• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.170-178
• /
• 2009

In order to develope a common ground system, a general procedure language that can be used in both EGSE and MCS is primarily needed. As the first step in developing a common test and integration procedure language, KARI's ATS for AIT and MCE for GS were compared to some of the most representative languages such as PLUTO regarded European standard, STOL and ELISA and PIL. Based on the analysis, design features of developing a common test and integration procedure language were presented.

• Journal of Advanced Navigation Technology
• /
• v.22 no.5
• /
• pp.359-366
• /
• 2018

In this paper, the noise is removed by using CTLS aircraft installed FBG sensor inside the aircraft wing. We suggest a normal wavelet transform scheme with motion - invariant characteristics for noise reduction. In the case of installing FBG sensors inside the composite material as in CTLS, large and small empty spaces and parts or sections are generated between the adhesive layers, and a signal splitting problem occurs. FBG sensor is not affected by noise. but eletromagnetic, light source, light detector and signal processing device are influeced by noise because these are eletronic components what affected by eletromagnetic wave. because of this, errors are occured. Experimental results show that the noise can be removed using normal wavelet transform and more accurate data detection is possible.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.21 no.1
• /
• pp.74-79
• /
• 2013

Early remotely-piloted aircraft system (RPAS) development focused on simple reconnaissance to obtain information by visual observation for military demands. Currently, various types of remotely-piloted aircraft (RPA) is being developed worldwide for applications in many different areas. As RPA avionics are combined with CNS/ATM technologies, RPA capabilities will be enhanced and the market is expected to grow rapidly. ICAO has been held the Air Navigation Commission on 14 October 2011 to discuss revising Procedures for air navigation services (PANS) and guidance material related to RPA and their associated systems. It progressed that Annex 2 and 7 will be revised and came into effect from 2012. However most of incorporate revisions are not clear yet. Because the revision articles recommend follow requirements of the state(s). Considering operations of RPA in controlled airspace and between adjacent states, the qualification and training of RPA pilot will be one of the main issues for RPA operation. In this paper, we will take a look at international and domestic trends of regulation framework in ICAO and RPA advanced country in chapter 2.1 and suggest about consideration of remote pilot qualification and training for establishing regulations of remote pilot license.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.4
• /
• pp.287-294
• /
• 2008

This paper describes an implementation of a wide-range dimming controller of a LED backlight for Avionics applications such as a control display unit(CDU) and multi-function display(MFD). The digital dimming controller employing a current controlled buck converter and light sensor feedback is proposed. The proposed system provides a wide dimming control range of from 150fL to 0.05fL(3000:1) required for avionic displays. The experimental results are provided to show the control performance.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.11
• /
• pp.1056-1060
• /
• 2010

The software running on avionic systems is required to be highly reliable and productive. Due to these demands, the standard such as ARINC 653 has been suggested, which includes the abstraction of resource partitioning and defines interfaces between avionic operating system and applications. Though there are many manned aerial vehicles employing ARINC 653 based operating systems, Linux-based ARINC 653 for unmanned aerial vehicles has not been studied yet. In this paper, we propose the design of Linux-based ARINC 653 process model and present preliminary implementation. The experiment results present that the implementation is enough to support control software of unmanned helicopter.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.4
• /
• pp.65-74
• /
• 2014

Unmanned aerial vehicles(UAVs) refer to the aircraft which carries no human pilot and is operated under remote control or in autonomous operational mode. As the UAVs can perform the dull, dangerous and difficult missions, various kinds of UAVs with different sizes and weights have been developed and operated for both civil and military application. As the avionics and communication technology related to the UAVs are matured, the demand for the UAVs is dramatically increased. Therefore, It is important to develope airworthiness process and regulations of the UAVs to minimize related risk to the man and environment. This paper describes related regulations and classification of the small UAVs for different international airworthiness authorities. The analysis of the CS-LURS verses Stanag 4702 and Stanag 4703 can provide guidelines for the generation of the airworthiness certification criteria for the small UAVs in civil sector. This paper conducted kinetic impact energy analysis of the loss of the small UAVs control scenarios and of the very small UAVs under 66 joules. Based on the analysis, the energy impact analysis can be considered before the design certification approval for the small UAVs.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.8
• /
• pp.29-35
• /
• 2019

This paper proposes a UAV equipped with an automatic control system for educational purposes such as navigation flight or autonomous flight. The proposed UAV is capable of automatic navigation flight and it is possible to control more precisely and delicately than existing UAV which is directly controlled. And it has the advantage that it is possible to fly in a place out of sight. In addition, the user may arbitrarily change the route or route information to use it as an educational purpose for achieving the special purpose. It also allows you to check flight status by shooting a video during flight. For this purpose, it is designed to check the image in real time using 5.8GHz video transmitter and receiver. The flight information is recorded separately and used as data to judge the normal flight after the flight. The result of the paper can be flighted along the coordinates specified using GPS information. Since it can receive real-time video, it is expected to be used for various education purposes such as reconnaissance of polluted area, achievement of special purpose, and so on.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.7
• /
• pp.666-673
• /
• 2011

To perform effective integration test of avionics equipments, the importance of a setup for integration test environment has been increasing in recently developed aircraft. Especially, the development of integration test equipment is necessary for minimizing the development period and reliability of integration test. This paper treats the model development for optimal working of integration test after analyzing the characteristics of each MEP equipments for Surion(KUH). Models, whose main role is troubleshooting of equipment and simulation for missing equipments, consists of dynamic, behavior, and ICD models depending on the dynamic characteristics. Software test for both unit level and system level are performed to verify the model reliability. By conducting integration test using SIL, it is confirmed that the developed models are suitable for integration function test of the MEP system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.7
• /
• pp.144-149
• /
• 2002

This paper presents a technique for real time multiprocessor parallel processing to develop an avionic system computer(ASC) which integrates the avionics control, navigation and fire control, cursive and raster graphic symbol generation into one line replaceable unit. The proposed method has optimal performance by adopting a logically asymmetric structure between four 32bit RISC processors based on the master-slave multiprocessing, a tightly coupled interaction level with the time shared common bus and global memory, and an efficient bus arbitration algorithm. The ASC has been verified through a series of flight tests. The relevant tests also have been rigorously conducted on the prototype ASC such as electrical test, environmental test, and electromagnetic interference test.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.5
• /
• pp.124-133
• /
• 2003

We propose an application of the Object-Oriented design methodology to develop operational flight program(OFP) for stores management computer(SMC) which manages and controls stores inventory, stores activation, launch for missiles, and release of the conventional weapons. For the development of SMC, a military version of PowerPC 603e is used as a central processing unit board and VxWorks real-time operating system is used. The Tornado software development environment(SDE) and the programming language Ada95 are used for OFP development. We design three layerd in the OFP for the independency of the software modules. An avionics system computer(ASC) simulator and a test bench are developed for the SMC integration test and verification test. And the tests are rigorously and successfully conducted.