• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.725-727
• /
• 2009

Lowering the dielectric constant is one of the important issues for the efficiency and the power consumption in the plasma display panel (PDP) industry. This study examined the effect of the addition of ceramic filler (up to 10% of crystalline and amorphous silica, respectively) to a $B_2O_3$-ZnO- $P_2O_5$ glass matrix on the dielectric, coefficient of thermal expansion, etching behaviors and residual stress for the barrier ribs in plasma display panels. The dielectric constant of barrier ribs is affected by containing two types of $SiO_2$ filler for the barrier rib composition in PDP.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.4
• /
• pp.295-299
• /
• 2011

Blind equalization techniques have been widely used in wireless communication systems. In this paper, we propose to apply the balanced information potentials to the criterion of minimum Euclidian distance between two PDFs with constant modulus errors for adaptive blind equalizers. One of the two PDFs is constructed with constant modulus error samples and another does with Dirac delta functions. Two information potentials derived from the criterion are balanced in order to have better performance by putting a weighting factor to each information potentials. The proposed blind algorithm has shown in the MSE convergence performance that it can produce enhanced performance by over 3 dB of steady state MSE.

• Bulletin of the Korean Mathematical Society
• /
• v.59 no.6
• /
• pp.1327-1337
• /
• 2022

Zero-difference balanced (ZDB) functions can be applied to many areas like optimal constant composition codes, optimal frequency hopping sequences etc. Moreover, it has been shown that the image set of some ZDB functions is a regular partial difference set, and hence provides strongly regular graphs. Besides, perfect nonlinear functions are zero-difference balanced functions. However, the converse is not true in general. In this paper, we use the decomposition of cyclotomic polynomials into irreducible factors over 𝔽_p, where p is an odd prime to generalize some recent results on ZDB functions. Also we extend a result introduced by Claude et al. [3] regarding zero-difference-p-balanced functions over 𝔽_pⁿ. Eventually, we use these results to construct some optimal constant composition codes.

• The Korean Journal of Ecology
• /
• v.27 no.2
• /
• pp.93-98
• /
• 2004

Decay rate and nutrient dynamics during decomposition of oak (Quercus acutissima) branches were investigated for 33-months in Kongju, Korea. After 33-months, remaining weight of B₁, B₂ and B₃ was 44.5%, 58.5% and 55.37%, respectively. Decomposition constant (k) for B₁, B₂ and B₃ was 0.294/yr, 0.195/yr, 0.215/yr, respectively. N concentration in decomposing oak branches increased in all diameter classes. After 33-months, remaining N in B₁, B₂ and B₃ was 101.2%, 91.9%, 104.4%, respectively. P concentration in decomposing oak branches increased in B₁ and B₂, and there was no immobilization period. After 33-months, remaining P in B₁, B₂ and B₃ was 57.2%, 74.4%, 53.9%, respectively. K concentration in decomposing oak branches decreased significantly. Remaining K in B₁, B₂ and B₃ was 7.7%, 17.1% and 17.2%, respectively, which was significantly lower than other nutrients. Ca concentration in decomposing oak branches increased in B₂ and B₃. After 33-months, remaining Ca in B₁, B₂ and B₃ was 58.5%, 47.8% and 75.2%, respectively. Initial concentration of Mg in oak branch was higher in smaller diameter class. After 33-months, remaining Mg in B₁, B₂ and B₃ was 44.3%, 57.9% and 47.7%, respectively.

• The Korean Journal of Ceramics
• /
• v.4 no.4
• /
• pp.394-398
• /
• 1998

$Pb_{1-x}Sr_x(Mg-{1}2}W_{1}2})O_3$$ ceramics for application in the microwave frequency range were investigated by dielectric constant and X-ray diffraction measurements. The dielectric constant curves showed two concentration dependent characteristics in the $$Pb(Mg-{1}2}W_{1}2})O_3$-rich$ region. As the Sr constant further increases to x=0.3 the dielectric curve levels off. In the concentration range between x=0.4 and x=1 in which dielectric constant dependence on temperature is negligible, it decreases and Qf value increases in the microwave frequency with increasing Sr. The temperature coefficient (${\tau}_{\varepsilon} $) of the dielectric constant changes from the negative to positive value between x=0.9 and x=1. The dielectric constant, Qf and $\tau\varepsilon$ are correlated with tolerance factor(t). From the X-ray diffraction results for $0.1{\le}x{\le}1$ the cell parameter is found to decrease as x increases and B-site ordering is observed in all the composition ranges.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1322-1327
• /
• 2004

There are some previous studies that utilize constant impedance models or constant current models for electric trains to perform the static analysis of AT feeding systems. These mentioned models have some merits of linear systems but yield erroneous results because of the innate restraints of the models since linear models cannot represent the features of constant power in inverter-driven trains. From these reasons, it is suitable that the train be considered as a constant load model when it drives or as a constant source model when it applies regenerative brake. However, excessive rise of regenerative voltage during the braking may damage the vehicle itself and the feeding systems so the voltage must be restricted below a certain value. Keeping these facts in minds, we suggest new methods of analyzing AT feeding systems using the constant power models with the conditions of voltage constraints. The simulation results from a sample system using the proposed method illustrate both the states of system variables and the supply-demand relation of power among the trains and the systems very clearly, so it is believed that the proposed method yields more accurate results than conventional methods do.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.54-62
• /
• 1994

This paper presents active control methodologies to suppress structural deflections of a composite beam using a distributed piezoelectric-film actuator and sensor. Three types of different controllers are employed to achieve vibration suppression. The controllers are established depending upon the information on the velocity components of the structrue and on the deflection magnitudes as well. They are constant-amplitude controller(CAC), constant-gain mcontroller(CGC), and constant-amplitude-gain controller(CAGC). For the minimization of the residual vibration (chattering in a settled phase), which is the practical shortcoming of the conventional CAC dur to time delay phenomenon of the hardware system, a new control algoritym CAGCis designed by selecting switching constants in an optimal manner with respect to the initial tip deflection and the applied voltage. The experimental investigations of the transient and forced vibration control for the first vibrational mode are undertaken in order to compare the suppression efficiency of each control algorithm. Moreover, simultaneous controllability of various vibrational modes through the proposed scheme is also experimentally verified by pressenting both the transfer function and the phase.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.6
• /
• pp.411-420
• /
• 1986

Quantization noise of nonadaptive Linear Delta Modulation(LDM) and adaptive Constant Factor Delta Modulation(CFDM) systems is studied. The formulas for quantization noise of CFDM system are derived on the basis of the rusults of LDM. And the output signal-to-quantization noise ratios(SNR) in LDM and CFDM systems are calculated in the range of bit rates from 16[Kb/s] to 96[Kb/s]. By comparing LDM and CFDM, it is known that the adaptive DM is superior to non-adaptive DM by 8[dB] when bit rate is 20[Kb/s] and SNR advantage increases to 14[dB] when bit rate is 56[Kb/s]. All the theoretical results agree well with the experimental results.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.10 no.S_4
• /
• pp.157-164
• /
• 2001

The performance of fluidized-bed reactor with Photomedia, immobilized TiO$_2$ onto the porous ceramic ball using a sol-gel method has been studied in this work. A simple model substrate, dilute Rhodamine B (RhB), was decolorized at room temperature. For the purpose of comparison, the slurry reactor and the Inner Wall Coated Reactor (IWCR) were used. The aim of this work was to develop the photocatalytic fluidized bed reactor (PFBR) through contrasting the photodegradability of various reactors such as the TiO$_2$slurry reactor, the inner-wall coated reactor (IWCR). In this study, the RhB was decolorized in three types of reactor. Even though the reaction rate constant of PFBR was lower than that of slurry reactor, PFBR had the advantages of preventing the wash-out of photocatalyst, so it can be operated continuously.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2004.12a
• /
• pp.3-11
• /
• 2004

The power loss analysis was carried out for Ni-Cu-Zn ferrite samples with different content of NiO and ZnO. The power loss, Pcv decreases monotonically wi increasing temperature and attains to a certain value at around $100\~120$ degrees Celsius. The frequency dependence of Pcv can be explained by $Pcv\~f^n$', and n is independent of the frequency, f up to 1MHz. The Pcv decreases with an increase in ZnO/NiO. The Pcv was separated to hysteresis loss, Ph and residual loss, (Pcv-Ph). The temperature characteristics and compositional dependence of Pcv can be attributed to the Ph, while (Pcv-Ph) is not affected by both temperature and ZnO/NiO. By analyzing temperature and composition dependence of Ph and initial permeability, ${\mu}^i$ following equations could be formularized. $${\mu}_i{\mu}o=I_x\;^2/(K_1+bs_ol_s)\;\;\;\;(1)$$ $Wh=13.5(I_s\;^2/{\mu}_i{\mu}_o)\;\;\;\;(2)$$ Were ${\mu}_o$ is permeability of vacuum, $I_s$ saturation magnetization, $K_1$ anisotropy constant, $S_o$ internal heterogeneous stress, $I_s$, magnetostriction constant, b unknown constant. Wh hysteresis loss per one cycle of excitation (Ph: Wh*f). Steinmetz constant of Ni-Cu-Zn ferrites, $m=1.64\~2.2$ is smaller than the one of Mn-Zn ferrites, which suggests the difference of loss mechanism between these materials.