• Journal of Integrative Natural Science
• /
• v.6 no.1
• /
• pp.46-52
• /
• 2013

In this thesis, we consider isoparametric curves of quadratic F-B$\acute{e}$zier curves. F-B$\acute{e}$zier curves unify C-B$\acute{e}$zier curves whose basis is {sint, cos t, t, 1} and H-B$\acute{e}$zier curves whose basis is {sinht, cosh t, t,1}. Thus F-B$\acute{e}$zier curves are more useful in Geometric Modeling or CAGD(Computer Aided Geometric Design). We derive the relation between the quadratic F-B$\acute{e}$zier curves and the quadratic rational B$\acute{e}$zier curves. We also obtain the geometric properties of isoparametric curve of the quadratic F-B$\acute{e}$zier curves at both end points and prove the continuity of the isoparametric curve.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.3
• /
• pp.417-421
• /
• 2015

In this paper, study for B-H curve characteristics of the magnetic material due to tensile stresses of submarine for magnetic silence. For the experiment, made the sample of the material of AH36 and made to a B-H curve Tracer. In addition, design and made a system of stress by the weight in order to apply a tensile stress, it was possible to obtain results for the change of the magnetization.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.1
• /
• pp.1-10
• /
• 2006

This paper addresses B-spline curve approximation of a set of ordered points to a specified toterance. The important issue in this problem is to reduce the number of control points while keeping the desired accuracy in the resulting B-spline curve. In this paper we propose a new method for error-bounded B-spline curve approximation based on adaptive selection of dominant points. The method first selects from the given points initial dominant points that govern the overall shape of the point set. It then computes a knot vector using the dominant points and performs B-spline curve fitting to all the given points. If the fitted B-spline curve cannot approximate the points within the tolerance, the method selects more points as dominant points and repeats the curve fitting process. The knots are determined in each step by averaging the parameters of the dominant points. The resulting curve is a piecewise B-spline curve of order (degree+1) p with $C^{(p-2)}$ continuity at each knot. The shape index of a point set is introduced to facilitate the dominant point selection during the iterative curve fitting process. Compared with previous methods for error-bounded B-spline curve approximation, the proposed method requires much less control points to approximate the given point set with the desired shape fidelity. Some experimental results demonstrate its usefulness and quality.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.61-63
• /
• 1998

A B-H curve measuring system for testing softmagnetic materials was constructed. This system can measure the B-H curve in the low frequency(0.1 - 1 Hz) range. The drift of the integrator can be moderately removed by software technique. The advantages of the developed system are easier to measure B-H curve compared with conventional measuring system and low cost.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.4
• /
• pp.246-255
• /
• 2006

Ribs and fans are interesting geometric entities that are derived from an ordinary $B\'{e}zier$ curve or surface. A rib itself is a $B\'{e}zier$ curve or surface with a lower degree than the given curve or surface. A fan is a vector field whose degree is also lower than its origin. First, we present methods to transform the control points of a $B\'{e}zier$ curve or surface into the control points and vectors of its ribs and fans. Then, we show that a $B\'{e}zier$ curve of degree n is decomposed into a rib of degree (n-1), a fan of degree (n-2), and a scalar function of degree 2. We also show that a $B\'{e}zier$ surface of degree (m, n) is decomposed into a rib of degree (m-1, n-1) and three fans of degrees (m-1, n-2), (m-2, n-1), and (m-2, n-2), respectively. In addition, the lengths of the fans are further controlled by scalar functions of degree 2 and (2, 2). We present relevant notations and definitions, introduce theories, and present some of design examples.

• Journal of Magnetics
• /
• v.20 no.3
• /
• pp.258-264
• /
• 2015

In this paper, an adequate B-H curve extrapolation method is proposed and its reliability is verified through experiments. A method is developed to estimate the magnetic saturation induction from the density of the lamination core and electrical resistivity. The magnetic saturation induction of electrical steels measured using a vibration sample magnetometer are compared with the analytical results to validate the accuracy of the proposed estimation method. It is found that the predicted error in the magnetic saturation induction of the electrical steels are approximately 1.2% when the proposed method is used. The performance of interior permanent magnet synchronous motors that applies the proposed method are evaluated via 2D nonlinear finite element analysis and through experiments. Based on the obtained results, the extrapolated B-H curves from the estimated saturation induction can be used for various analyses in saturation region.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.4
• /
• pp.737-740
• /
• 1992

This study was conducted to demonstrate the practical use of the buffer index curve as a criterion of silage quality evaluation, Forty five samples of the ensiled Italian ryegrass were collected from farms in Okayama, Japan. Silages were devided into 4 groups by the pattern of buffer index curve. Heavy wilting silages (A group) showed no peak on buffer index curve and Flieg's score of 95.6. However, moderate or weak wilting silages (B group) with moisture content of 63.3 showed a peak at pH 4.0 and a Flieg's score of 67.8. Both of A and B groups were regarded as a good quality silage. Silages (C group) with a peak at pH 4.5 were of a medium quality with Flieg's score of 45.3. Poorly preserved silages (D group) with Flieg's score of 12.0 had a peak at pH 5.0. There was a high positive correlationship (p<0.01) between the peak value of buffer index curve and the organic acid content.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.711-712
• /
• 2015

잠수함은 운행 중 수압에 따라 자화 특성이 변하므로 자기정숙화에 어려움이 있다. 본 논문은 잠수함 운행 중 수압에 따른 압력선체의 B-H Curve 특성 변화를 측정하였다. 잠수함의 압력선체는 강자성체 재질로 모델링 하여 제작하고 비자성체인 스테인리스로 보빈을 만들어 나사를 조이는 형태로 압축응력을 모사했다. 그 결과 응력이 가해지면 투자율이 작아지고 최대 자속밀도 또한 감소하였다.

• Journal of Korea Water Resources Association
• /
• v.39 no.6 s.167
• /
• pp.487-494
• /
• 2006

The flood discharge on the rising limb of a hydrograph at Hwawon station greatly differs from the flood discharge on the falling limb for the same stage. When there is such a big hysteresis, there can be a significant amount of errors in the rated discharge obtained from a simple rating curve. To reduce errors in rated discharges, a looped rating curve was established for Hwawon station in the Nakdong River. In order to compute the deviation between real discharges and simply rated discharges, a simple rating curve was established using the stage and discharge data from the results of a hydraulic channel routing. The relationship between the discharge deviation ${\Delta}Q$ and a product of B and ${\Delta}h/{\Delta}t$ was analysed, where B is the channel topwidth; ${\Delta}h$ is the stage increment; At is the time increment. Strong relation between ${\Delta}Q$ and $B{\Delta}h/{\Delta}t$ was found. The discharges calculated from the relationship show differences by 10 % or less for the 7 observations out of 11 observations in 1997 whose stages exceeds 7 m. The observed discharges for the stages over 9 m in 1998 also show small difference with the discharges estimated from the loop rating curve. Looped rating curve is recommended, instead of the simple rating curve to reduce the errors of rated discharges for gauging stations like Hwawon, which has relatively large loop width.

• Journal of the Korean Chemical Society
• /
• v.51 no.1
• /
• pp.21-30
• /
• 2007

A multiwavelength spectrophotometric titration method was applied to study protolytic constants of four water-soluble vitamins, folic acid(vitamin B9 or B0), thiamine(vitamin B1), riboflavin(vitamin B2) and pyridoxal (vitamin B6) in binary ethanol-water mixtures at 25oC and an ionic strength of 0.1M NaNO3. The protolytic equilibrium constants, spectral profiles, concentration diagrams and also the number of components has been calculated from the curve fitting of the pH-absorbance data with appropriate mass balance equations by an established factor analysis model. DATAN program was used for determination of acidity constant and SPECFIT program was used for calculation of standard deviations and partial correlation coefficients. A glass electrode calibration procedure based on the four parameter equation pH=α+SpcH+JH+[H+]+ JOH-Kw/[H+] based on the Gran,s plots was used to obtain pH-readings in the concentration scale (pcH). The effect of the solvent on the protolytic constants was discussed.