• 방송공학회논문지
• /
• 제16권3호
• /
• pp.416-426
• /
• 2011

본 논문은 H.264/AVC의 인트라(Intra) 부호화에서 인트라 예측 모드를 병합하여 부호화 성능을 높일 수 있는 기술에 관한 것이다. 제안하는 기술은 기존의 인트라 부호화에서 예측 모드를 시그널링(Signaling) 하는 방법과 다르게 여러 블록의 예측 모드를 병합하는 방법을 사용하여 예측 모드를 시그널링 한다. 기설정한 경계값 이상의 블록이 주변 블록으로부터 예측된 모드와 같을 경우에는 제안된 방법을, 그렇지 않을 경우에는 기존의 방법을 사용하여 시그널링 하여 인트라 예측 모드 비트량을 줄임으로써 부호화 효율을 높이는 방법을 제안하였다. 실험 결과, 제안한 방법은 기존의 방법과 비교하여 약 0.05dB의 PSNR(Peak signal to-noise ratio) 증가, 약 1%의 비트율이 감소하였다. 특히 low bit-rate일 경우, 약 0.1dB의 PSNR 증가, 약 1.7%의 비트율이 감소시킴으로써 low bit-rate에서 효과적임을 알 수 있다.

• 대한수학회지
• /
• 제52권5호
• /
• pp.991-1001
• /
• 2015

In this work we obtain conditions for nonspecial line bundles on general ${\kappa}$-gonal curves failing to be normally generated. Let L be a nonspecial very ample line bundle on a general ${\kappa}$-gonal curve X with ${\kappa}{\geq}4$ and $deg\mathcal{L}{\geq}{\frac{3}{2}}g+{\frac{g-2}{{\kappa}}}+1$. If L fails to be normally generated, then L is isomorphic to $\mathcal{K}_X-(ng^1_{\kappa}+B)+R$ for some $n{\geq}1$, B and R satisfying (1) $h^0(R)=h^0(B)=1$, (2) $n+3{\leq}degR{\leq}2n+2$, (3) $deg(R{\cap}F){\leq}1$ for any $F{\in}g^1_k $. Its converse also holds under some additional restrictions. As a corollary, a very ample line bundle $\mathcal{L}{\simeq}\mathcal{K}_X-g^0_d+{\xi}^0_e$ is normally generated if $g^0_d{\in}X^{(d)}$ and ${\xi}^0_e{\in}X^{(e)}$ satisfy $d{\leq}{\frac{g}{2}}-{\frac{g-2}{\kappa}}-3$, supp$(g^0_d{\cap}{\xi}^0_e)={\phi}$ and deg$(g^0_d{\cap}F){\leq}{\kappa}-2$ for any $F{\in}g^1_k$.

• 한국전자파학회논문지
• /
• 제18권8호
• /
• pp.866-872
• /
• 2007

본 논문에서는 Peano curve의 가장자리에 인덕터를 집적한 주파수 가변 소형 metamaterial 안테나를 제안하였다. 제안된 안테나는 1차 Peano curve 평면과 그라운드 평면으로 구성되며, 이 두 평면은 두 개의 단락 post로 연결되어 있다. 이 단락 post와 Peano curve 사이에는 인덕터가 부착되어 있다. 두 인덕터의 inductance를 적절히 선택하여 입력 임피던스 대역폭의 감소 없이 안테나의 동작 주파수를 조절할 수 있다. 안테나의 동작 원리를 설명하기 위해 안테나의 등가 회로를 제시했다. 시뮬레이션 결과를 검증하기 위해 몇 가지 다른 인덕터가 부착된 안테나를 제작했으며, 측정 결과는 시뮬레이션 결과와 매우 잘 일치한다. 인턱터 값 조합에 따라 입력 임피던스의 감소 없이 동작 주파수가 1.47 GHz에서 0.586 GHz로 변함이 측정되었다. 91 nH와 470 nH의 두 인덕터를 집적한 경우, 안테나의 전기적 크기는 $0.0246 {\lambda}{\times}0.0246{\lambda}{\times}0.0114{\lambda}$로 매우 소형이다. 이 때 측정된 입력 임피던스 대역폭$(S_{11}{\leq}-10 dB)$과 방사 효율은 각각 5.22 %와 47.25 %이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.772-777
• /
• 2000

Cam mechanisms are used commonly in many automatic machinery. Disk cam mechanisms has 4 different types according to the different types of followers. The motion characteristics of the cam mechanisms depend on the shape of the cam and the type of the follower. This paper performs the motion analysis for a disk cam and follower mechanism using a circular arc method and a coordinate transformation method in order to find a contact point of the cam and follower. The velocity is calculated by using the instant velocity concept. Also, the acceleration is determined on using the central difference method. As the results, this paper presents the original curve and the analyzed curve for the motion analysis of the disk cam for an example.

• 한국정밀공학회지
• /
• 제20권4호
• /
• pp.158-164
• /
• 2003

The air circuit breaker (ACB) with the spring-actuated mechanism was studied to improve the fatigue-proof characteristics of its link. The low-cycle fatigue fracture phenomenon occurred on the critical link, called h-link, of ACB from the repeated rapid closing and opening operations. To analyze the cause of failure, dynamic FE-analysis on the b-link part of ACB was performed considering tile velocity and acceleration of the links per time as boundary conditions, which were obtained by using ADAMS. Also, the S-N curve obtained by experiments was used to investigate requirement on the fatigue-proof characteristics. Then, to reduce the maximum tensile stress on the h-link, three types of h-link were examined and one of them was selected.

• 산업기술연구
• /
• 제25권B호
• /
• pp.149-157
• /
• 2005

The power performance monitoring system for a small class of wind turbine is established. The wind turbine power performance characteristics are determined by measured power curve and the estimated annual energy production (AEP). The measured power curve is determined by collecting simultaneous measurements of wind speed and power output at the test site under varying wind conditions. In order to determine the power performance characteristics of the wind turbine accurately, the data are of sufficient quantity and quality shall be corrected according to defined criteria. In this study, the 6kW wind turbine made by Germany Inventus GmbH is examined.

• 한국분무공학회지
• /
• 제4권1호
• /
• pp.55-61
• /
• 1999

The first maximum point in the stability curve of liquid jet, i.e., the critical point is associated with the critical Reynolds number. This critical Reynolds number should be predicted by simple means. In this work, the critical Reynolds number in the stability curve of liquid jet are predicted using the empirical correlations and the experimental data reported in the literatures. The critical Reynolds number was found to be a function of the Ohnesorge number, nozzle lengh-to-diameter ratio, ambient Weber number and nozzle inlet type. An empirical correlation for the critical Reynolds number as a function of the Ohnesorge number and nozzle length-to-diameter ratio is newly proposed here. Although an empirical correlation proposed in this work may not be universal because of excluding the effects of ambient pressure and nozzle inlet type, it has reasonably agrees with the measured critical Reynolds number.

• 한국자기학회지
• /
• 제23권5호
• /
• pp.154-158
• /
• 2013

자성-금속-자성 삼층구조로 반강자성 결합 특성을 갖는 박막 재료의 자화 곡선은 두 자성박막 각각의 자화량($M_1$, $M_2$) 변화 특성을 반영한다. 본 연구에서는 반강자성 결합 특성을 갖는 CoB/Ru/CoB 박막 재료의 두 자성 박막의 총자화량($M_{tot}=M_1+M_2$)과 상부 단일 박막의 자화량($M_1$)의 이론적 값을 Stoner-Wohlfarth 모델로 계산하였다. VSM으로 측정한 총자화량은 자기장의 반전에 따라 가역 특성을 보였으며, CoB/Ru/CoB 재료의 플롭자기장($H_F$)은 약 50 Oe였다. 한편 MOKE로 측정한 상부 단일 박막의 자화량($M_1$)은 $-H_F$ < H < $H_F$에서 비가역 자화 반전 특성을 보였다. 이러한 자화 거동 특성은 두 자성 박막에 서로 상호 작용하는 반강자성 결합에 의하여 두 자성 박막 각각의 자화 각도 변화에 기인함을 Stoner-Wohlfarth 모델 계산을 통하여 확인하였다.

• 대한약리학회지
• /
• 제8권2호
• /
• pp.55-61
• /
• 1972

Superprecipitation of actomyosin has been considered to be an in vitro model of the muscle contraction. The superprecipitation and ATPase activity (which supplies the energy for contraction) are influenced by several factors which are the large amount of changes in ionic strength, Mg and ATP concentrations. But those behaviors are found to be promptly influenced by the change in a small range of calcium concentration which can be controlled by the cellular function of muscle physiologically only in the presence of the modullatory proteins, tropomyosin and troponin. In order to elucidate the precise roles of calcium in the muscle contraction and relaxation, the effects of calcium on the actin- myosin interaction was observed in the presence of tropomyosin and troponin using the superprecipitation system. The results are summarized as follows: 1. EGTA (glycol ether diaminetetraacetic acid)prolonged the initiation of the superprecipitation of natural actomyosin. 2. Superprecipitation curve was declined by adding EGTA at the time when tile curve reached the half- maximum. The degree of declining was proportional to the amount of EGTA added. Especially, upon adding 0.25 mM EGTA the curve was lowered to the level before the protein superprecipitated. But addition of EGTA did not affect the curve after attaining the maximum. 3. Superprecipitation of Perry myosin B was not affected by EGTA added both before and during the course of the reaction. 4. Tropomyosin did not change the response of Perry myosin B to EGTA added at any time of the reaction. 5. Troponin also did not change the response of Perry myosin B to EGTA. 6. Both tropomyosin and troponin together rendered the Perry myosin B to obtain the same response as natural actomyosin to EGTA. 7. It was concluded that actin-myosin interaction was influenced by the minute change of calcium concentration only in the presence of both tropomyosin and troponin. We could reproduce the contraction and relaxation of the muscle in vitro under the presence of ATP by changing the calcium concentration.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권5호
• /
• pp.250-257
• /
• 2006

It is well known that Grain-oriented electrical steel sheets have two dimensional magnetic properties according to the direction of exciting field such as non-linear phase difference between magnetic flux density and magnetic field intensity vectors, different iron loss and permeability even when an alternating magnetic field is applied. The measurement and application of the two dimensional magnetic properties of the Grain-oriented electrical steel sheets, therefore, are very important for the design and precise performance analysis of electric machines made of them. As the direction of exciting field changes, in this paper, the two dimensional magnetic properties of a Grain-oriented electrical steel sheet, i.e., non-linear B-H curves, phase difference between B and H, and iron loss characteristics, are measured using SST(Single Sheet Tester) which has two axes excitation. The measured results are presented in two ways: using $(B,\theta_B)$ method and using hysteresis loops along rolling and transverse directions, respectively.