• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.171-171
• /
• 2007

Dysprosium-doped bismuth titanate (BDT) thin films were successfully deposited on Pt(111)/Ti/$SiO_2$/Si(100) substrates by liquid delivery MOCVD process and their structural and ferroelectric properties were characterized. Fabricated BDT thin films were found to be random orientations, which were confirmed by X-ray diffraction experiment and scanning electron microscope analysis. The crystallinity of the BDT films was improved and the average grain size increased as the crystallization temperature increased from 600 to $720^{\circ}C$ at an interval of $40^{\circ}C$. The BDT thin film annealed at $720^{\circ}C$ showed a large remanent polarization (2Pr) of $52.27\;{\mu}C/cm^2$ at an applied voltage of 5V. The BDT thin film exhibits a good fatigue resistance up to $1.0{\times}10^{11}$ switching cycles at a frequency of 1 MHz with applied pulse of ${\pm}5\;V$. These results indicate that the randomly oriented BDT thin film is a promising candidate among ferroelectric materials useti비 in lead-free nonvolatile ferroelectric random access memory applications.

• 대한금속재료학회지
• /
• 제50권4호
• /
• pp.263-270
• /
• 2012

This study investigates the effect of heat treatment on the mechanical properties of a forged Ni-based superalloy called Nimonic 80A. Nimonic 80A ingot samples were fabricated by vacuum spray casting to achieve a fine and homogenized microstructure. The ingot samples were subsequently hot-forged with the diameter of 220 mm at 1373 K. From the center to the surface of the forged Nimonic 80A, its average grain size decreased and its micro-Vickers hardness increased slightly. Solution treatment was carried out at 1353 K with 8 hours of air cooling followed by aging treatment, which was carried out in the range of 873-1073 K with various times from 0.5 to 256 hours. To set the optimum aging conditions, micro-Vickers hardness tests were performed. The maximum hardness value of 388.0 Hv was obtained by aging at 973 K for 32 hours. Also, tensile tests were performed for optimum aging conditions at room temperature and 873 K. The results can be used effectively to perform reasonable heat treatment of Nimonic 80A superalloy.

• 한국표면공학회지
• /
• 제52권2호
• /
• pp.78-83
• /
• 2019

Chloride baths for electrodeposited Ni thin films were fabricated by dissolving metal Ni powders with the mixed solution consisting of HCl and de-ionized water. Current efficiency, residual stress, surface morphology and microstructure of Ni films with the change of metal ion ($Ni^{2+}$) concentrations in the plating solution were studied. Current efficiency was measured to be more than 90% with increasing $Ni^{2+}$ concentrations in the plating solution. Residual stress of Ni thin film was increased from about 400 to 780 MPa with increasing $Ni^{2+}$ concentration from 0.2 to 0.5 M. It is gradually decreased to 650 MPa at 0.9 M $Ni^{2+}$ concentration. Smooth surface morphologies were observed over 0.3 M $Ni^{2+}$ concentration, but nodule surface morphology at 0.2 M. Ni films consist of FCC(111), FCC(200), FCC(220) and FCC(311) peaks in XRD patterns. Preferred orientation of FCC(111) was observed and its intensity was slightly decreased with increasing $Ni^{2+}$ concentration. The average grain size was slightly increased at 0.3 M $Ni^{2+}$ concentration and then slightly decreased with increasing $Ni^{2+}$ concentration.

• Journal of Ceramic Processing Research
• /
• 제19권5호
• /
• pp.383-387
• /
• 2018

Highly transparent $Y_2O_3$ ceramics were produced using spark plasma sintering (SPS) at $1600^{\circ}C$ and 30 MPa for 5 min. When the SPS process was applied with various amounts of $La_2O_3$ as dopant. The specimen doped with 3 mol% $La_2O_3$ showed the highest density, and rapid particle growth and pore growth occurred, exhibiting that the relative density and average grain size are 99.2% and $17.2{\mu}m$, respectively. The specimen showed excellent transmittance of 79.44% in the visible light region (600 nm), resulting that $La_2O_3$ would be a useful dopant for improving the transmittance and mechanical properties of transparent $Y_2O_3$ ceramics produced with SPS.

• 대한금속재료학회지
• /
• 제48권5호
• /
• pp.417-423
• /
• 2010

A dense nanostructured MoSi$_{2}$-SiC composite was synthesized by a pulsed current activated combustion synthesis method within 2 min of one step from mechanically activated powders of Mo$_{2}$C and Si. Simultaneous combustion synthesis and consolidation were accomplished under the combined effects of a pulsed current and mechanical pressure. Highly dense MoSi$_{2}$-SiC with a relative density of up to 98% was produced under simultaneous application of an 80 MPa pressure and pulsed current. The average grain size and mechanical properties of the composite were investigated.

• Journal of Ceramic Processing Research
• /
• 제20권6호
• /
• pp.603-608
• /
• 2019

In this study, the multilayered thin films of (Ba,Sr)TiO3/K(Ta,Nb)O3 were fabricated by the sol-gel and spin coating methods, and their structural and electrical properties were investigated. The specimen showed polycrystalline X-ray diffraction (XRD) characteristics with a tetragonal structure. The average grain size and film thickness for one coating were about 30~40nm and 60nm, respectively. The phase transition temperature of specimen was lower than 10 ℃. The dielectric constant and loss at 20 ℃ of the specimen coated six times were 1,231 and 0.69, respectively. The rate of change in dielectric constant at an applied direct current (DC) voltage of the six times coated thin films was 17.3%/V. The electrocaloric effect was the highest around the temperature at which the remanent polarization rapidly changed. When an electric field of 660kV/cm was applied to the triply coated thin films, the highest electrocaloric property of 4.41 ℃ was observed.

• Journal of Ceramic Processing Research
• /
• 제20권4호
• /
• pp.395-400
• /
• 2019

This study was conducted on the structural and electrical properties of (Ba0.7Sr0.3)TiO3 thin films prepared by the sol-gel and spin-coating methods in order to investigate their applicability to electrocaloric devices. All specimens showed a tetragonal crystal structure and lattice constants of a = 3.972 Å, c = 3.970 Å. The mean grain size of specimens sintered at 800 ℃ was about 30 nm, and the average thickness of 5 times coated specimens was 304~311 nm. In the specimen sintered at 750 ℃, The relative dielectric constant and loss of specimens measured at 20 ℃ were 230 and 0.130, respectively, while dependence of the dielectric constant on unit DC voltage was -8.163 %/V. The remanent polarization and coercive fields were 95.5 μC/㎠ and 161.3 kV/cm at 21 ℃, respectively. And, the highest electrocaloric property of 2.69 ℃ was observed when the electric field of 330 kV/cm was applied.

• 한국재료학회지
• /
• 제32권10호
• /
• pp.403-407
• /
• 2022

This research investigated the effect of Si addition on the microstructure, mechanical properties, electric and thermal conductivity of as-extruded Al 6013 alloys. As the content of Si increased, the area fraction of the second phase increased. As the Si content increased, the average grain size decreased remarkably, from 182 (no Si addition) to 142 (1.5Si), 78 (3.0Si) and 77 ㎛ (4.5Si) due to dynamic recrystallization by the dispersed second particles in the aluminum matrix during the hot extrusion. As the Si content increased, the yield strength and ultimate tensile strength increased. The maximum values of yield strength and ultimate tensile strength were 224 MPa and 103 MPa for the 6013-4.5Si alloy. As the amount of Si added increased, the electrical and thermal conductivity decreased. The electrical and thermal conductivity of the Al6013-4.5Si alloy were 44.0 % IACS and 165.0 W/mK, respectively. The addition of Si to Al 6013 alloy had a significant effect on its thermal conductivity and mechanical properties.

• 대한전자공학회논문지SD
• /
• 제46권7호
• /
• pp.7-14
• /
• 2009

본 연구에서는 어닐링조건이 ZnO 박막의 결정구조((002) 세기, FWHM d-간격, grain 크기, (002) 피크 위치) 광학 (UV 피크, UV 피크 위치) 및 전기적 성질 (전자농도, 비저항, mobility)에 미치는 영향을 조사하였다. ZnO 박막은 RF 마그네트론 스퍼터링으로 ZnO 타겟을 사용하여 SiO$_2$/Si 기판 상에 증착하였다. 증착도중 기판에 열을 가하지 않았고 ZnO 박막은 $500^{\circ}C\sim650^{\circ}C$의 온도범위와 5분$\sim$20분의 시간범위에서 어닐링 되었다. 샘플의 표면 거칠기 및 구조는 각각 SEM과 XRD로 분석하였다. 광학 성질은 He-Cd 325 nm 레이저를 사용하여 상온에서 측정된 photoluminescence (PL)로 평가 하였다. 어닐링 온도 및 시간 변화에 따라 다음과 같은 관계가 관찰되었다: (1) UV intensity, (002) intensity, grain size 사이에 비례관계가 성립하고, (2) UV intensity는 FWHM와 반비례하고, (3) UV intensity는 전자농도와 큰 상관관계가 없고, (4) d-spacing과 (002) peak position은 반비례 관계에 있고, (5) 3.20$\sim$3.24 eV 범위의 UV peak position은 ZnO 박막이 n-type 특성을 가진다는 것을 의미하며 이는 전기적인 특성의 결과와 일치하고, (6) 최고의 광학 및 구조적 특성을 갖기 위한 최적조건은 0.2의 산소분압(O$_2$/(O$_2$+Ar)), 240W의 PF 파워, 상온의 기판온도, 600$^{\circ}C$온도를 20분 유지하는 어닐링 조건, 그리고 20 mTorr의 스퍼터링 압력 등을 들 수 있다.

• 한국지구과학회지
• /
• 제40권2호
• /
• pp.149-162
• /
• 2019

서해안 대조차 개방형 연안에서 2010년 태풍 곤파스 전후에 나타난 지형, 표층 퇴적물, 퇴적상 변화에 대해 연구하였다. 소형의 강한 태풍인 곤파스는 2010년 9월 1일과 2일 사이에 한반도 남서부 해안에 상륙하여 내륙을 관통했다. 태풍 전후에 고창 동호리 조간대의 측선을 따라 30 m 간격으로 22개 지점에서 지형을 측량하고 표층 퇴적물을 채취하였다. 연구 지역을 평균고조면, 평균해수면, 평균저조면을 기준으로 고조대, 중조대, 저조대로 구분하였다. 태풍 전후의 지형 변화는 고조대에서 평균 0.03 m 퇴적, 중조대에서 평균 -0.15 m 침식, 저조대에서 평균 -0.39 m 침식으로 나타났다. 조간대의 태풍 전후 표층 퇴적물은 주로 세립사와 중립사로 구성되며, 세립사의 비율이 가장 높게 나타났다. 태풍 후 표층 퇴적물은 태풍 전에 비해 평균입도가 세립해졌고, 양호한 분급을 보였다.