• Title/Summary/Keyword: B-H 선도

Search Result 647, Processing Time 0.032 seconds

Ground-based and On-satellite Observations of Be and B Stars (인공위성관측과 지상관측에 의한 Be성과 B성의 연구)

  • 정장해
    • Journal of Astronomy and Space Sciences
    • /
    • v.5 no.1
    • /
    • pp.9-18
    • /
    • 1988
  • Gamma Cassiopeae has been observe at Yonsei University Observatory(YUO) for 31 nights in the period 1983-1987 and a total of 312 UBV observations(104 in each colour) was secured. Light curves of ${\gamma}$ Cas in V, B-V, and U-B have been constructed with the YUO data; among them we present selected light curves of 5 different long nights. Discussed are the general photometric behaviour of ${\gamma}$ Cas, especially in connection with B-V changes, V/R variations of $H\alpha$ and H$\beta$, and high velocity narrow component(hvnc) exhibited in the far UV. Six spectral image sets of $\varepsilon$Per archived on IUE satellite are reduced and their line profiles in C IV and Si IV resonance lines are analyzed to find out any change, but the evidence is unlikely.

  • PDF

Cancer Treatment Equipment Development Using laser-Driven Ion Acceleration Technology (레이저 이온 가속 기술을 이용한 암 치료 기기 개발)

  • Jung, M.Y.;Joe, W.B.;Park, J.W.;Hwang, H.W.;Yang, S.K.;Song, D.H.;Park, H.J.;Shin, D.H.;Pyo, H.B.;Park, S.J.;Park, S.H.
    • Electronics and Telecommunications Trends
    • /
    • v.28 no.4
    • /
    • pp.23-34
    • /
    • 2013
  • X-선 혹은 감마선 등 종래의 방서선 치료는 양성자 혹은 이온에 의한 치료방법의 등장함에 따라 퇴조할 것으로 보인다. 그 이유는, 양성자 등 전하를 띄는 입자치료기술이 치료 후 후유증이나 암의 재발을 현저히 억제시킬 수 있기 때문이다. 전하를 띄는 입자는 암 조직 전후의 정상 조직에 최소한의 피폭을 주나, X-선이나 감마선과 같은 광자들은 암 조직 전후의 정상세포가 암세포로 변화될 수 있는 정도의 피폭량을 주는 것으로 알려져 있다. 현재 임상 중인 양성자(혹은 극히 일부의 탄소이온 치료기)치료기는 1990년 미국의 로마린다(Loma Linda) 대학에서 최초로 건립된 방식인 사이클로트론 혹은 싱클로트론 가속기와 빔라인 및 겐트리(gantry)로 구성된다. 그 장치의 거대함만큼이나 가격과 유지비 등에서 일반 소형병원에서 운영하기에는 쉽지 않아 보인다. 이에 본고에서는 소형병원에서도 운영할 수 있는 저비용의 레이저 양성자(이온) 가속방식의 등장 배경과 향후 전망을 논하고자 한다.

  • PDF

A Study on Mossbauer Spectra of the ${Ni_{1+x}}{Ti_x}{Fe_{2-2x}}O_4$ System (${Ni_{1+x}}{Ti_x}{Fe_{2-2x}}O_4$계의 $\M"{o}ssbauer$ 스펙트럼 연구)

  • Baek, Seung-Do;Ko, Jeong-Dae;Hong, Sung-Rak
    • Korean Journal of Materials Research
    • /
    • v.11 no.1
    • /
    • pp.3-7
    • /
    • 2001
  • $M\"{o}ssbauer$ spectra of the $Ni_{1+x}Ti_xFe_{2-2x}O_4$ systems ($0{\leqq}x{\leqq}0.7$), which appear as single phase spinel structure, were examined at RT. The $M\"{o}ssbauer$ spectra reveal two sextet for $0{\leqq}x{\leqq}0.3$, two sextet and a doublet for $0.4{\leqq}x{\leqq}0.6$, and a doublet for x=0.7 As x increases, the area ratio of B-site and A-site($A_B/A_A$) of the sextet decreases, and the area ratio of the doublet and the total areas($A_{doublet}/A_{tot.}$) increases. The isomer shift(I.S.) of A-site slightly increases and magnetic hyperfine fields($H_{hf}$) of two sites decrease as the increasing x. From these results, we have obtained the cation distributions of the samples and concluded that the increasing x leads to the decrease of covalency of $Fe^{3+}-O^{2-}$ bond in A-sites and A-B superexchange interactions.eractions.

  • PDF

암흑성운 Baenars 5의 H$_2$CO 2mm 와 6cm의 관측

  • 이용복
    • Bulletin of the Korean Space Science Society
    • /
    • 1993.04a
    • /
    • pp.12-12
    • /
    • 1993
  • 암혹성운 B5 영역의 중심 부분을 분자흡수선 BSCO의 6cm와 방출선인 2mmE 관측하였다. 관측은 독일의 Bonn에 있는 전파망원경과 미국의 Arizona주의 Kit Peak에 있는 전파망원정을 사용하였다. 본 관측 결과에서 얻어진 antenna temperature (Ta)의 분포를 mappin 하였다. 이 두 종류의 판측을 상호 비교한 결과 최대 황도의 위치가 서로일치하지 않음을 확인하였다. 6cm의 관측결과는 star count 방법에 의하여 결정된 extionction map에 나타나는 중심지역과 거의 일치하나, 2mm 관측은 B5 내에 있는 적외선광인 IRS 1의 위치와 일치하였다. 본 연구에서는 다른 분자선 관측 결과와 비교하므로써 H2CO의 관측 결과를 분석하였다.

  • PDF

Coplanar Waveguides Fabricated on Oxidized Porous Silicon Air-Bridge for MMIC Application (다공질 실리콘 산화막 Air-Bridge 기판 위에 제작된 MMIC용 공면 전송선)

  • 박정용;이종현
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.40 no.5
    • /
    • pp.285-289
    • /
    • 2003
  • This paper proposes a 10 ${\mu}{\textrm}{m}$ thick oxide air-bridge structure which can be used as a substrate for RF circuits. The structure was fabricated by anodic reaction, complex oxidation and rnicrornachining technology using TMAH etching. High quality films were obtained by combining low temperature thermal oxidation (50$0^{\circ}C$, 1 hr at $H_2O$/O$_2$) and rapid thermal oxidation (RTO) process (105$0^{\circ}C$, 2 min). This structure is mechanically stable because of thick oxide layer up to 10 ${\mu}{\textrm}{m}$ and is expected to solve the problem of high dielectric loss of silicon substrate in RF region. The properties of the transmission line formed on the oxidized porous silicon (OPS) air-bridge were investigated and compared with those of the transmission line formed on the OPS layers. The insertion loss of coplanar waveguide (CPW) on OPS air-bridge was (about 1 dB) lower than that of CPW on OPS layers. Also, the return loss of CPW on OPS air-bridge was less than about - 20 dB at measured frequency region for 2.2 mm. Therefore, this technology is very promising for extending the use of CMOS circuitry to higher RF frequencies.

Fabrication of Microlenses by X-ray Lithography (X-선 사진식각공정을 이용한 마이크로렌즈의 제작)

  • Jung, S.W.;Park, K.B.;Kim, K.N.;Lee, B.N.;Kim, I.H.;Moon, H.C.;Park, H.D.;Hong, S.J.;Park, S.S.;Shin, S.M.
    • Proceedings of the KIEE Conference
    • /
    • 1999.11d
    • /
    • pp.1164-1166
    • /
    • 1999
  • 본 연구에서는 3차원 회전체 구조물을 제조하기 위해 회전노광장치를 설계하여 제작하고 마이크로렌즈 제작용 X-선 마스크와 PMMA 기판을 정밀하게 회전시켜 노광함으로써 3차원의 마이크로렌즈를 제작하였다. 제작된 마이크로렌즈의 크기는 직경이 $50{\sim}700{\mu}m$이었고, 또한 이러한 방법으로 원통형 렌즈, 계란형 렌즈 등을 제작함으로써 X-선 사진식각공정으로 정밀도가 높은 다양한 3차원의 회전체 구조물을 제조하는 방법을 제시하였다.

  • PDF

Design and Fabrication of Aperture-Coupled Microstrip Cylindrical Dielectric Resonant Antenna for Wireless LAN (무선 LAN용 개구결합 마이크로스트립 원통형 유전체 공진 안테나 설계 및 제작)

  • 이권익;김흥수
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.12 no.3
    • /
    • pp.425-431
    • /
    • 2001
  • In this paper, on aperture-coupled microstrip cylindrical dielectric resonant antenna(DRA) consisting of dielectric material with permittivity ${\epsilon}_{r}$ = 36 is designed and fabricated fir wireless LAN. First of all, the feedline length, width, slot length and width of the feeding element were calculated using the theory of microstrip transmission line. Radiation element is designed using the theory of cylindrical dielectric cavity, Resonant frequency of the fabricated cylindrical DRA is 2.449 GHz and VSWR, return loss and bandwidth is 1.009, -47 dB and 70 MHz, respectively. Front-to-back radiation ratio is about 12 dB and 3 dB beamwidth of E-plane and H-plane is 110$^{\circ}$ and 90$^{\circ}$ , respectively.

  • PDF

An Experimental Approach for Verifying the Effect of Scattered Gamma-rays on the “Before Glow”in a Thermoluminescent Glow Curve

  • Jun, Jae-Shik;Lee, Hee-Yong
    • Nuclear Engineering and Technology
    • /
    • v.4 no.1
    • /
    • pp.3-10
    • /
    • 1972
  • In order to verify the contribution of scattered photons in a restricted gamma-cell as a cause of the“before glow”on a thermoluminescent glow curve of natural quartz, the ratio of the scattered to primary radiation contributions (S/P) in the cell is measured and the relationship between the effective“before glow”height ( $h_{b}$) and S/P ratio is quantitatively investigated. The result shows quite good linear relationship between them with a correlation coefficient of +0.9, which possibly suggests that the electrons originally released by the photons of reduced energy are trapped in the shallower traps. Moreover, the ratios of $h_{b}$ to total glow area (At) and of effective “before glow”area (Ab) to At are also examined to see the relationships between S/P and each of them, respectively. The relationships are represented by exponential functions in the region of S/P greater than 0.035. Finally, the exposure limit for re-use of the natural quartz as a TLD was found to be approximately 10$^{5}$ R by analyzing total thermoluminescent output and corresponding exposure dose.ose.

  • PDF

High-Speed Power Line Communication System using CCK Modulation (CCK 변조기법을 이용한 고속 PLC 시스템에 관한 연구)

  • Park, G.H.;Choi, Y.G.;Lee, B.K.;Kim, H.M.;Cha, J.S.;Shin, M.C.
    • Proceedings of the KIEE Conference
    • /
    • 2003.07a
    • /
    • pp.274-276
    • /
    • 2003
  • 전력선 통신은 새로운 통신전용 선로나 별도의 추가 시설 없이, 기존의 전력 공급용 전력선로를 통신선로로 병용할 수 있다는 장점을 갖고 있다. 하지만 이러한 전력선 통신은 다양한 부하의 운전과 빈번한 부하의 기동 정지로 인하여 잡음이 발생하며 이에 본 연구에서는 전력선 채널의 협대역 잡음에 대처하는 변조방식을 제시함과 동시에 최근 들어 고용량 데이터 전송이 빈번한 홈 네트워크분야에 응용될 수 있는 고속 전력선 통신 기법을 제안하고자 한다. 본 논문에서 제안한 전력선 통신의 변조기법은 현재 무선 LAN에서 보편화된 변조방식으로 적용되고 있는 IEEE 802.11b의 CCK(Complementary Code Keying) 변조 방식이다. 채널 모델링은 댁내 전력선망을 기준으로 $10kHz{\sim}30MHz$ 대역에서의 전력선로 및 가정용 부하 특성에 기초한 모델링을 하였고 전력 계통 과도해석 소프트웨어인 PSCAD로 채널 모델을 구성하여 홈네트워크 환경에서의 전력선 통신의 신호 특성을 분석하였다.

  • PDF

Design and Fabrication of the Ka-band Waveguide to Microstrip Transition using Probe structure (프로브 구조를 이용한 Ka 대역 도파관-마이크로스트립 트랜지션의 설계 및 제작)

  • Kwon, Hyuk-Ja;Lee, Sung-Ju;Jang, Ho-Joon
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.45 no.7
    • /
    • pp.67-71
    • /
    • 2008
  • We report the waveguide to microstrip transition using probe structure for Ka-band transceiver. The waveguide to microstrip transition is composed of probe, inductive line, ${\lambda}/4$ impedance transformer, and $50{\Omega}$ microstrip line. For design of the transition, we optimized the characteristic impedances and the lengths of the component parts. The fabricated transition exhibits an insertion loss of 1.3 dB and the input/output return losses of below 14 dB between 30 and 40 GHz. The insertion loss of each transition is about $0.5{\sim}0.6dB$, considering the losses in the microstrip line and input/output waveguides.