• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1686-1693
• /
• 2014

In this paper, oil-paper samples composed of transformer windings were used to investigate the insulation degradation process subjected to partial discharge (PD), with artificial defects inside to simulate the PD induced insulation degradation. To determine appropriate test voltages, the breakdown time obtained through a group of accelerated electrical degradation tests under high voltages was firstly fitted by two-parameter Weibull model to acquire the average breakdown time, which was then applied to establish the inverse power law life model to choose advisable test voltages. During the electrical degradation process, PD signals were synchronously detected by an ultra-high frequency (UHF) sensor from inception to breakdown. For PD analysis, the whole degradation process was divided into ten stages, and chaos theory was introduced to analyze the variation of three chaotic parameters with the development of electrical degradation, namely the largest Lyapunov exponent, correlation dimension and Komogorov entropy of PD amplitude time series. It is shown that deterministic chaos of PD is confirmed during the oil-paper degradation process, and the obtained results provide a new effective tool for the diagnosis of degradation of oil-paper insulation subjected to PD.

• Journal of Magnetics
• /
• v.16 no.4
• /
• pp.408-412
• /
• 2011

We investigated theoretically the magnetic field dependence of the quantum optical transition of qusi 2-Dimensional Landau splitting system, in GaN and ZnO. We apply the Quantum Transport theory (QTR) to the system in the confinement of electrons by square well confinement potential. We use the projected Liouville equation method with Equilibrium Average Projection Scheme (EAPS). Through the analysis of this work, we found the increasing properties of the optical Quantum Transition Line Shapes(QTLSs) which show the absorption power and the Quantum Transition Line Widths(QTLWs) with the magnetic-field in GaN and ZnO. We also found that QTLW, ${\gamma}(B)_{total}$ of GaN < ${\gamma}(B)_{total}$ of ZnO in the magnetic field region B < 25 Tesla.

• Journal of the Korean Magnetic Resonance Society
• /
• v.24 no.1
• /
• pp.16-22
• /
• 2020

Based on quantum transport theory, we investigated theoretically the magnetic field dependence of the quantum optical transition of quasi 2-dimensional Landau splitting system, in CdS and ZnO Through the analysis of the current work, we found the increasing properties of the cyclotron resonance line-profiles (CRLPs) which show the absorption power and the cyclotron resonance line-widths (CRLWs) with the magnetic field in CdS and ZnO We also found that that CRLWs, γ_total(B) of CdS < γ_total(B) of ZnO in the magnetic field region B < 15 Tesla.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.1
• /
• pp.125-129
• /
• 1999

The Little's formula, $L={\lambda}W$, expresses a fundamental principle of queueing theory: Under very general conditions, the average queue length is equal to the product of the arrival rate and the average waiting time. This useful formula is now well known and frequently applied. In this paper, we demonstrate that the Little's formula has much more power than was previously realized when it is properly decomposed into what we call the microscopic Little's formula. We use the M/G/1 queue with server vacations as an example model to which we apply the microscopic Little's formula. As a result, we obtain a transform-free expression for the queue length distribution. Also, we briefly summarize some previous efforts in the literature to increase the power of the Little's formula.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.1
• /
• pp.70-78
• /
• 1995

In order to implement broadband RAM's(Radar Absorbing Materials) made up of multiple dielectricl layers, the design variables such as the dielectrci constaints, the depths and the loss tangents of dielectric are optimized. The wave impedances regarding the reflective wave are found in dielectrics, input impedances and reflection coefficients with multiple dielectric layers are derived from the transmission line circuit theory. Finally, minimum average reflective power and optimum design variables are obtained by applying the numerical technique, called modified Powell method. In case of four dielectric layers with inequality constraints in design variables, a quite favourable and feasible result with the total depth of 1.1 cm, the average reflective power of 0.85% over the bradband frequency range is obtained for a specific example.

• Ocean Systems Engineering
• /
• v.8 no.4
• /
• pp.361-380
• /
• 2018

The dynamic performance of the wave energy converter (WEC) rotor with different geometric parameters such as depth of submergence and beak angle has been assessed by considering the linear potential flow theory using WAMIT solver and along with the computational fluid dynamics (CFD). The effect of viscous damping is incorporated by conducting numerical free decay test using CFD. The hydrodynamic coefficients obtained from the WAMIT, viscous damping from the CFD and estimated PTO damping are used to solve the equation of motion to obtain the final pitch response, mean optimal power and capture width. The viscous damping is almost 0.9 to 4.6 times when compared to the actual damping. It is observed that by neglecting the viscous damping the pitch response and power are overestimated when compared to the without viscous damping. The performance of the pitch WEC rotor in the Jeju western coast at the Chagwido is analyzed using Joint North Sea Wave Project (JONSWAP) spectrum and square-root of average extracted power is obtained. The performance of WEC rotor with depth of submergence 2.8 m and beak angle $60^{\circ}$ found to be good compared to the other rotors.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.292-295
• /
• 2003

Conventional methods in time / frequency domain for evaluating the compensation performance of active power filters are not provided easy solutions. So, the authors have previously proposed 3-D current coordinates which is composed into active component, fundamental reactive component and distorted component of nonlinear loads current. This method has excellent performance, but can not evaluate the characteristics of nonlinear load current whether it is inductive or capacitive. Therefore, To overcome problems mentioned previously, this paper deals with the simple Average power theory and the expanded 3-D current coordinates for evaluating the compensation performance of active power filters. To confirm the validity, active power filters simulator is developed using C-language. From the simulation, results are discuss their utility.

• The Journal of Korean Physical Therapy
• /
• v.23 no.6
• /
• pp.1-7
• /
• 2011

Purpose: The purpose of this study was to investigate the effect of movement training based on motor control theory on pain and average power of muscles in patients with shoulder impingement syndrome and to develop more effective training methods. Methods: We studied 35 patients with shoulder impingement syndrome. Patients were randomly assigned to an experimental group or a control group according to the intervention. The therapeutic modalities such as superficial heat, deep heat, and electronic stimulus, and motor control training with strengthening exercises were applied to the experimental group and therapeutic modalities only were applied to the control group. All interventions were done 3 times a week for 4 weeks. Before the intervention and again after the 4 weeks, we measured pain utilizing a visual analog scale. We measured average power using isokinetic equipment. Results: After application of the intervention, pain significantly decreased in both the experimental group and the control group. There was a significant difference between the extent of the decrease between experimental and control groups. After the intervention, the average power between the two groups were significant at an angle of $60^{\circ}$/sec and $180^{\circ}$/sec for external rotator and internal rotator muscles. They also showed significant improvement in all variables post-intervention compared to pre-intervention. Conclusion: This study indicates that there is an effect in giving appropriate motor control training to patients with shoulder impingement syndrome. It is assumed that there will be a need for more surveys on various variables for motor control training from now on.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.9
• /
• pp.3008-3028
• /
• 2022

In this paper, we investigate traffic scheduling for a delay-sensitive multi-hop relay network, and aim to minimize the priority-based end-to-end delay of different data packet via joint relay selection, subcarrier assignment, and power allocation. We first derive the priority-based end-to-end delay based on queueing theory, and then propose a two-step method to decompose the original optimization problem into two sub-problems. For the joint subcarrier assignment and power control problem, we utilize an efficient particle swarm optimization method to solve it. For the relay selection problem, we prove its convexity and use the standard Lagrange method to deal with it. The joint relay selection, subcarriers assignment and transmission power allocation problem for each hop can also be solved by an exhaustive search over a finite set defined by the relay sensor set and available subcarrier set. Simulation results show that both the proposed routing scheme and the resource allocation scheme can reduce the average end-to-end delay.

• Transactions of Materials Processing
• /
• v.4 no.1
• /
• pp.59-69
• /
• 1995

A simple kinematically admissible velocity field is proposed to determine the final-stage extrusion load and the average extruded length in the square-die forward extrusion of regular polygonal-shaped bars from circular billets. From the proposed velocity field, the upper-bound extrusion load and the average extruded length are determined by minimizing the total power consumption with respect to four parameters. Experiments have been carried out with hard solder billets at room temperature. The theoretical predictions of the extrusion load are in good agreements with the experimental results and there is generally reason able agreement in average extruded length between theory and experiment.