• Proceedings of the Korean Fiber Society Conference
• /
• 1990.06b
• /
• pp.67-67
• /
• 1990

Three non-ionic and two anioinic spin probes, differing in size and substituent, were synthesized. Their mobility in dried nylon 6 film was investicated by the spin probe technique using electron spin resonance spectrometer. When the size of a spin probe was large and the interaction between the probe molecules and polymer chains existed, the mobility of spin probes decreased. From Arrhenius plots of rotational correlation time, one discontinuity point ($T_d$) was determined. The activation energies for rotation below and above $T_d$ were discussed in terms of the mode of probe rotation. Three spin probes could be viewed as azo dyes having a built-in nitroxide radical. Photolysis of them in dimethylformamide and in nylon 6 film was performed by exposure to 254 nm UV light in the presence of air. It was found that dyes having a built-in nitroxide radical showed better photostability than dyes derived from ${\bata}-naphthol$..

• Journal of Environmental Science International
• /
• v.5 no.1
• /
• pp.71-81
• /
• 1996

Direct Sky Blue-5B is an Azo dye known as general for staining of textile and leather, etc., and as materials which are difficult to be biodegraded in nature. The bacterium strain which could degrade direct Sky Blue-5B was isolated from activated sludge of dyeing factory and identified as Proteus sp. by experiment on morphological, cultural and biochemical characteristics, and so named Proteus sp. ST-1. The optimum condition of the strain for degradation of Sky Blue-5B were at about 35$^{\circ}C$ and PH 7~8. The strain had been capable of degradation with organic nitrogen effectively and had completely degraded 200mg/1 of the dye within 12hrs at 37$^{\circ}C$. The enzyme system related to degradation of Azo dye may be intracellular, and so degraded the dye after absorption into cell. The degradation products of Sky Blue-5B by Proton sp. 57-1 were analyzed by Gas Chromatography /Mass Spectrometry and Spectrophotomer, from this observation, it may be infered that the strain degraded the dye directly without any mediate.

• Advances in environmental research
• /
• v.9 no.3
• /
• pp.161-173
• /
• 2020

The removal of two dyes, namely Methylene Blue (MB) and Reactive Brillant Red (RR) from aqueous solution was investigated using magnetite iron coated pumice (MIP) composite in the Fenton-like oxidation process. A weight ratio of 2.5 g (with the molar ratio of Fe³⁺ to Fe²⁺ to be 2) (5%) of iron to the total pumice (50 g) was enabled during synthesis of catalyst. Surface composition and characteristics of the catalyst were assessed by SEM-EDX, FT-IR, Raman spectral analysis. The effect of the amount of pumice solely used or MIP, H₂O₂ concentration, pH and initial concentration of MB or RR dyes on Fenton-like process efficiency was investigated. EDAX spectrums of pumice and MIP showed that oxygen and silisium are the major elements. The Fe content of MIP increased to 2.24%. SEM, FT-IR and Raman spectrums confirmed the impregnation of Fe on pumice surface. The experimental results revealed that high removal rates of dyes could be obtained using MIP that demonstrated a higher stability for removal of MB dye. pH affected the removal efficiency of both dyes and the degradation of both dyes was sharply dropped when pH was increased above 4. The removal of dyes did not significantly change with increasing H₂O₂ concentration. Degradation rates of both MB and RR dyes increased 3.3 and 2.8 times with the use of MIP compared to pumice alone, respectively. Furthermore, MIP enabled a good removal efficiency at higher dye concentrations. It can be emphasized that MIP composite can be used in the heterogeneous Fenton-like systems considering the economic and easily separation aspects.

• Applied Biological Chemistry
• /
• v.49 no.3
• /
• pp.165-169
• /
• 2006

A Citrobacter sp. MB 2, azo dyes decolorizing bacterium, was isolated from the wastewater and soil and identified as Citrobacter sp.. It was examined that optimum conditions for culture media were 0.5% of sucrose, 1.0% of yeast extract, 0.1% of $K_2HPO_4$, 0.1% of $NaHCO_3$ per distilled water. The best efficient condition of culture was obtained at pH 7.0, $30^{\circ}C$ and aerobic shaking culture. The number of Citrobacter sp. MB2 in optimum medium was increased more than 7 fold compared to basal medium and 50 fold compared to nutrient broth. This strain was exhibited strong resistance against metal salts and antibiotics (ampicillin and penicillin G).

• Analytical Science and Technology
• /
• v.19 no.1
• /
• pp.31-38
• /
• 2006

Micellar electrokinetic capillary chromatography(MECC) and HPLC with ion-pairing mechanism were applied for the separation of the well known environmental wastes from dye industry. These compounds include H-acid, J-acid, ${\gamma}$-acid, orthanilic acid, sulfanilic acid and 2-naphthylamine-1,5-disulfonic acid, and are known to be the diazo components of the azo dye. MECC method was also applied to separate few acid dyes including Acid Orange 7, Acid Orange 5 and Acid Blue 92 and direct dye such as Direct Red 80. Informations about the diazo components of any azo dye could be obtained by comparison of electropherogram of the reduction solution of a given dye with those obtained from standard materials such as H-acid, J-acid, ${\gamma}$-acid, orthanilic acid, sulfanilic acid and 2-naphthylamine-1,5-disulfonic acid. It has been concluded that MECC and HPLC with ion-pairing mechanism could be successfully applied for the analysis of unknown dyes and their diazo components.

• Journal of Sericultural and Entomological Science
• /
• v.23 no.1
• /
• pp.56-64
• /
• 1981

The textile fabric contains the functions of sanitation, decoration, wearing style and washing in the practical use. Among various tetile fiber, silk has less utilities than synthetic fiber in practical use although silk has good benefits of the high quality of silk fabric. Thus no textile fiber, neither natural norsynthetic, has all the functions. In this sense, many compound fabrics have been improved to reveal various functions of fabric However, this has been disturbed with the problem of dyeing, expecially in the case of compound fabric of silk. The work is carried out to improve the dyeing method of compound fabric of polyester and silk. The results obtained are as follows: 1. In the dyeing of compound fabric(P/S fabric), azo dyes was more suitable than anthraquinone dyes. 2. According to the carrier, dyeing spot was appeared by the high concentration in bath. 3. Degree of dye fixation was decreased in dyeing of methylnaptharine carrier(D.N) and anion disperser(T.S). 4. The affinity of dye was suitable in the dyeing bath of azo dye, trichlorobenzene carrier and nonion disperser. 5. Dye fixation of silk side in compound fabric by acid dye showed higher in acid bath of dyeing. 6. In printing of silk and polyester compound fabric, it must be understood relationship among fibers, dyes, and steaming conditions.

• Journal of the Korean Chemical Society
• /
• v.28 no.6
• /
• pp.425-432
• /
• 1984

We obtained fast dyed polypropylene fiber, which has no functional group to be dyed, by producing a carbene on the dye molecule by the pyrolysis of lithium salt of dye molecule-tosylhydrazone, then the carbene simultaneously inserted into a C-H bond of polypropylene. To investigate the possibility of actual use in the industry, a variety of reactive azo dyes were prepared from aldehyde, acetophenone and benzophenone derivatives by changing reactive site of precursors which greatly affected properties of dyes. Reactive dyes of the benzophenone derivatives were excellent in the reaction with polypropylene, especially, a dye prepared from chloroaminobenzophenone with N,N-dimethyl aniline was found most excellent.

• Advances in environmental research
• /
• v.3 no.4
• /
• pp.293-306
• /
• 2014

The present study primarily focuses on the evaluation of the comparative effect of chemical coagulation and ultrasonication for elimination of aromatic amines (AAs) present in anaerobically pretreated textile wastewater containing different types of dyes including azo dyes. Color and COD reduction was also monitored at the optimized conditions. The production of AAs was measured spectrophotometrically in the form of total aromatic amines (TAAs) and also verified with high performance liquid chromatography (HPLC) selectively. A composite coagulant, magnesium chloride (MC) aided with aluminium chlorohydrate (ACH) in an equal ratio (MC + ACH) was utilized during the coagulation process, which yielded 31% of TAAs removal along with 85% of color and 52% of COD reduction. At optimized power (200 W) and sonication time (5 h), an appreciable TAAs degradation efficiency (85%) was observed along with 51% color reduction and 62% COD removal using ultrasonication. The chromatographic data indicate that sulphanilic acid and benzidine types of aromatic amines were produced after the reductive cleavage of utilized textile dyes, which were effectively mineralized after ultrasonication. The degradation followed the first order kinetics with a correlation coefficient ($R^2$) of 0.89 and a first-order kinetic constant (k) of $0.0073min^{-1}$.

• Journal of Korean Society of Water and Wastewater
• /
• v.38 no.1
• /
• pp.17-27
• /
• 2024

This paper aims to study the degradation process for refractory azo dye namely Reactive Black 5(RB5) by potassium ferrate(VI) synthesized using the wet oxidation method. The process of degradation of azo dyes by Ferrate was studied with several parameters such as pH, different Ferrate(VI) dosage, different azo dye initial concentration, and temperature. A second-order reaction was observed in all degradation processes for RB5 having the highest degradation efficiency. The highest k_app value of RB5 degradation was 190.49 M^-1s^-1. In the pH experiments, the neutral condition has been identified as the optimum condition for the degradation of RB5 with 63.2% of dye removal. The efficiency of degradation also depends on the amount of ferrate(VI) available in the reactor. Degradation efficiency increased with an increase in Potassium Ferrate(VI) dosage or a decrease of RB5 initial concentration. The temperature has been reported as one of the most important parameters. From the results, increasing the temperature(up to 45℃) will increase the degradation efficiency of azo dye by Ferrate(VI) and if the temperature exceeds 45℃, the degradation efficiency will be decreased.

• Applied Chemistry for Engineering
• /
• v.17 no.4
• /
• pp.426-431
• /
• 2006

Acryl and vinyl sulfone functionalized blue and orange azo dyes were prepared by the coupling reaction of 6-bromo-2-cyano-4-nitroaniline and 2,5-dimethoxy-4-(vinylsulfonyl)benzenamine with 3-acrylamido-(N,N-diethylamino)benzene and 3-methyl-(N,N-diethylamino)benzene, respectively, for the coloring of poly(methyl methacrylate) (PMMA). Allyl functionalized dye was also prepared by reacting vinyl sulfone-containing dye with allylamine. Three types of dyeing method were used: the copolymerization of reactive dye with methyl methacrylate (MMA) and dyeing by polymerization of MMA in the presence of polymeric dye and dye 2 without reactive function. The color fastness for the three PMMAs were evaluated by comparing the solubility of dye under various conditions.