DOI QR코드

DOI QR Code

The Effect of Rapid Consolidation of Nanostructured MoSi2-SiC Composite on its Mechanical Properties

나노구조 몰리브덴늄실리사이드-실리콘카바이드 복합재료의 급속소결과 기계적 성질

  • Ko, In-Yong (Department of Materials Engineering, Research Center of Advanced Material Development, Chonbuk National University) ;
  • Chae, Seung-Myoung (Department of Materials Engineering, Research Center of Advanced Material Development, Chonbuk National University) ;
  • Shon, In-Jin (Department of Materials Engineering, Research Center of Advanced Material Development, Chonbuk National University,Department of Hydrogen and Fuel Cells Engineering, Specialized Graduate School, Chonbuk National University)
  • 고인용 (전북대학교 신소재공학부) ;
  • 채승명 (전북대학교 신소재공학부) ;
  • 손인진 (전북대학교 신소재공학부,전북대학교 수소연료전지특성화대학원)
  • Received : 2010.01.07
  • Published : 2010.05.22

Abstract

A dense nanostructured MoSi$_{2}$-SiC composite was synthesized by a pulsed current activated combustion synthesis method within 2 min of one step from mechanically activated powders of Mo$_{2}$C and Si. Simultaneous combustion synthesis and consolidation were accomplished under the combined effects of a pulsed current and mechanical pressure. Highly dense MoSi$_{2}$-SiC with a relative density of up to 98% was produced under simultaneous application of an 80 MPa pressure and pulsed current. The average grain size and mechanical properties of the composite were investigated.

Keywords

Acknowledgement

Supported by : 교육과학기술부

References

  1. G. J. Fan, M. X. Quan, Z. Q. Hu, J. Eckert, and L. Schulz, Scripta Mater. 41, 1147 (1999) https://doi.org/10.1016/S1359-6462(99)00285-7
  2. A. K. Vasudevan and J. J. Petrovic, Mater. Sci. Eng. A 155, 1 (1992) https://doi.org/10.1016/0921-5093(92)90308-N
  3. Y. Ohya, M. J. Hoffmann, and G. Petzow, J. Mater. Sci. Lett. 12, 149 (1993) https://doi.org/10.1007/BF00819942
  4. P. J. Meschter, Metall. Trans. A 23, 1763 (1992) https://doi.org/10.1007/BF02804369
  5. J. K. Yoon, K. H. Lee, G. H. Kim, J. H. Han, J. M. Doh, and K. T. Hong, Mater. Trans. 45, 2435 (2004) https://doi.org/10.2320/matertrans.45.2435
  6. S. K. Bhaumik, C. Divakar, A. K. Singh, and G. S. Upadhyaya, J. Mater. Sci. Eng. A 279, 275 (2000) https://doi.org/10.1016/S0921-5093(99)00217-8
  7. D. Y. Oh, H. C. Kim, J. K. Yoon, and I. J. Shon, J. Alloys Compnds 395, 174 (2005) https://doi.org/10.1016/j.jallcom.2004.10.072
  8. Z. Houan, C. Pin, W. Mengjun, and L. Xinyu, Rare Met. 21, 304 (2002)
  9. J. K. Yoon, K. H. Lee, G. H. Kim, J. H. Han, J. M. Doh, and K. T. Hong, Mater. Trans. 45, 2435 (2004) https://doi.org/10.2320/matertrans.45.2435
  10. J. Karch, R. Birringer, and H. Gleiter. Nature 330 (1987)
  11. A. M. George, J. Iniguuze, and L. Bellaiche, Nature 413 (2001)
  12. D. Hreniak and W. Strek, J. Alloys Comp. 341, 183 (2002) https://doi.org/10.1016/S0925-8388(02)00067-1
  13. E. S. Ahn, N. J. Gleason, A. Nakahira, and J. Y. Ying, Nano Lett. 241, 207 (2002)
  14. D. M. Lee, K. M. Jo, I. J. Shon, J. Kor. Inst. Met. & Mater. 47, 344 (2009)
  15. I. J. Shon, D.K. Kim, I. Y. Ko, J. K. Yoon, and K. T. Hong, Mate. Sci. For. 534-536, 525 (2007)
  16. C. Suryanarayana and M. Grant Norton, X-ray Diffraction A Practical Approach, p.213. Plenum Press (1998)
  17. M. Ohyanagi, T. Yamamoto, H. Kitaura, Y. Kodera, T. Ishii, and Z. A. Munir, Scripta Materialoa 50, 111 (2004) https://doi.org/10.1016/j.scriptamat.2003.09.027
  18. Z. Shen, M. Johnsson, Z. Zhao, and M. Nygren, J. Am. Ceram. Soc. 85, 1921 ( 2002) https://doi.org/10.1111/j.1151-2916.2002.tb00381.x
  19. J. E. Garay, U. Anselmi-Tamburini, Z. A. Munir, S. C. Glade, and P. Asoka-Kumar, Appl. Phys. Lett. 85, 573 (2004) https://doi.org/10.1063/1.1774268
  20. J. R. Friedman, J. E. Garay. U. Anselmi-Tamburini, and Z. A. Munir, Intermetallics 12, 589 (2004) https://doi.org/10.1016/j.intermet.2004.02.005
  21. J. E. Garay, J. E. Garay. U. Anselmi-Tamburini, and Z. A. Munir, Acta Mater. 51, 4487 (2003) https://doi.org/10.1016/S1359-6454(03)00284-2
  22. K. Niihara, R. Morena, and D. P. H. Hasselman, J. Mater. Sci. Lett. 1, 12 (1982)
  23. D. G. Morris, M. Leboeuf, and M. A. Morris, Mater. Sci. Eng. A 251, 262 (1988)