DOI QR코드

DOI QR Code

Synthesis of magnetite iron pumice composite for heterogeneous Fenton-like oxidation of dyes

  • Cifci, Deniz Izlen (Corlu Engineering Faculty, Environmental Engineering Department, Tekirdag Namik Kemal University) ;
  • Meric, Sureyya (Corlu Engineering Faculty, Environmental Engineering Department, Tekirdag Namik Kemal University)
  • Received : 2019.08.17
  • Accepted : 2020.07.17
  • Published : 2020.09.25

Abstract

The removal of two dyes, namely Methylene Blue (MB) and Reactive Brillant Red (RR) from aqueous solution was investigated using magnetite iron coated pumice (MIP) composite in the Fenton-like oxidation process. A weight ratio of 2.5 g (with the molar ratio of Fe3+ to Fe2+ to be 2) (5%) of iron to the total pumice (50 g) was enabled during synthesis of catalyst. Surface composition and characteristics of the catalyst were assessed by SEM-EDX, FT-IR, Raman spectral analysis. The effect of the amount of pumice solely used or MIP, H2O2 concentration, pH and initial concentration of MB or RR dyes on Fenton-like process efficiency was investigated. EDAX spectrums of pumice and MIP showed that oxygen and silisium are the major elements. The Fe content of MIP increased to 2.24%. SEM, FT-IR and Raman spectrums confirmed the impregnation of Fe on pumice surface. The experimental results revealed that high removal rates of dyes could be obtained using MIP that demonstrated a higher stability for removal of MB dye. pH affected the removal efficiency of both dyes and the degradation of both dyes was sharply dropped when pH was increased above 4. The removal of dyes did not significantly change with increasing H2O2 concentration. Degradation rates of both MB and RR dyes increased 3.3 and 2.8 times with the use of MIP compared to pumice alone, respectively. Furthermore, MIP enabled a good removal efficiency at higher dye concentrations. It can be emphasized that MIP composite can be used in the heterogeneous Fenton-like systems considering the economic and easily separation aspects.

Keywords

References

  1. Alver, A., Karaarslan, M. and Kilic, A. (2016), "The catalytic activity of the iron-coated pumice particles used as heterogeneous catalysts in the oxidation of natural organic matter by H2O2", Environ. Technol., 37(16), 2040-2047. https://doi.org/10.1080/09593330.2016.1139632.
  2. Awazu, K. and Kawazoe, H. (2003), "Strained Si-O=Si bonds in amorphous $SiO_2$ materials: A family member of active centers in radio, photo, and chemical responses", J. Appl. Phys., 94(10), 6243-6262. https://doi.org/10.1063/1.1618351.
  3. Azmi, N.H.M., Vadivelu, V.M. and Hameed, B.H. (2014), "Iron-clay as a reusable heterogeneous Fenton like catalyst for decolorization of acid green 25", Desalin. Water Treat., 52(28-30), 5583-5593. https://doi.org/10.1080/19443994.2013.814009.
  4. Chen, A., Ma, X. and Sun, H. (2008), "Decolorization of KN-R catalyzed by Fe-containing Y and ZSM-5 zeolites", J. Hazard. Mater., 156, 568-575. https://doi.org/10.1016/j.jhazmat.2007.12.059.
  5. Cifci, D.I. and Meric, S. (2015), "A review on pumice for water and wastewater treatment", Desalin. Water Treat., 57(39), 18131-18143. https://doi.org/10.1080/19443994.2015.1124348.
  6. Cifci, D.I. and Meric, S. (2015b), "Oxidative removal of methyl red dye by Fe supported pumice in presence of $H_2O_2$", J. Desalin. Water Purif., 1(1), 6-11.
  7. C ifci, D.I. and Meric, S. (2017), "Single and binary adsorption of iron and manganese in synthetic water using activated pumice composites: Effect of mono and divalent ions, desorption and reuse, isotherms", Desalin. Water Treat., 71, 52-61. https://doi.org/10.5004/dwt.2017.20632.
  8. Das, S. and Hendry, M.J. (2011), "Application of Raman spectroscopy to identify iron minerals commonly found in mine wastes", Chem. Geol., 290(3-4), 101-108. https://doi.org/10.1016/j.chemgeo.2011.09.001.
  9. Daud, N.K., Ahmad, M.A. and Hameed, B.H. (2010), "Decolorization of acid red 1 dye solution by Fentonlike process using Fe-montmorillonite K10 catalyst", Chem. Eng. J., 165(1), 111-116. https://doi.org/10.1016/j.cej.2010.08.072.
  10. Daud, N.K. and Hameed, B.H. (2011), "Acid red 1 dye decolorization by heterogeneous Fenton-like reaction using Fe/kaolin catalyst", Desalination, 269(1-3), 291-293. https://doi.org/10.1016/j.desal.2010.11.016.
  11. Dukkanci, M., Gunduz, G., Yilmaz, S., Yaman, Y.C., Prikhod'ko, R.V. and Stolyarova, I.V. (2010), "Characterization and catalytic activity of CuFeZSM-5 catalysts for oxidative degradation of rhodamine 6G in aqueous solutions", Appl. Catal. B Environ., 95(3-4), 270-278. https://doi.org/10.1016/j.apcatb.2010.01.004.
  12. Guru, S., Mishra, D., Singh, M., Amritphale, S.S. and Josh, S. (2016), "Effect of $SO_4{^2-}$, $Cl^-$ and $NO_3^-$ anions on the formation of iron oxide nanoparticles via microwave synthesis", Prot. Met. Phys. Chem. S., 52(4), 627-631. https://doi.org/10.1134/S2070205116040146.
  13. Hassan, H. and Hameed, B.H. (2011), "Fe-clay as effective heterogeneous Fenton catalyst for the decolorization of reactive blue 4", Chem. Eng. J., 171(3), 912-918. https://doi.org/10.1016/j.cej.2011.04.040.
  14. Jayarathne, L., Ng, W.J., Bandara, A., Vitanage, M., Dissanayake, C.B. and Weerasooriya, R. (2012), "Fabrication of succinic acid-$\gamma$-$Fe_2O_3$ nano core-shells", Colloid. Surf. A, 403, 96-102. https://doi.org/10.1016/j.colsurfa.2012.03.061.
  15. Kaplan Bekaroglu, S.S., Yigit, N.O., Harman, B.I. and Kitis, M. (2016), "Hybrid adsorptive and oxidative removal of natural organic matter using iron oxide-coated pumice particles", J. Chem., 3108034. http://doi.org/10.1155/2016/3108034.
  16. Karimaian, K.A., Amrane, A., Kazemian, H., Panahi, R. and Zarrabi, M. (2013), "Retention of phosphorous ions on natural and engineered waste pumice: Characterization, equilibrium, competing ions, regeneration, kinetic, equilibrium and thermodynamic study", Appl. Surf. Sci., 284, 419-431. https://doi.org/10.1016/j.apsusc.2013.07.114.
  17. Kitis, M. and Kaplan, S.S. (2007), "Advanced oxidation of natural organic matter using hydrogenperoxide and iron-coated pumice particles", Chemosphere, 68(10), 1846-1853. https://doi.org/10.1016/j.chemosphere.2007.03.027.
  18. Legodi, M.A. and de Waal, D. (2007), "The preparation of magnetite, goethite, hematite and maghemite of pigment quality from mill scale iron waste", Dyes Pigments, 74(1), 161-168. https://doi.org/10.1016/j.dyepig.2006.01.038.
  19. Messele, A., Soares, O.S.G.P., O rfao, J.J.M., Bengoa, C., Stuber, F., Fortuny, A., Fabregat, A. and Font, J. (2015), "Effect of activated carbon surface chemistry on the activity of ZVI/AC catalysts for Fenton-like oxidation of phenol", Catal. Today, 240, 73-79. https://doi.org/10.1016/j.cattod.2014.03.063.
  20. Nogueira, A.E., Castro, I.A., Giroto, A.S. and Magriotis, Z.M. (2014), "Heterogeneous Fenton-like catalytic removal of methylene blue dye in water using magnetic nanocomposite (MCM-41/Magnetite)", J. Catal, 712067. http://doi.org/10.1155/2014/712067.
  21. Pastrana-Martinez, L.M., Pereira, N., Lima, R., Faria, J.L., Gomes, H.T. and Silva, A.M.T. (2015), "Degradation of diphenhydramine by photo-Fenton using magnetically recoverable iron oxide nanoparticles as catalyst", Chem. Eng. J., 261, 45-52. https://doi.org/10.1016/j.cej.2014.04.117.
  22. Rache, M.L., Garcia, A.R., Zea, H.R., Silva, A.M.T., Madeira, L.M. and Ramirez, J.H. (2014), "Azo-dye orange II degradation by the heterogeneous Fenton-like process using a zeolite Y-Fe catalyst-kinetics with a model based on the Fermi's equation", Appl. Catal. B Environ., 146, 192-200. https://doi.org/10.1016/j.apcatb.2013.04.028.
  23. Ramachandran, G. and Kumarasamy, T. (2013), "Degradation of textile dyeing wastewater by a modified solar photo-Fenton process using steel scrap/$H_2O_2$", Clean Soil Air Water, 41(3), 267-274. https://doi.org/10.1002/clen.201100462.
  24. Rusevova, K., Kopinke, F.D. and Georgi, A. (2012), "Nano-sized magnetic iron oxides as catalysts for heterogeneous Fenton-like reactions-Influence of Fe(II)/Fe(III) ratio on catalytic performance", J. Hazard. Mater., 241-242, 433-444. https://doi.org/10.1016/j.jhazmat.2012.09.068.
  25. Sepehr, M.N., Sivasankar, V., Zarrabi, M. and Kumar, M.S. (2013), "Surface modification of pumice enhancing its fluoride adsorption capacity: An insight into kinetic and thermodynamic studies", Chem. Eng. J., 228, 192-204. https://doi.org/10.1016/j.cej.2013.04.089.
  26. Sepehr, M.N., Amrane, A., Karimaian, K.A., Zarrabi, M. and Ghaffari, H.R. (2014), "Potential of waste pumice and surface modified pumice for hexavalent chromium removal: Characterization, equilibrium, thermodynamic and kinetic study", J. Taiwan Inst. Chem. Eng., 45(2), 635-647. https://doi.org/10.1016/j.jtice.2013.07.005.
  27. Shayesteh, H., Rahbar-Kelishami, A. and Norousbeigi, R. (2016), "Evaluation of natural and cationic surfactant modified pumice for congo red removal in batch mode: Kinetic, equilibrium, and thermodynamic studies", J. Mol. Liq., 221, 1-11. https://doi.org/10.1016/j.molliq.2016.05.053.
  28. Su, C., Li, W., Liu, X., Huang, X. and Yu, X. (2016), "Fe-Mn-sepiolite as an effective heterogeneous Fenton-like catalyst for the decolorization of reactive brilliant blue", Front. Environ. Sci. Eng., 10(1), 37-45. https://doi.org/10.1007/s11783-014-0729-y.
  29. TWPCR (2004), Turkish Water Pollution Control Regulation, Official Gazette No. 25687, Ankara, Turkey.
  30. WHO (2007), Guidelines for Drinking-Water Quality, Fourth Edition, NLM Classification: WA 675, Geneva, Switzerland.
  31. Wu, Y., Yang, M., Hu, S., Wang, L. and Yao, H. (2014), "Characteristics and mechanisms of 4A zeolite supported nanoparticulate zero-valent iron as Fenton-like catalyst to degrade methylene blue", Toxicol. Environ. Chem., 96(2), 227-242. https://doi.org/10.1080/02772248.2014.931960.
  32. Xavier, S, Gandhimathi, R., Nidheesh, P.V. and Ramesh, S.T. (2015), "Comparison of homogeneous and heterogeneous Fenton processes for the removal of reactive dye magenta MB from aqueous solution", Desalin. Water Treat., 53(1), 109-118. https://doi.org/10.1080/19443994.2013.844083.
  33. Xu, L. and Wang, J. (2012), "Fenton-like degradation of 2,4-dichlorophenol using $Fe_3O_4$ magnetic nanoparticles", Appl. Catal. B Environ., 123, 117-126. https://doi.org/10.1016/j.apcatb.2012.04.028.
  34. Yaman, C. and Gunduz, G. (2015), "A parametric study on the decolorization and mineralization of C.I. reactive red 141 in water by heterogeneous Fenton-like oxidation over FeZSM-5 zeolite", J. Environ. Health Sci., 13(1), 1-12. https://doi.org/10.1186/s40201-015-0162-6.
  35. Yang, K., Peng, H., Wen, Y. and Li, N. (2010), "Re-examination of characteristic FTIR spectrum of secondary layer in bilayer oleic acid-coated $Fe_3O_4$ nanoparticles", Appl. Surf. Sci., 256, 3093-3097. https://doi.org/10.1016/j.apsusc.2009.11.079.
  36. Zotov, N., Ebbsjo, I., Timpel, D. and Keppler, H. (1999), "Calculation of raman spectra and vibrational properties of silicate glasses: comparison between Na2Si4O9 and SiO2 glasses", Phys. Rev. B, 60(9), 6383-9397. https://doi.org/10.1103/PhysRevB.60.6383.

Cited by

  1. A comprehensive review of the Fenton-based approaches focusing on landfill leachate treatment vol.10, pp.1, 2020, https://doi.org/10.12989/aer.2021.10.1.059