• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1146-1155
• /
• 2017

Normally, the artificial intelligence algorithms are widely applied to the optimal controller design. Then, it is expected that the best output performance is achieved. Unfortunately, when resulting controller parameters are implemented by using the practical devices, the output performance cannot be the best as expected. Therefore, the paper presents the optimal controller design using the combination between the state-space averaging model and the adaptive Tabu search algorithm with the new criteria as two penalty conditions to handle the mentioned problem. The buck-boost converter regulated by the cascade PI controllers is used as the example power system. The results show that the output performance is better than those from the conventional design method for both input and load variations. Moreover, it is confirmed that the reported controllers can be implemented using the realistic devices without the limitation and the stable operation is also guaranteed. The results are also validated by the simulation using the topology model of MATLAB and also experimentally verified by the testing rig.

• Structural Engineering and Mechanics
• /
• 제15권6호
• /
• pp.669-683
• /
• 2003

The stochastic optimal nonlinear control of coupled adjacent building structures is studied based on the stochastic dynamical programming principle and the stochastic averaging method. The coupled structures with control devices under random seismic excitation are first condensed to form a reduced-order structural model for the control analysis. The stochastic averaging method is applied to the reduced model to yield stochastic differential equations for structural modal energies as controlled diffusion processes. Then a dynamical programming equation for the energy processes is established based on the stochastic dynamical programming principle, and solved to determine the optimal nonlinear control law. The seismic response mitigation of the coupled structures is achieved through the structural energy control and the dimension of the optimal control problem is reduced. The seismic excitation spectrum is taken into account according to the stochastic dynamical programming principle. Finally, the nonlinear controlled structural response is predicted by using the stochastic averaging method and compared with the uncontrolled structural response to evaluate the control efficacy. Numerical results are given to demonstrate the response mitigation capabilities of the proposed stochastic optimal control method for coupled adjacent building structures.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1430-1435
• /
• 2004

The present paper is devoted to the modeling based on an averaging approach for microchannel heat sinks. Firstly, analytic solutions for velocity and temperature distributions for low-aspect-ratio microchannel heat sinks are presented by using the averaging approach. When the aspect ratio of the microchannel is smaller than 1, analytic solutions accurately evaluate thermal resistances of heat sinks while the previous model cannot predict thermal resistances. Secondly, asymptotic solutions for velocity and temperature distributions at low-aspect-ratio limit and at high-aspect-ratio limit are presented by using the scale analysis. Asymptotic solutions are very simple, but shown to predict thermal resistances accurately.

• 지구물리와물리탐사
• /
• 제5권3호
• /
• pp.169-177
• /
• 2002

일반 반사법 탐사 모델링에서 효율적인 주파수영역 수치모델링의 실용화를 위해 무엇보다 해결해야할 과제는 파장당 격자수를 줄이는 것이다. 본 연구에서는 이에 착안하여 수치분산 및 수치이방성을 최소화시키면서 한 파장당 필요한 격자수를 줄일 수 있는 가중평균 유한요소법을 개발하였다. 강성행렬과 질량행렬은 네 개의 사각형 유한요소로 확장하였으며, 모든 격자점이 포함되도록 유한요소를 배열하여 조합하였다. 확장된 네 개의 강성행렬과 질량행렬은 가중평균계수를 주어 선형결합하는 방법으로 가중평균하였다. 가중평균계수는 확장된 25점 평균차분법을 사용하여 가중평균계수를 결정하였다. 또한, 정확도 향상은 2차원 균질모델 과 수평층 모델에서 해석해와 한 파장당 4개의 격자점을 준 가중평균 유한요소법 수치해 비교를 통하여 검증하였다. 또한, 석유탐사에서 활용성이 높은 향사구조 모델을 선정하여 이의 반응을 관찰한 결과 지층경계면외에 네 개의 사각형 유한요소들의 구성으로 인한 인위적인 파의 도달이 인식되지 않았다. 따라서, 본 연구에서 고안된 가중평균 유한요소법은 주파수영역에서 폭 넓은 수치모델링연구을 가능하게 할 것이다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.57-60
• /
• 2002

The stiffness model has been proposed to predict elastic constants of twisted yarn composites. The model is based upon the unit cell structure, the coordinate transformation, and the volume averaging of compliance constants for constituent materials. For the correlation of analytic results with experiments, composite samples of various yarn twist angle were tested. The samples were fabricated by the RTM process using glass yarns and epoxy resin. The correlations of elastic constants showed relatively good agreements. The model provides the predictions of the three-dimensional engineering constants, which are valuable input data for the analytic characterization of textile composites made of twisted yarn.

• 전자공학회논문지
• /
• 제50권12호
• /
• pp.261-269
• /
• 2013

본 연구에서는 자극에 대한 유발전위 발현시점의 변화와 유발전위에 혼입된 무작위 잡음을 시간지연현상과 자음혼입 가법모형으로 모델링 하였다. 동기시점 불일치에 따른 평균화 처리과정의 유발전위 신호의 왜곡을 개선하기 위하여 시간지연추정을 잡음제거 위너필터에 결합한 복합적 시간지연보상-잡음개선 위너필터-앙상블평균 처리기법 (DWEA: Delay compensated Wiener filtered ensemble averaging)을 적용하였다. 제시한 방법의 성능은 임의의 시간지연과 크기의 변화를 변화시킨 백색잡음 데이터를 합성한 대리모의실험을 통하여 검증하였다. 모의실험데이터에 대하여 DWEA 방법이 위너필터링앙상블평균 방법과 기존의 앙상블평균방법보다 우수 하였다. DWEA 방법은 10% MSE 오차한계에 대하여 잡음이득 7까지 동작 가능하였다. 실험결과를 통하여 DWEA 방법은 잡음의 혼입과 동기 불일치 현상을 보이는 유발전위의 신호개선의 가능성을 제시하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.177-178
• /
• 2006

Many authors issued the feature-preserving averaging technique according to positioning and scaling process using landmarks, which represent the geometric characteristics of three dimensional surface models. Such a technique should be done by manual procedure, choosing and marking the landmarks on each bone surface before averaging process. In this study, we produced another averaging technique without having to use such manual procedure, and made averaging models from three dimensional surface data that were reconstructed from computerized tomography images of Digital Korean Project. The bone models were subjected to orthogonal coordinator system. These models were transformed to coincide mass center and to align principal axis. Then, bone models were scaled according to average length data of sample bone models on all axis(x, y, z). After establishing voxellar hexahedron space which contain all sample bone models, we counted the number of overlapping for each voxel. We generated the three dimensional average surface by displaying the yokels that have more overlapping number than boundary number. The boundary number was decided when the average volume of each bone equal to the volume of bone that would be averaged. Using this technique, we can make a feature-preserving averaging volume of bones.

• 동력기계공학회지
• /
• 제4권2호
• /
• pp.40-45
• /
• 2000

Some engineering materials are often known to have considerable spatial variation in their resisting strength and other properties. The objective of this study is to investigate the averaging effect and the applicability of extremal statistic for the statistical size effect. In the present study, it is assumed that the material property is a stationary random process in space. The theoretical autocorrelation function of the material strength are discussed for several correlation lengths. And, in order to investigate the statistical size effect, the material properties was simulated by using the non-Gaussian random process method. The material properties were plotted on the Weibull probability papers. The main results are summarized as follows: The autocorrelation function of the material properties are almost independent of the averaging length. The variance decreases with increasing the averaging length. As correlation length is smaller, the slope is larger. And also, it was found that Weibull statistics based on the weakest-link model could not explain the spatial variation of material properties with respect to the size effect satisfactory.

• 동력기계공학회지
• /
• 제4권3호
• /
• pp.40-47
• /
• 2000

The turbulent flow with wake, reattachment and recirculation flow is very important from the viewpoint of engineering. But that is still difficult because of especially the unsteady problems which are related with the vehicle dynamics and the aerodynamics noise. This paper evaluate LES that can analyze about all fluid flow region including the laminar, transition and turbulent. So we compare the results of LES with those of PIV measurement and Reynolds averaging models. In conclusion, LES predicts flow behavior better than Reynolds averaging models.

• 전기학회논문지P
• /
• 제54권4호
• /
• pp.171-178
• /
• 2005

The proposed dual-output DC-DC converter that bases on flyback converter can obtain two output voltage with non-isolated main-output and isolated sub-output at the same time using single-winding high frequency transformer. It can solve problems in multi-winding converter that use one main-switch, and also control quality of isolated sub-output voltage can be improved by additional sub-switch to the second. For analysis and design of the proposed converter system, converters are classified as operation mode from switching state and are become modeling by applying state space averaging method. Steady-state characteristics and dynamic characteristics are analyzed by DC component and perturbation component from state space averaging model. From experiment converter, validity of analysis and design for the propose converter system is confirm.