• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.12
• /
• pp.1196-1203
• /
• 2014

Recently, UFRs (Unmanned Flying Robots) have begun to be utilized in various areas for civilian and military applications. Due to this increased utilization, accidents involving UFRsare also increasing. To prevent or monitor accidents caused by UFRs, high-accuracy positioning information is one of the most important technical elements. This paper proposes an efficient UFR monitoring system which provides accurate UFR positioning information with low-cost onboard elements; a small ARM module based on an embedded Linux operating system, a low-cost single frequency GPS receiver with a cheap patch antenna, and a versatile wireless network interface module. The ground monitoring system employs a dual frequency GPS receiver to generate exact UFR coordinates with cm-level accuracy. By processing the UFR measurements based on the Inverse RTK (Real Time Kinematic) method, the ground monitoring system determines the cm-level accurate coordinates of the UFR. The feasibility of the proposed UFR monitoring system was evaluated by three experiments in terms of data loss and accuracy.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.357-365
• /
• 2015

Recently, embedded systems such as aircraft and automobilie, are developed as modular architecture instead of federated architecture because of SWaP(Size, Weight and Power) issues. In addition, partition operating system that support multiple logical node based on partition concept were recently appeared. Distributed recovery block is fault tolerance design scheme that applicable to mission critical real-time system to support real-time take over via real-time synchronization between participated nodes. Because of real-time synchronization, single-core based computer is not suitable for partition based distributed recovery block design scheme. Multi-core and AMP(Asymmetric Multi-Processing) based partition architecture is required to apply distributed recovery block design scheme. In this paper, we proposed design scheme of distributed recovery block on the multi-core based supervised-AMP architecture partition operating system. This paper implements flight control simulator for avionics to check feasibility of our design scheme.

• Journal of Advanced Navigation Technology
• /
• v.27 no.2
• /
• pp.173-181
• /
• 2023

Aircraft carriers need to maintain an orderly flow of aircraft in order for military ships to conduct combat through aircraft. Maintaining aircraft flow is an important factor in strengthening ship and aviation safety. In order to maintain aircraft flow, it is essential to develop a state-of-the-art air control system that provides higher quality control information by simultaneously accommodating radar-based monitoring information and monitoring information based on CNS integrated technology. Based on this point, this study describes the function and operation method of specific control equipment for the operation of the Aviation Support System and Air Traffic Control System required to operate light aircraft carriers in Korea based on overseas cases.

• Journal of Advanced Navigation Technology
• /
• v.21 no.2
• /
• pp.163-170
• /
• 2017

MLAT which is an independent cooperative surveillance system is applied to increase the positon resoultin of secondary survelliance radar. MLAT uses the hyperboic or hyperboloid position mesurement algorithm. Central processing unit of MLAT calculates target position using time difference of arrival (TDOA) which can be solved from time of arrival (TOA) information of each receivers (at least 4 receivers). To increase position resolution of MLAT which use TDOA, TOA which is transfer time from tranmitter to receiver shold be calculated with precision time resolution in receiver. This paper explained the MLAT system briefly and explained ATD which is one of means of calcuating pulse position. ATD is applied to solve the deviation of pulse position due to different amplitude of signals in mulitiple receivers. In this paper, to analysis the performance of ATD, the simulation result of LAS and CDS was compared with the simulation result of basic threshold method.

• Journal of Navigation and Port Research
• /
• v.31 no.6
• /
• pp.523-530
• /
• 2007

Crane systems are very important in industrial fields to carry heavy objects such that many investigations about control of the systems are actively conducted for enhancing its control performance. This paper presents an adaptive control approach using the model matching for a complex 3-DOF nonlinear crane system. First, the system model is linearized through feedback linearization method and then PD control is applied in the approximated model. This linear model is considered as nominal to derive corrective control law for a perturbed crane model using Lyapunov theory. This corrective control is primitively aimed to compensate real-time control deviation due to partially known perturbation. We additionally study stability analysis of the crane control system using Lyapunov perturbation theory. Evaluation of our control approach is numerically carried out through computer simulation and its superiority is demonstrated comparing with the classical control.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.798-803
• /
• 2013

In this paper, the activities of North America to enhance the flight safety of helicopter were introduced. In North America, by 2009, 49% of worldwide civil helicopters are in operation. The development trends of North America to enhance the flight safety of helicopter are expected to have a significant impact to the other helicopter operating areas. The analysis of the case of Gulf of Mexico where large fleet of Helicopter in operations, FAA's NextGen program, and the Canadian plan to comply with the ICAO's Aviation System Block Upgrades plan shows the direction of helicopter avionic development for enhancing the flight safety of helicopter.

• Journal of Aerospace System Engineering
• /
• v.13 no.5
• /
• pp.1-8
• /
• 2019

Recently, avionics has been migrating from a federated architecture to an integrated modular architecture based on a multi-core to reduce the number of systems, weight, power consumption, and platform redundancy. The volume of data which must bo provided to the pilot through the display device has increased, because an integrated single device performs multiple functions. For this reason, the volume of data processed by the graphic processor within a fixed operation period has increased. In this paper, we provide a multi-core-based rendering engine in to perform more graphics processing within a fixed operation period. We assume the proposed method uses a multi-core-based partitioning operating system using the AMP (Asymmetric Multi-Processing) architecture.

• Journal of Aerospace System Engineering
• /
• v.13 no.6
• /
• pp.80-89
• /
• 2019

Prospecting future social environmental changes and improvement research on future technologies is required for prospecting promising technology, as it would be useful for institution·company to set up technical planning. This study aims at providing a methodology for retaining international technology competitiveness, marketable industry, and sustainable promising technology in a field of new growth engine industry such as national unmanned aerial vehicle industry. We draw a result by analysing with tools such as KrKwic, Excel, NetMiner, presenting methods of a Social Network Analysis, sub-group analysis, and cognitive map analysis based on patent data in a field of unmanned aerial vehicle industry. Therefore, this study explored the technology evolution of UAV and to prospect promising technology. As a result, some future promising technologies are prospected as what worths concentrated investment, such as 'system integration tech', 'assessment/airworthiness certification tech', 'avionics', 'pilot control tech', 'identification of friend or foe', 'flight control tech', 'supportive equipment'.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.5
• /
• pp.9-16
• /
• 2021

In this paper, we propose a building exploration drone that can be used for a digital twin-based building control system. The existing building control system using a fixed position sensor box has a problem that a management blind spot occurs. And because people patrol themselves, it takes a lot of human resources. In this paper, a drone equipped with a temperature and humidity sensor and a gas leak detection sensor is used to search the internal path of the building centering on the control blind spot. It also aims to solve the problem of the building control system by transmitting information in real time along with the video. In addition, it has a stable hovering function using an optical floor sensor and can be applied to an existing digital twin-based building control system. The results of this study are believed to be of great help in improving the quality of digital twin control systems using drones.

• Journal of Advanced Navigation Technology
• /
• v.24 no.6
• /
• pp.479-484
• /
• 2020

Foreign object debris (FOD) is a generic term for all substances that may pose a threat to aircraft operations on a runway. In the past, FOD detection and collection methods using human resources were very inefficient in terms of efficiency and economics, so it is essential to develop an unmanned FOD detection system suitable for domestic use. In this paper, the fixed FOD automatic detection system and mobile FOD automatic detection system using EO camera and radar were studied and developed at the Taean airfield of Hanseo University, and fixed and mobile method were operated to confirm that automatic FOD detection in the runway of the airfield is possible regardless of illumination and weather conditions.