• Korean Journal of Veterinary Service
• /
• v.31 no.3
• /
• pp.385-395
• /
• 2008

This study was carried out to investigate the residue level of fluoroquinolones in hen's general eggs and specific eggs by microbiological assay method and high performance liquid chromatography (HPLC) method. HPLC separation was carried out by reversed phase chromatography on a Symmetry $C_{18}$ (250${\times}$4.6 mm, $5{\mu}m$ particle size) with a phase composed of distilled water (containing 0.4% triethylamine and phosphoric acid) : Methanol (780 : 220, v/v), pumped isocratically at a flow rate of 1.0ml/min. A fluorescence detector was utilized with an excitation wavelength of 278nm and an emission wavelength of 456nm. The calibration curves were linear $({\gamma}^2{\geq}0.999)$ over a concentration range of $0.025{\sim}0.4{\mu}g/ml$. Average recoveries of the five fluoroquinolones in whole eggs at fortified levels of $0.05{\sim}0.2{\mu}g/g$ were ranged mean $78.1{\sim}91.7%$ and low coefficient of variation was less than 10% for all analysed samples. The limits of detection and limits of quantification for whole eggs were $1.2{\sim}6.0ng/g$ and $2.3{\sim}9.1ng/g$, respectively. Only one hen's general eggfrom chicken farm in Incheon was detected with the residual fluoroquinolones (Microbiological assay method; 1 of 47 general eggs) ; the range of residual concentration enrofloxacin was 0.12ppm. Those in food stores were detected with the residual fluoroquinolones (Microbiological assay method; 4 of 88 general eggs) ; the ranges of residual concentration enrofloxacin were $0.15{\sim}2.2 ppm$, ciprofloxacin $0.01{\sim}0.06ppm$, and hen's specific eggs (40) in food stores were not detected. For the microbiological assay method of fluoroquinolones in hen's eggs, as the results of comparative analysis, the disc diffusion method with E coli may be a little highly detected for the residual fluoroquinolones.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.4
• /
• pp.347-354
• /
• 2016

This study was conducted to investigate the physical and chemical properties of soils in Saemangeum reclaimed lands. The investigated areas were total 5,020 ha which included 220 ha for Agricultural Life site, 2,450 ha for Tourism & Leisure site, 1,130 ha for Industrial & Research site, 820 ha for Bioenergy crop production site, and 400 ha for Rural City site. Soil samples consisting of the upper 20 cm from the surface were collected in every $200m{\times}500m$ of the each site in March and September, 2015. Particle size distribution of soils in the reclaimed land was 83.2% sand, 8.6% silt and 8.2% clay in average. Soil texture was distributed as 40.8% sandy soil, 35.5% loamy sand, and 19.7% sandy loam. Based on the investigation of soil chemical properties conducted in March, 2015, soil pH, electrical conductivity of a saturated soil paste extract (ECe), and exchangeable (Exch.) $K^+$ and $Mg^{2+}$ concentrations were higher than those of the optimum levels for upland soil, whereas soil organic matter content, available (Avail.) phosphate concentration, and Exch. $Ca^{2+}$ concentration were lower than those of the optimum ranges. Depending on the results of the soil chemical properties measured in September, 2015, soil pH, ECe, and Exch. $K^+$ concentration were higher than those of the optimum levels, but soil organic matter, Avail. phosphate, and Exch. $Ca^{2+}$ concentration were lower than the optimum ranges. In addition, distribution of sodic soil ranged between 41.4% and 50.0%, and saline soils were from 16.4 to 31.8%. Soils with pH values above 7.0 increased from 15.3% in March to 35.2% in September. Soils with ECe values over $4.8dS\;m^{-1}$ increased from 45.6% to 50.7%, whereas soils with the values below $2.0dS\;m^{-1}$ decreased from 42.8% to 36.9%.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.356-368
• /
• 2008

The effects of cosurfactant on silica nanoparticles were investigated in systems containing surfactant, oil and aqueous ammonia solution where nanoparticles were prepared using a single phase water-in-oil (W/O) microemulsion. For the same oil phase, a single phase region was dependent on the interaction between surfactant and oil. For the cyclohexane system, NP-5 surfactant showed a wider single phase region than NP-4. The addition of n-propanol as a cosurfactant resulted in an increase or a decrease of a single phase W/O microemulsion region depending on the continuous oil phase. For both cyclohexane and isooctane systems, the addition of n-propanol resulted in a decrease in the single phase region. On the other hand, for n-heptane system, the addition of n-propanol expanded a single phase W/O microemulsion region. Silica nanoparticles prepared within a single phase region showed that relatively large number of particles of irregular shape were obtained with the addition of n-propanol to NP surfactant system. The addition of n-propanol to LA-5 surfactant and n-heptane system produced a decrease in average particle size and an increase in the number of particles formed due to a decrease in the intermicellar exchange rate among microemulsion droplets.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.410-416
• /
• 2004

In this study, we fabricated magnetite coated on a cordierite honeycomb which has complex shape by ultrasound-enhanced ferrite plating. The effects of the plating condition on the formation of the magnetite and its microstructure were investigated. The magnetite coated on the honeycomb became an oxygen-deficient ferrite by H$_2$ gas reduction, then the effects of the molar concentrations of ammonium acetate for $CO_2$ gas decomposition have been studied. As the molar concentration of a pH buffer($CH_3$COONH$_4$, 0.1946∼0.3892 M) solution increased, the average particle size increased about 200∼250 nm. The magnetite coated on the honeycomb was reduced by H$_2$ gas for 2 h at 30$0^{\circ}C$. The inner pressure change in the cell began to occur at 315∼34$0^{\circ}C$. The H$_2$-Reduced magnetite coated on the honeycomb at 35$0^{\circ}C$ contained an oxygen deficient magnetite and $\alpha$-Fe phase. The thermogravimetric analysis with H$_2$ reduction and $CO_2$ decomposition were carried out with the magnetite coated on the honeycomb. A weight loss in process of H$_2$ reduction occurred between 32$0^{\circ}C$ and 34$0^{\circ}C$, while a weight gain was observed during the $CO_2$ decomposition.

• Polymer(Korea)
• /
• v.28 no.2
• /
• pp.162-169
• /
• 2004

Poly[styrene-b-(ethylene-1-butene)-b-styrene] triblock copolymer (SEBS) was functionalized with 0 to 3.0 phr maleic anhydride and the amount of dicumyl peroxide used as an initiator was varied from 0 to 0.3phr. The gel content of the modified SEBS was determined by xylene extraction and poly(oxymethylene) was blended with the modified SEBS. The impact, tensile, flexural strength and morphologies of the blends were investigated. The Izod impact strength of poly(oxymethylene) was improved through its blending with modified SEBS. However, the Izod impact strength of poly(oxymethylene)/modified SEBS blend decreased above 5% modified SEBS content. Regarding the effect of dicumyl peroxide content on the Izod impact strength, the blend had a maximum Izod impact strength when poly(oxymethylene) was blended with modified SEBS prepared with 0.1 phr dicumyl peroxide. It was also confirmed by SEM micrographs that the average particle size of modified SEBS in poly(oxymethylene)/modified SEBS blends was smaller than that of SEBS in poly(oxymethylene)/SEBS blends.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.2 no.2
• /
• pp.39-51
• /
• 1994

When broiler litter was composted under the control of peak temperature of piles(uncontrolled, controled below $70^{\circ}C$ and below $60^{\circ}C$), changes of physical and chemical parameters were determined throughout the processing period. Broiler litter was composted in each of three $1.0{\times}1.0{\times}1.2m$ dimensional facilities for 8 weeks. After 5 to 6 weeks of composting, broiler litter was converted into the final compost with no ammonia odour, rice hull size of particle, and faint brown color. Central temperature of piles reached to the peak(about $69{\sim}70^{\circ}C$) within 3 to 4 days after composting and gradually decreased thereafter. The final product contained 26.5% of moisture, 9.0~9.1 of pH, and 14.0~14.3 of C/N ratio. The increase of C/N ratio with processing resulted from the considerable loss of N. The total wet weight of the final composts was an average of 38.3% of the initial weight, the dry weight of those 64.1%, and the organic matter weight of those 34.8%. Treatments of central temperature of composts did not affect changes of moisture, pH, C/N ratio, total wet weight, total dry weight, and total organic matter weight. In general, composted broiler litter was converted into the final product with little change in physical and chemical parameters after 5 to 6 weeks of processing. Nitrogen losses during the composting should be prevented for the improvement of the composting efficiency of broiler litter.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.2 no.1
• /
• pp.31-41
• /
• 1997

This study was carried out to investigate the composition and the distribution of the benthic community in the coastal area of Inchon seasonally from May 1994 to February 1995, and to estimate the environmental factors that effect the temporal and the spatial changes of benthic species composition. In the present study, 231 species were collected with the average density of 455 ind./$m^2$. The dominant species were Heteromastus sp., Sternaspis scutata, Chaetozone setosa, Mediomastus sp., Glycinde sp., Glycera sp. and Nephtys oligobranchia, which are in the polychaete group; abundance of these species showed seasonal and spatial variations. The study area was divided into 4 regions by cluster analysis such as outside area of Palmido (I), main channel region and adjacent are of Shihwa sea wall (II), north-eastern area of Youngjongdo (III), and the Inchon harbor and the mouth area of Sorae harbor (IV). The particle size of sediment which generally influences the distribution of the benthic community, the differences of the concentration of heavy metals, and of the dissolved oxygen, the increase of the proportion of polychaetes and molluscs, the absence of the crustacean phoxocephalids, and the increase of the abundance of pollution indicator species, indicated that the environment of the areas have been degrading gradually from Group I to Group IV.

• Journal of the Korean Vacuum Society
• /
• v.22 no.2
• /
• pp.66-78
• /
• 2013

In order to develop of 80 kW RF plasma torch system, we achieved three-dimensional simulations for the extraction of more information as temperature in torch and fluid behavior analysis, etc. The position of powder injection tube, the plasma discharge characteristics with various input current and various length of ceramic tube, and the plasma temperature characteristics with process gas flow rate such those was simulated. RF thermal plasma torch designed by simulation was manufactured that was measured to the maximum of 89.3 kW power. The mass production using developed 80 kW RF thermal plasma torch system were investigated by characteristics manufactured of Si nano powder. The mass-production level of Si nano-powder was average of 539 g/hr and high yield rate of 71.6%, respectively. The particle size distribution $D_{99}/D_{50}$ of manufacturing nano-powder was investigated to 1.98 as a good uniform.

• Korean Journal of Agricultural Science
• /
• v.22 no.2
• /
• pp.151-155
• /
• 1995

Two types of modified celluloses which contain trinitrophenyl groups as chromophore were synthesized from carboxymethyl cellulose Whatman CM 70 and CM 32. Diaminoethyl groups were added to the CM 70 and CM 32 to make DAE-CM celluloses and then the DAE-CM groups were substituted by 2,4,6-trinitrophenyl groups to produce TNP-celluloses. Average particle size of the TNP-cellulose from CM 32 was $44.6{\pm}9.6{\mu}m$ in diameter and $127.9{\pm}22.5{\mu}m$ in length, which was much smaller than those from CM 70, however its TNP-moiety per gram determined by using the molar extinction coefficient $1.33{\times}10^4$ of ${\varepsilon}$-TNP-lysine at 345 nm, was 0.68 millimoles, which was 5.6-fold greater than those from CM 70. The absorption spectrum of TNP-oligosaccharides which were the soluble products of TNP-celluloses by a cellulase preparation Onozuka R-10, showed a maximal peak at 344 nm. Increases in the absorbance during hydrolysis were linear with the enzyme concentration, and the differences of slope values between two types of TNP-celluloses that the more semsitive assay could be achieved by using those from CM 32 as substrate at the low range of the enzyme concentration.

• Korean Journal of Materials Research
• /
• v.19 no.3
• /
• pp.163-168
• /
• 2009

$Eu^{3+}$-doped $Y_2O_3$ red phosphor was synthesized in a flux method using the chemicals $Y_2O_3,\;Eu_2O_3,\;H_3BO_3$ and $BaCl_2{\cdot}2H_2O$. The effect of a flux addition on the preparation of $Y_2O_3:Eu_{3+}$ red phosphor used as a cold cathode fluorescence lamp was investigated. $H_3BO_3$ and $BaCl_2{\cdot}2H_2O$ fluxes were used due to their different melting points. The crystallinity, thermal properties, morphology, and emission characteristics were measured using XRD, TG-DTA, SEM, and a photo-excited spectrometer. Under UV excitation of 254 nm, $Eu_2O_3$ 3.7 mol% doped $Y_2O_3$ exhibited a strong narrow-band red emission, peaking at 612 nm. From this result, the phosphor synthesized by firing $Y_2O_3$ with 3.7 mol% of $Eu_2O_3$, 0.25 mol% of $H_3BO_3$ and 0.5 mol% of $BaCl_2{\cdot}2H_2O$ fluxes at $1400^{\circ}C$ for 2 hours had a larger particle size of $4{\mu}m$ on average compared to the phosphor of the $H_3BO_3$ flux alone. In addition, a phosphor synthesized by the two fluxes together had a rounder corner shape, which led to the maximum emission intensity.