• 한국주거학회논문집
• /
• 제15권1호
• /
• pp.25-32
• /
• 2004

The purpose of this study is to understand the indoor thermal environment in the earth brick wall building what is called a ecological Architecture. To investigate thermal performances of the earth brick walls, it measured indoor and outdoor air temperature, relative humidity, globe temperature and PMV in reference house. The result of this study were summarized as the followings; 1) When the outdoor average air temperature was $21.8^{\circ}$, livingroom was $24.9^{\circ}$, kitchen was $25.1^{\circ}$ and 2nd floor room was $25.6^{\circ}$ at 150 cm height from the floor. 2) Although the average outdoor relative humidity was 78%, the livingroom was 67.5%. 3) As the air temperature difference between at the top and bottom was $0.6^{\circ}$ in living room, this value was below 1 % of PPD by ASHRAE Handbook. 4) Predicted Mean Vote(PMV) by ISO-7730 was +0.41.

• KIEAE Journal
• /
• 제10권6호
• /
• pp.67-72
• /
• 2010

This study was conducted to examine the change of heating environment with the creation of an indoor water space. Living environments and comfort of dwellers can be improved by utilizing the physical properties of water effectively. This study focuses on the basic examination of the effect of water space and the environmental effects of water space by experiment. Two identical models were fabricated to compare the changes in indoor temperature and humidity with and without a water space. With the water space, temperature was reduced by an average of $0.55^{\circ}C$ a day and moisture content increased by an average of 4%. As a result, it was possible to obtain quantitative data on water space's temperature reduction and humidity control capacities. This study is expected to provide basic information for further studies on the effect of water spaces in various buildings.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.304-307
• /
• 1999

The Mg($_{1-x}$ )S $r_{x}$Ti $O_3$(x=0.1,0.2,0.3) ceramics were prepared by the conventional mixed oxide method. The structural properties were investigated with calcining temperature and composition ratio by XRD and DT-TGA. Increasing the calcining temperature from 80$0^{\circ}C$ to 100$0^{\circ}C$, second phase was decreased and average particle size was increased. The SrTi $O_3$ ceramics of calcined at 100$0^{\circ}C$ had a structure of polycrystalline perovskite without the secondary phases. The average particle size of the $Mg_{0.9}$S $r_{0.1}$Ti $O_3$ ceramics calcined at 100$0^{\circ}C$ were 0.67${\mu}{\textrm}{m}$..>......

• 한국세라믹학회지
• /
• 제56권1호
• /
• pp.84-90
• /
• 2019

The varistor properties and stability against dc-accelerated stress of $V_2O_5-Mn_3O_4-Co_3O_4-Dy_2O_3-Nb_2O_5-Bi_2O_3$ (VMCDNB)-doped zinc oxide ceramics sintered at $850-925^{\circ}C$ were investigated. Increasing the sintering temperature increased the average grain size from 4.6 to 8.7 mm and decreased the density of the sintered pellet density from 5.54 to $5.42g/cm^3$. The breakdown field decreased from 5919 to 1465 V/cm because of the increase in the average grain size. Zinc oxide ceramics sintered at $875^{\circ}C$ showed the highest nonlinear coefficient (43.6) and the highest potential barrier height (0.96 eV). Zinc oxide ceramics sintered at $850^{\circ}C$ showed the highest stability: the variation rate of the breakdown field was -2.0% and the variation rate of the nonlinear coefficient was -23.3%, after application of the specified stress (applied voltage/temperature/time).

• 한국가시화정보학회지
• /
• 제20권3호
• /
• pp.58-66
• /
• 2022

The high heat emitted from the process module and heat jacket may cause errors in semiconductor process equipment. Barriers were designed to reduce the temperature of surface on transfer module. A designed barrier was compared and analyzed by numerical analysis using ANSYS Fluent. The average temperature of barrier and effect of radiation heat transfer were also compared through absorbed radiative heat flux of the barrier. The adoption of the barrier had an effect on the radiative heat transfer reduction of the transfer module rod. The effect of the angles of barrier from 50° to 90° on the heat transfer was investigated using the absorbed radiative heat flux with the average temperature. The angle of barrier of 50° reduced the temperature up to 9.6 %.

• 환경영향평가
• /
• 제12권4호
• /
• pp.271-279
• /
• 2003

Temperature and humidity forecasting have been performed using artificial neural networks model(ANN). We composed ANN with multi-layer perceptron which is 2 input layers, 2 hidden layers and 1 output layer. Back propagation algorithm was used to train the ANN. 6 nodes and 12 nodes in the middle layers were appropriate to the temperature model for training. And 9 nodes and 6 nodes were also appropriate to the humidity model respectively. 90% of the all data was used learning set, and the extra 10% was used to model verification. In the case of temperature, average temperature before 15 minute and humidity at present constituted input layer, and temperature at present constituted out-layer and humidity model was vice versa. The sensitivity analysis revealed that previous value data contributed to forecasting target value than the other variable. Temperature was pseudo-linearly related to the previous 15 minute average value. We confirmed that ANN with multi-layer perceptron could support pollutant dispersion model by computing meterological data at real time.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권2호
• /
• pp.279-282
• /
• 2002

Twenty six male Hanwoo (Korean cattle) carcasses were measured for pH, temperature and instrumental color changes of loins during 24 h post-mortem carcass chilling at $4^{\circ}C$ in the cooler. The average internal temperature of loins was about $5^{\circ}C$ after 24 h of chilling, and with the exclusion of those with an ultimate pH>6.0 (dark-cutters), the average pH value was 5.5. When all carcasses were considered for the partial correlation coefficient between color and pH, with the temperature effect excluded, CIE $L^*$, $a^*$ and $b^*$ seemed to be affected significantly by pH during chilling process (p<0.001). However, when carcasses with dark-cutting condition were excluded, the correlation coefficients were much lower. In contrast, when the partial correlation coefficients between color and temperature, excluding the effect of pH on them, were analyzed, the relationship between color and temperature did not change much after values of DFD (dark, firm, dry) beef were excluded. The results suggested that the known interrelationship of color and pH in chilled beef loins be mainly due to the influence of temperature on pH and color.

• 한국기계가공학회지
• /
• 제21권6호
• /
• pp.44-49
• /
• 2022

The improvement in the battery performance and life using a battery thermal management system directly affects the improvement in the performance, life, and energy efficiency of electric vehicles. Therefore, this study numerically analyzed the heat exchange processes between the coolant inside the cooling plate channel and the heat generated by the battery. The cooling performance was analyzed based on the average temperature, temperature uniformity, and the maximum and minimum temperature differences of the battery. A performance difference existed depending on the coolant inlet temperature but showed the same tendency of cooling performance according to the shape of each plate's channel. Type 1 showed the best results in terms of battery temperature uniformity, which is the most important measure of battery performance; Type 2 showed the best results in terms of the average temperature of the battery; and Type 3 showed the best results in terms of the maximum and minimum temperature differences of the battery compared with that of the other cooling plates.

• 한국농공학회지
• /
• 제39권4호
• /
• pp.55-63
• /
• 1997

Constructed wetland system which can be applied to the rural wastewater treatment system was examined by pilot plant in Kon-Kuk University. Hydraulic loading rate of wastewater was about 0.16m$^3$/m$^2$. day and theoretical detention time in the system was 1.38 days. The effluent of the septic tank for the school building was applied as inflow to the system. The influent concentration of DO was zero but effluent was up to 4.37mg/${\ell}$ which implies that oxygen was supplied enough from atmosphere by reaeration to support biological activity of the system. Average influent concentration of BOD was 104mg/${\ell}$ and effluent was 24mg/${\ell}$ with average removal rate of 76%. Average influent concentration of COD was 215mg/${\ell}$ and effluent was 63mg/${\ell}$ with average removal rate of 70 % . Average influent concentration of SS was 78mg/${\ell}$ and effluent was 10mg/${\ell}$ with average removal rate of 87%. Two components, BOD and SS, are regulated by law to keep maximum water quality standard of 80mg/${\ell}$ when daily outflow rate is less than 100$m^3$/day which is the case of most rural communities. Therefore, the results from the experiment showed that constructed wetland system can meet the water quality standard easily. Average influent concentration of total nitrogen was 165mg/lwhich is relatively higher than normal wastewater, and effluent was about 156mg/${\ell}$ with average removal rate of only 6%. Average influent concentration of total phosphorus was 41 mg/${\ell}$ and effluent was 6mg/${\ell}$ with average removal rate of 87%. Overall, constructed wetland system was thought to be effective to treat wastewater if nitrogen removal mechanism is improved. Considering low cost, less maintenance, and high treatability, this system can be a practical alternative for the wastewater treatment in rural area The experiment was performed during the summer and fall season, and treatment efficiency of the system is expected to decrease in low temperature. therefore, further study including temperature is required to evaluate feasibility of the system more in detail.

• 한국농림기상학회지
• /
• 제19권4호
• /
• pp.252-269
• /
• 2017

본 시험은 품종별 개화가 가능한 기준온도와 저온($5.0^{\circ}C$) 누적시간 및 발아 후 변온에 따른 평균 개화소요일수를 구명하여 국내 주요 사과품종('후지', '쓰가루')들과 국내에서 육성한 품종('추광', '감홍', '홍안', '홍금', '홍로', '홍소', '화홍', '섬머드림', '선홍')들의 개화기를 예측하고자 군위지역에서 4년(2009-2012년)동안 조사하였다. 또한, 이들 자료를 이용하여 군위 지역 기온이 현재보다 $5.0^{\circ}C$ 상승되었을 때의 개화시기를 추정하였다. 저온($5.0^{\circ}C$) 누적시간(저온요구도)의 처리 범위는 0~1,671hr 정도였고, 저온 처리 후 개화를 위한 고온(고온요구도) 처리 범위는 $5.0{\sim}29.0^{\circ}C$ 정도였다. 발아 후 변온 처리구들은 항온구(대조구), $5.0{\sim}10.0^{\circ}C$ 상승구 및 하강구로 분류하였다. 결과를 살펴보면, 저온에서의 누적시간이 짧을수록 개화소요일수가 길어지는 경향이 있었으며, 0hr 처리구의 발아 후 개화까지의 소요된 일수는 1,335~1,503hr 처리구보다 2~4주 정도 길었다. 품종 별로는 모든 품종이 발아 후 기온이 $10.0^{\circ}C$ 미만일 때 개화를 하지 못하였고, 저온요구도가 낮은 품종일수록 개화에 필요한 고온요구도가 낮았다. 발아 후 기온을 $15.0^{\circ}C$로 조절된 처리구들의 개화소요일수는 $10.0^{\circ}C$ 처리구들보다 1~3주 정도 빨랐다. 발아 후 변온 처리에서는 발아 후 기온 상승 처리구들의 발아 후 개화까지 소요된 일수가 항온 처리구보다 짧았다. 이상의 결과를 종합해보면, 국내 주요 사과품종들의 개화 기준온도는 $10.0^{\circ}C$로 생각되었으며, 군위지역의 기온이 지금보다 $5.0^{\circ}C$ 정도 상승된다고 가정하면, 개화기는 1주 정도 지연될 것으로 예측되었다.