• 대한화학회지
• /
• 제6권1호
• /
• pp.88-93
• /
• 1962

The telomerization of vinyl acetate with carbon tetrachloride, chloroform and monochlorobenzene were investigated with respect to the synthesis of those telomers, properties and molecular weights of the formed telomers, and reaction mechanisms. Vinyl acetate reacted with carbon tetrachloride and chloroform to form telomers at 70-90$^{\circ}C$ and 60-70$^{\circ}C$, respectively and it formed polymer with monochlorobenzene. As a chain transfer agent, carbon tetrachloride was more effective than chloroform. In the telomerization of vinyl acetate and carbon tetrachloride: 1) The average molecular weight of the telomer decreased as the mole ratio of carbon tetrachloride to vinyl acetate increased. The optimum conditions for the highest yield of the telomer were as follows: Mole ratio of carbon tetrachloride to vinyl acetate : 2.5 Reaction time : 20 hours. 2) As the reaction proceeded, the refractive index and average molecular weight of the telomer increased rapidly in the first 10 hours but the increase was slow through the next 10 hours, so that, the average recurring number(n) of taxogen in the final product reached an almost definite value, i.e., 3. The telomer formed in the telomerization of vinyl acetate with carbon tetrachloride and chloroform turned to brown color in the air due to decomposition or polymerization. The suggested telomerization mechanism was supported by the hexachloroethane detected in the course of reaction.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2005년도 생물공학의 동향(XVII)
• /
• pp.358-362
• /
• 2005

High molecular weight dextran (39% alcohol, v/v), less soluble dextran, eluted from this column between T 500 and T 2000, a commercial linear dextran, Soluble dextran (45% alcohol, v/v) eluted at between T 70 and T 150 dextran. The molecular weight average of total dextran (50% alcohol, v/v) was between 150,000 to 500,000. A few oligosaccharides were detected from hydrolyzates of less soluble dextran. The hydrolyzates of soluble dextran were a family of DP 1 to 6 isomaltooligosaccharides. Compounds greater than DP 4 were branched isomaltooligosaacharides.

• Bulletin of the Korean Chemical Society
• /
• 제35권10호
• /
• pp.3001-3004
• /
• 2014

A series of hydroxyl-derivatized quaternized polymers were successfully synthesized by atom transfer radical polymerization (ATRP) and Cu(I)-catalyzed 1,3-dipolar cycloaddition of azide and alkynes (click chemistry), followed by quaternization reactions. ATRP was employed to synthesize poly(2-hydroxyethyl methacrylate) (PHEMA), followed by introduction of alkyne groups using pentynoic acid, leading to HEMA-Alkyne. 2-Azido-1-ethanol and 3-azido-1-propanol were combined with the HEMA-Alkyne backbone via click reaction, resulting in triazole-ring containing hydroxyl-derivatized polymers. Quaternization reactions with methyl iodide were conducted on the triazole ring of each polymer. Molecular weight, molecular weight distribution, and the degree of quaternization (DQ) were determined by gel permeation chromatography (GPC) and $^1H$ NMR spectroscopy. The average molecular weight ($M_n$) of the resulting polymers ranged from $5.9{\times}10^4$ to $1.05{\times}10^5g/mol$ depending on the molecular architecture. The molecular weight distribution was low ($M_w/M_n$ = 1.26-1.38). The transmission spectra of the 0.1 wt % aqueous solutions of the resulting quaternized polymers at 650 nm were measured as a function of temperature. Results showed that the upper critical solution temperature (UCST) could be finely controlled by the level of DQ.

• Fibers and Polymers
• /
• 제5권2호
• /
• pp.89-94
• /
• 2004

N-Vinylcarbazole (VCZ) was solution-polymerized in tetrahydrofuran (THF) at 25, 35, and $45^{\circ}C$ using a room temperature initiator, 2,2'-azobis(2,4-dimethylvaleronitrile) (ADMVN); the effects of amount of solvent, polymerization temperature, and initiator concentration were investigated. On the whole, the experimental results corresponded to predicted ones. Room polymerization temperature using ADMVN proved to be successful in obtaining poly(N-vinylcarbazole) (PVCZ) of high molecular weight with small temperature rise during polymerization, nevertheless of free radical polymerization by azoinitiator. The polymerization rate of VCZ in THF was proportional to the 0.47 power of ADMVN concentration. The molecular weight was higher and the molecular weight distribution was narrower with PVCZ polymerized at lower temperatures. For PVCZ prepared in THF at $25^{\circ}C$ using ADMVN concentration of 0.00005 mol/mol of VCZ, weight-average molecular weight of 221,000 was obtained, with polydispersity index of 2.05, and degree of lightness converged to about 99%.

• Macromolecular Research
• /
• 제11권5호
• /
• pp.352-356
• /
• 2003

The objectives of this study were to investigate the influence of gamma irradiation for sterilization on poly(D,L-lactide-co-glycolide) (PLGA) with different molecular weight and the effect of gamma irradiation on the release behavior of 1,3-bis(2-chloroethyl)-1-nitrosourea (BCNU, carmustine) from PLGA wafer with various irradiation doses. The effect of gamma irradiation on PLGA was evaluated by gel permeation chromatography (GPC), differential scanning calorimetry (DSC), and electron paramagnetic resonance (EPR). The weight average molecular weight (M$_{w}$) and glass transition temperature (T$_{g}$) of PLGA decreased after gamma irradiation. The extent of M$_{w}$ reduction was dependent on irradiation dose and PLGA molecular weight. Using EPR spectroscopy, we successfully detected gamma irradiation induced free radicals in PLGA. The gamma irradiation increased the release rate of BCNU from PLGA wafer at applied irradiation doses except 2.5 Mrad of irradiation dose in this study.study.

• 한국식품저장유통학회지
• /
• 제11권4호
• /
• pp.496-502
• /
• 2004

도토리 가루를 알칼리로 침전시키면서 정제하여 도토리 전분을 얻었다. 다시 이 starch를 부탄올 개량법으로 분획하여 도토리 amylose와 amylopectin을 얻었고 Corn starch와 corn amylose, corn amylopectin은 시판되는 시약을 사용하였다. 이 시료들의 분자량 분포도를 관찰하기 위하여 GCP측정을 하였다. GCP측정은 DMSO와 DMF의 용매사용과 표준물질로 pullulan을 사용하여 검정하고 각 시료들의 지연시간으로부터 행하여졌다. 분자량분포도로부터 수평균분자량 (Mn)과 중량평균분자량(Mw) 및 다 분산도를 얻었다. 그 결과 acorn amylose와 corn amylose의 중량평균 분자량이 amylopectin에 비해서 뚜렷이 작게 나타나 ${\alpha}-1,4$ 선형결합을 갖는 amylose와 ${\alpha}-1,4$ 선형결합에 ${\alpha}-1,6$ 결합가지가 있는 amylopectin의 구조상의 차이를 확인할 수 있었다. 또한 분획한 acorn과 시판되는 corn과의 분자량분포도 측정을 비교한 결과 같은 경향을 나타내어 도토리 전분의 분획이 잘 이루어졌음을 확인하였다. 다분산도는 acorn starch와 corn starch 모두 amylose와 amylopectin에 비해 크게 나타났으며 이는 전분이 분획되기전 두 성분의 불균일성에 의한 성질로 분자량분포 범위가 넓게 나타났음을 알 수 있었다. 또한, 전단속도와 온도에 따르는 점도를 관찰하였더니 전단속도가 증가하면 점도는 감소하는 현상을 나타내는 pseudo plastic power law fluid 거동(13)을 보였으며 온도가 증가하면 점도는 지수 함수적으로 감소하였다.

• Carbon letters
• /
• 제12권2호
• /
• pp.70-80
• /
• 2011

Two pitches with different average molecular structures were electrospun and compared in terms of the properties of their fibers after oxidative stabilization, carbonization, and activation. The precursor with a higher molecular weight and greater content of aliphatic groups (Pitch A) resulted in better solubility and spinnability compared to that with a lower molecular weight and lower aliphatic group content (Pitch B). The electrical conductivity of the carbon fiber web from Pitch A of 67 S/cm was higher than that from Pitch B of 52 S/cm. The carbon fiber web based on Pitch A was activated more readily with lower activation energy, resulting in a higher specific surface area compared to the carbon fiber based on Pitch B (Pitch A, 2053 $m^2/g$; Pitch B, 1374 $m^2/g$).

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.766-771
• /
• 1993

A mathematical model is developed to represent the batch reactor for free radical polymerization of PMMA The model is validated by comparing the simulation result with the experimental data. A computational scheme is proposed to determine the trajectory of the reactor temperature that will produce polymer product having the desired molecular weight distribution. For this instantaneous number average chain length and polydispersity are introduced to calculate the reactor temperature. The former is assumed to be a second order polynomial of the sum of the living and dead polymer concentrations. Various reactor temperature, trajectories are observed depending on the reactor conditions and prescribed molecular weight distributions. Fuzzy and PID control algorithms are applied to trace the reactor temperature trajectory. While the PID control gives rise to an overshoot when the trajectory changes its direction, the fuzzy controller yields a more satisfactory performance because it secures information on the trajectory pattern.

• Elastomers and Composites
• /
• 제32권3호
• /
• pp.173-178
• /
• 1997

In this study, the ultrasonic irradiation in elevated pressure was used to alter the molecular weight and MWD of polystyrene. The high pressure reactor was filled with 0.5w/v% polystyrene solution, and then it was pressurized from 500psi to 4000psi. The ultrasound was irradiated in 10 minutes at each pressure, and the extract was collected and analyzed by GPC. Molecular weight distribution was predicted by log-normal and Schulz distribution function. The average molecular weight and polydispersity of polystyrene were decreased, as the pressure applied during the ultrasonic irradiation was increase. It was able to fractionate polymer material and control polydispersity by adjusting pressure in the ultrasonic irradiation.

• 접착 및 계면
• /
• 제13권3호
• /
• pp.101-108
• /
• 2012

음이온개시제인 $K_2S_2O_8$ (KPS)와 양이온개시제인 2,2' azobis(2-methyl-propionamidine) dihydrochloride (AIBA)를 이용하여 MMA와 BMA 단량체간의 무유화공중합을 성공적으로 수행하여 PSD가 1.002~1.008인 단분산성이 우수한 poly(BMA-co-MMA)와 PBMA 라텍스들을 제조하였다. 실험결과, 160~494 nm 범위의 수평균입자경과 (1.25~7.55) ${\times}10^4$ 범위의 수평균분자량을 나타내었다. MMA/BMA 유화중합에 따르는 중합속도와 단량체 및 개시제 농도, DVB/EGDMA 가교제 농도, 중합온도 변화에 따르는 수평균입자경과 수평균분자량의 영향을 조사하였다. MMA/BMA 단량체 중 MMA 농도가 증가함에 따라 중합속도가 증가하였으며 일반적으로 이들 라텍스의 평균입자경과 평균분자량은 MMA/BMA 단량체중량비, 단량체량, 개시제량, 중합온도에 따라 쉽게 조절됨을 발견하였다.