• The korean journal of orthodontics
• /
• v.18 no.1 s.25
• /
• pp.65-78
• /
• 1988

The development of good arch form, the orientation of the dentition with relation to the craniofacial skeleton and the establishment of correct relationship of axial inclination of upper and lower teeth are required in normal occlusion, but different teeth present different degrees of axial inclination. The purpose of this study was to investigate the axial inclination of upper and lower teeth by analyzing $45^{\circ}$ oblique and $90^{\circ}$ cephalometric roentgenograms of 35 Korean males and 34 females with normal occlusion. The obtained results were as follows: 1. Mean and standard deviation of mesiodistal axial inclination of upper and lower teeth related to palatal plane and occlusal plane were obtained. 2. Mesiodistal axial inclination of upper first premolar was nearly perpendicular to palatal plane, and the axis of lower first premolar was nearly perpendicular to occlusal plane. 3. There was no difference in the mesiodistal axial inclination of anteriorly positioned teeth between the three groups: third molar eruption into good alignment (Group 1), third molar impaction or partial eruption (Group 2), third molar agenesis (Group 3). 4. There were low correlationships only between the axial inclination of central incisor and the mesiodistal axial inclination of canine and first premolar, but no correlationships between central incisor and posterior teeth behind first premolar.

• The korean journal of orthodontics
• /
• v.23 no.3 s.42
• /
• pp.391-403
• /
• 1993

For the purpose of investigating mesiodistal axial inclination of posterior teeth in normal occlusion group, open bite and deep bite group and investigating the correlationship between the axial inclination of posterior teeth and overbite of anterior teeth, a cephalometric study was performed on the subjects consisted of normal occlusion group(40), open bite group(71 : Angle's Class I, Class II, division 1 25, Class III 25) and deep bite group(64 : Angle's Class I 23, Class II, division 1 21, Class III 20). Mesiodistal axial inclination of posterior teeth to occlusal, mandibular and palatal plane were measured. The findings of this study were as follows : 1. Upper and lower posterior teeth were more mesially inclined to occlusal plane in open bite group than in deep bite group. 2. Lower posterior teeth were more mesially inclined in deep bite group than in open bite group in Angle's Class II, division 1 malocclusion but there were no significant differences in Angle's Class I and Class III malocclusion. 3. There was no significant correlationship between the axial inclination of posterior teeth to each plane and overbite of anterior teeth in open bite group. 4. There was a significant correlationship between the axial inclination of upeer and lower second premolar to occlusal plane and overbite of anterior teeth in Angle's Class I, Class II, division 1 and Class III malocclusion.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.2
• /
• pp.171-183
• /
• 2001

The purpose of this study was compare the fracture strength of the IPS Empress ceramic crown according to the occlusal depth (1.5mm, 2.0mm, 2.5mm) and axial inclination ($4^{\circ},\;8^{\circ},\;12^{\circ}$) of the upper first molar. After 10 metal dies were made for each group, the IPS Empress ceramic crowns were fabricated and were cemented with resin cement. The cemented crowns mounted on the testing jig were inclined 30 degrees and a universal testing machine was used to measure the fracture strength. The results of this study were as follows: 1. The fracture strength of the ceramic crown with 2.5mm depth and $8^{\circ}$ inclination was the highest (1393N). Crowns of 1.5mm depth and $4^{\circ}$ inclination had the lowest strength (1015N) 2. There were no significant differences of the fracture strength according to occlusal depth and axial inclination. 3. Most fracture lines began at the loading area and extended through proximal surface perpendicular to the margin, irrespective of occlusal depth. 4. There was positive correlation between the fracture strength and the fracture surface area of crowns.

• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.1
• /
• pp.127-133
• /
• 1999

The purpose of this study was to compare the fracture strength of the IPS Empress ceramic crown according to the occlusal depth (1.5mm, 2.0mm, 2.5mm) and axial inclination ($4^{\circ},\;8^{\circ},\;12^{\circ}$) of the upper first premolar. After 10 metal dies were made fir each group, the IPS Empress ceramic crowns were fabricated and each crown was cemented on each metal die with resin cement. The cemented crowns mounted on the testing jig were inclined 30 degrees and a universal testing machine was used to measure the fracture strength. The results were : 1. The fracture strength of the ceramic crown with 2.5mm depth and $12^{\circ}$ inclination was the highest (630N). Crowns of 1.5mm depth and $4^{\circ}$ inclination had the lowest strength(378N). There were no significant differences of the fracture strength by axial inclination in same occlusal depth group. 2. The fracture mode of the crowns was similar. Most of fracture lines began at the loading area and extended through proximal surface perpendicular to the margin, irrespective of occlusal depth.

• Journal of Mechanical Science and Technology
• /
• v.17 no.3
• /
• pp.422-428
• /
• 2003

This study concerns the performance of the heat transfer of the thermosyphons having 60, 70, 80. 90 axial internal low-fins in which boiling and condensation occurr. Water, HCFC-141b and CFC-11 have been used as the working fluids. The operating temperature, the liquid charge ratio and the inclination angle of thermosyphons have been used as the experimental parameters. The heat flux and heat transfer coefficient at the condenser are estimated from experimental results. The experimental results have been assessed and compared with existing theories. As a result of the experimental investigation, it was found that the maximum heat flow rate in the thermosyphons is dependent upon the liquid charge ratio and inclination angle. A relatively high rate of heat transfer has been achieved by the thermosyphon with axial internal low-fins. The inclination of a thermosyphon has a notable influence on the condensation. In addition, the overall heat transfer coefficients and the characteristics at the operating temperature are obtained for the practical applications.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.6 no.1
• /
• pp.7-14
• /
• 1976

This study was done using the 45° oblique lateral old, 18 males and 27 females, with normal occlusion, premolars and molars on upper and lower jaws. Axial inclination to nasal floor, occlusal plane and inter-axial inclination were examined. In addition the position of each tooth was examined in height and depth in upper and lower jaws. The results were obtained as follows; 1. The inclination of long axis of upper 1st premolar was most nearly perpendicular, upper canine was tilted mesially, and 2nd premolar and molars were tilted distally. 2. The inclination of long axis of lowers molar were tilted mesially. 3. There were no severe variation on the inter-axial inclination of canine to mandibular plane, and 2nd molar.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.5
• /
• pp.441-450
• /
• 2002

The purpose of this study was compare the fracture strength of the IPS Empress ceramic crown according to the occlusal depth (1.5mm, 2.0mm, 2.5mm) and axial inclination ($4^{\circ},\;8^{\circ},\;12^{\circ}$) of the lower second premolar. After 10 metal dies were made for each group, the IPS Empress ceramic crowns were fabricated and cemented with resin cement. The cemented crowns were mounted on the testing jig with inclination of 30 degrees and the universal testing machine was used to measure the fracture strength. The results of this study were as follows : 1. The fracture strength of the ceramic crown with 2.5mm depth and $12^{\circ}$ inclination was the highest (1284 N). Crowns of 1.5mm depth and $8^{\circ}$ inclination had the lowest strength (951 N). 2. There were no significant differences in the fracture strength by axial inclination of the same occlusal depth group. 3. Most fracture lines began at the loading area and extended through proximal surface perpendicular to the margin, irrespective of occlusal depth.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.1
• /
• pp.48-60
• /
• 2003

The purpose of this study was to compare the fracture strength of the IPS Empress ceramic crown according to the occlusal depth (1.5mm, 2.0mm, 2.5mm) and axial inclination ($4^{\circ},\;8^{\circ},\;12^{\circ}$) of the lower First Molar. After 10 metal dies were made for each group, the IPS Empress ceramic crowns were fabricated and cemented with resin cement(Bistite resin cement, Tokuyama Soda Co. LTD., Japan). The cemented crowns were mounted on the testing jig with inclination of 30 degrees and the universal testing machine(Zwick Z020, Zwick, Germany)was used to measure the fracture strength. The results of this study were as follows : 1. The fracture strength of the ceramic crown with 2.5mm depth and $12^{\circ}$ inclination was the highest (1789 N). Crowns of 1.5mm depth and $4^{\circ}$ inclination had the lowest strength (1091 N). 2. There were no significant differences in the fracture strength by axial inclination of the same occlusal depth group. 3. Most fracture lines began at the loading area and extended through proximal surface perpendicular to the margin, irrespective of occlusal depth. Size of fragment was affected by the amount of occlusal reduction.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.1
• /
• pp.30-40
• /
• 2005

Purpose. The purpose of this study was to compare the fracture strength of the IPS Empress ceramic crown according to the incisal reduction (2.0mm, 2.5mm, 3.0mm) and axial inclination ($4^{\circ}$, $8^{\circ}$, $12^{\circ}$) of the upper canine. Material and methods. After 10 metal dies were made for each group, the IPS Empress ceramic crowns were fabricated and each crown was cemented on each metal die with resin cement. The cemented crowns mounted on the testing jig were inclined 30 degrees and the universal testing machine was used to measure the fracture strength. Results. 1. The fracture strength of the ceramic crown with 3.0mm depth and $12^{\circ}$ inclination was the highest (839N) Crowns of 2.0mm depth and $12^{\circ}$ inclination had the lowest strength (559N). 2. There was no significant difference in the fracture strength by axial inclination in the same incisal reduction group. 3. The fracture mode of the crowns was similar. Most of fracture lines began at the loading area and extended through proximal surface perpendicular to the margin irrespective of incisal reduction.

• The korean journal of orthodontics
• /
• v.34 no.6 s.107
• /
• pp.544-554
• /
• 2004

A device called incisor inclination indicator to control the axial inclinations of the incisors in the diagnostic setup is introduced. It is used to control the retraction of the maxillary and mandibular incisors. In this article, we describe the use of the incisor inclination indicator to prescribe adequate torque into the anterior lingual brackets and evaluate the results of treatment in a bimaxillary dentoalveolar protrusion case that underwent orthodontic treatment with the pretorqued anterior lingual brackets. Retraction of the maxillary and mandibular incisors was achieved with careful control of the axial inclination. It is indicated that the use of the incisor inclination indicator is an effective adjunctive laboratory procedure for anterior torque control during retraction in lingual orthodontic treatment.