 충주댐 유역(6,585.1 km$^2$)의 하천수질에 미치는 영향을 분석하고자 하였다. 미래 기상자료는 IPCC에서 제공하는 A2, A1B, B1 배출시나리오를 포함하는 ECHAM5-OM 모형의 결과를 과거 30년(1977-2006, baseline period) 기후자료를 바탕으로 편이보정(bias correction)과 Change Factor Method로 Downscaling 하였다. 6년(1998-2003) 동안의 일별 유출량 및 월별 수질(SS, T-N, T-P) 자료를 이용하여 모형의 보정 및 검증을 실시한 후, Downscaling된 ECHAM5-OM의 A2, A1B, B1 시나리오에 대해 2020s, 2050s, 2080s로 대별되는 미래의 수문학적 거동 변화 및 하천수질 변화를 전망하였다.

• 한국정보시스템학회지:정보시스템연구
• /
• 제32권4호
• /
• pp.149-162
• /
• 2023

Purpose In the textile industry, fabric defects significantly impact product quality and consumer satisfaction. This research seeks to enhance defect detection by developing a transformer-based deep learning image segmentation model for learning high-dimensional image features, overcoming the limitations of traditional image classification methods. Design/methodology/approach This study utilizes the ZJU-Leaper dataset to develop a model for detecting defects in fabrics. The ZJU-Leaper dataset includes defects such as presses, stains, warps, and scratches across various fabric patterns. The dataset was built using the defect labeling and image files from ZJU-Leaper, and experiments were conducted with deep learning image segmentation models including Deeplabv3, SegformerB0, SegformerB1, and Dinov2. Findings The experimental results of this study indicate that the SegformerB1 model achieved the highest performance with an mIOU of 83.61% and a Pixel F1 Score of 81.84%. The SegformerB1 model excelled in sensitivity for detecting fabric defect areas compared to other models. Detailed analysis of its inferences showed accurate predictions of diverse defects, such as stains and fine scratches, within intricated fabric designs.

• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.994-1001
• /
• 2012

승차감이나 안전에 관련된 부분 중 하나인 자동차 시트는 차량 주행시 전달되는 충격이나 진동을 적절하게 흡수하여 승객에게 안락성을 제공한다. 또한 이러한 여건을 만족시키면서 승객의 안전을 보장하는 충분한 강성과 강도를 가져야 한다. 자동차 시트는 2가지의 모델로 설계를 하고 구조 해석을 하였다. 그 결과, 시트 백 프레임의 모델(b)가 (a)보다 적은 변형량과 피로 수명을 보였고. 모델의 중앙에 해당되는 허리부분에서 가장 많은 변형량과 파손 가능성을 보였다. 고유진동수를 적용한 진동해석에서, 모델(a)의 경우는 모델의 바깥쪽에서 안쪽으로 변형이 되었고, 모델(b)의 경우는 모델의 안쪽에서 바깥쪽으로 변형이 되었다. 전반적으로 모든 면에서 모델(b)가 (a)보다 구조적으로 안전하다고 사료된다.

• 환경영향평가
• /
• 제15권2호
• /
• pp.93-100
• /
• 2006

In general, the verification to prediction formula in a national road and the main street of a town has been used recklessly in Korea. Therefore we investigated the validity of an existing prediction formula (NIER(87, 99), TR-Noise, KLC(2002)) with correction relationship which was based on both the prediction formular from apartment complex in the field and height 1.5m from the surface level. On the results of measuring the noise level form an isolated distance, the noise level showed that it was 4.5~5.5dB(A) by reason of becoming 2 folder far from a source. From the distribution of noise level measured by the apartment floors, the measurement point (1st floor) was 58.7~71.4dB(A) at its lowest level and the middle floors (3, 5, 7 and 10) were the highest distribution of noise level. From the analysis results on the application validity to an existing prediction formular (NIER(87, 99), TR-Noise, KLC(2002)) in the height 1.5m, the correction coefficients were 0.95~0.96 and the measured values were reasonably close to the predicted values, indicating the validity and adequacy of the predicted models. KLC(2002) model was found accurate within 3dB(A) with 36 data out of the total 42 data, showing the most accuracy among the predict models. However, the developed models have to improve the accuracy with a various of factors.

• 공업화학
• /
• 제22권6호
• /
• pp.711-717
• /
• 2011

전자충격반응을 고려한 three moment 플라즈마 모델과 전기적 중성성분의 반응을 고려한 유체 유동 모델을 결합하여 용량결합형 산소플라즈마에 대한 2차원적 전산모사 연구를 수행하였다. 전자의 에너지에 의하여 좌우되는 전자충격반응에 대한 반응속도는 전자와 $O_2$ 및 O 사이의 전자충돌단면적으로부터 계산되었다. 플라즈마 모델과 유체 유동 모델을 결합하고 상세한 반응메커니즘을 포함시킴으로써 전하를 띠는 전자와 이온($O_2{^+}$, $O^+$, $O_2{^-}$, and $O^-$) 그리고 기저상태의 산소($O_2$ and O)뿐만 아니라 $O_2(a^1{\Delta}_g)$, $O_2(b^1{{\Sigma}_g}^+)$, $O(^1D)$, $O(^1S)$ 등과 같이 산소플라즈마 특성에 중요한 역할을 하는 준안정상태 성분들의 시공간적 분포를 예측할 수 있었다. 또한 산소플라즈마의 전산모사로부터 sheath 경계에 이중층이 존재함을 확인할 수 있었다.

• 대한기계학회논문집B
• /
• 제26권11호
• /
• pp.1597-1604
• /
• 2002

In this study, numerical investigation has been performed on the impingement, spreading and solidification of a coating material droplet impacting onto a solid substrate in the thermal spray process. The numerical model is validated through the comparison of the present numerical result with experimental data fer the flat substrate without surface defects. An analysis of deposition formation on the non-polished substrate with surface defects is also performed. The parametric study is conducted with various surface defect sizes and shapes to examine the effect of surface defects on the impact and solidification of the liquid droplet on the substrate.

• Structural Engineering and Mechanics
• /
• 제85권1호
• /
• pp.119-133
• /
• 2023

Impact event is the key factor influencing the operational state of the mechanical equipment. Additionally, nonlinear factors existing in the complex mechanical equipment which are currently attracting more and more attention. Therefore, this paper proposes a novel hybrid-separate identification strategy to solve the force identification problem of the nonlinear structure under impact excitation. The 'hybrid' means that the identification strategy contains both l1-norm (sparse) and l2-norm regularization methods. The 'separate' means that the nonlinear response part only generated by nonlinear force needs to be separated from measured response. First, the state-of-the-art two-step iterative shrinkage/thresholding (TwIST) algorithm and sparse representation with the cubic B-spline function are developed to solve established normalized sparse regularization model to identify the accurate impact force and accurate peak value of the nonlinear force. Then, the identified impact force is substituted into the nonlinear response separation equation to obtain the nonlinear response part. Finally, a reduced transfer equation is established and solved by the classical Tikhonove regularization method to obtain the wave profile (variation trend) of the nonlinear force. Numerical and experimental identification results demonstrate that the novel hybrid-separate strategy can accurately and efficiently obtain the nonlinear force and impact force for the nonlinear structure.

• 대한기계학회논문집B
• /
• 제28권7호
• /
• pp.763-770
• /
• 2004

The problem of edge overcoating developed near the edge of the steel strip is studied quantitatively in the gas wiping process of continuous hot-dip galvanizing. It has been assumed that the edge overcoating occurs due to the reduced impact pressure of wiping gas on the strip edge and it is one of detrimental problems to the quality of coating products. In order to analyse the edge overcoating problem numerically, three-dimensional unsteady flows due to the gas wiping are calculated by using a commercial code, STAR-CD. Standard $\kappa$-$\varepsilon$ model is used as a turbulence model. The 1D code for calculation of coating thickness is constructed by using continuity and Navier-Stokes equations. The calculation results have shown good agreement with measurements of edge overcoating thickness, taken from galvanizing line trials. Therefore it is conformed that the major cause of edge overcoating is the reduced impact pressure of wiping gas on the strip surface.