• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.2
• /
• pp.45-50
• /
• 2015

Compositionally graded AlGaN epilayer was grown by HVPE (hydride vapor phase epitaxy) on (0001) c-plane sapphire substrate. During the growth of graded AlGaN epilayer, the temperatures of source and the growth zone were set at $950^{\circ}C$ and $1145^{\circ}C$, respectively. The growth rate of graded AlGaN epilayer was about 100 nm/hour. The changing of Al contentes was investigated by field emission scanning electron microscope (FE-SEM) and energy dispersive spectroscopy (EDS). From the result of atomic force microscope (AFM), the average of roughness in 2 inch substrate of graded AlGaN epilayer was a few nanometers scale. X-ray diffraction (XRD) with the result that the AlGaN (002) peak ($Al_{0.74}Ga_{0.26}N$) and AlN (002) peak were appeared. It seems that the graded AlGaN epilayer was successfully grown by the HVPE method. From these results, we expect to use of the graded AlGaN epilayer grown by HVPE for the application of electron and optical devices.

• Journal of Environmental Science International
• /
• v.18 no.4
• /
• pp.463-471
• /
• 2009

A study on vegetation in the Mangyeong River and Dongjin River basins and the surrounding regions of the Saemangeum Reclaimed Land was conducted in a series of efforts to determine the expected ecological changes in the salt marshes, to restore their vegetation, to explore the restoring force of halophyte, to examine the community mechanism and, ultimately, to rehabilitate marshy land vegetation along the lakeside, coastal dune and salt marshes of the Saemangeum Project Area. The findings of the study may be summed up as follows: Five species such as Suaeda japonica, Salicornia herbacea, Atriplex gmelini, Aster tripolium and Suaeda asparagoides that are mostly distributed in the estuary of the Saemangeum Reclaimed Land were analyzed to examine the mechanism of halophyte to maintain their community. To find out the strategies of plants for survival and the cause of forming community structure, a research was made as for appearance ratio of biomass, root lengths and germination. With regard to biomasses of halophyte, the biomass of Suaeda japonica increases rapidly, while Salicornia herbacea adopts a strategy of unstable growth pattern by which the biomass increases slowly in parallel with its slow speed of growth since initial appearance of young sapling. In contrast, Suaeda asparagoides, Atriplex gmelini and Aster tripolium choose to adapt themselves to environment promptly by being transformed into life form of annual or biennial plant, a pattern that is presumed to be favorable and stable for survival in the later stage of growth. In short, there is a sharp distinction among the 5 species: i.e. Suaeda japonica that begins to grow fast in the length of surface and underground section but slows down from the mid-stage on; Salicornia herbacea that grows slowly in the beginning step but starts to step up from the middle onward; Atriplex gmelini and Aster tripolium growing slowly in the initial stage but fast later on; and Suaeda asparagoides that turns from the constant growth in the beginning to rapid growth in the later period. The outcomes of the analysis into status of growth and influencing factors of Suaeda japonica in the sowing field that is most widely prevalent in the Saemangeum Reclaimed Land as a sort of ecological pioneer in the salt marshes showed that the average size of grass lands, density and number of individuals increase in the natural sowing field as well as in the plowing field regardless of their physical as well as physico-chemical features of the soil as the season progresses from June to October of a year.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.3
• /
• pp.1295-1301
• /
• 2015

Background: Cancer imposes a significant economic burden on individuals, families and society. The purpose of this study was to estimate the economic burden of cancer using the healthcare claims and cancer registry data in Korea in 2009. Materials and Methods: The economic burden of cancer was estimated using the prevalence data where patients were identified in the Korean Central Cancer Registry. We estimated the medical, non-medical, morbidity and mortality cost due to lost productivity. Medical costs were calculated using the healthcare claims data obtained from the Korean National Health Insurance (KNHI) Corporation. Non-medical costs included the cost of transportation to visit health providers, costs associated with caregiving for cancer patients, and costs for complementary and alternative medicine (CAM). Data acquired from the Korean National Statistics Office and Ministry of Labor were used to calculate the life expectancy at the time of death, age- and gender-specific wages on average, adjusted for unemployment and labor force participation rate. Sensitivity analysis was performed to derive the current value of foregone future earnings due to premature death, discounted at 3% and 5%. Results: In 2009, estimated total economic cost of cancer amounted to $17.3 billion at a 3% discount rate. Medical care accounted for 28.3% of total costs, followed by non-medical (17.2%), morbidity (24.2%) and mortality (30.3%) costs. Conclusions: Given that the direct medical cost sharply increased over the last decade, we must strive to construct a sustainable health care system that provides better care while lowering the cost. In addition, a comprehensive cancer survivorship policy aimed at lower caregiving cost and higher rate of return to work has become more important than previously considered.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.4
• /
• pp.568-578
• /
• 2020

Objective: The objective of this study was to investigate effects of supplementation of culture media from solid-state fermented Isaria cicadae (I. cicadae) on performance, serum biochemical parameters, serum immune indexes, antioxidant capacity and meat quality of broiler chickens. Methods: A total of 648 Arbor Acres male broiler chickens(1 d; average body weight, 42.93±0.47 g) were randomly assigned to 6 treatments, each with six replicates and 18 broiler chickens per replicate. Broiler chickens were fed phase I (d 1 to 21) and phase II (d 22 to 42) diets. The phase I diets were corn and soybean-meal based diets supplemented with 0%, 2%, 4%, 6%, 8%, or 10% culture media from solid-state fermented I. cicadae respectively. The phase II diets were corn and soybean-meal based diets supplemented with 0%, 1.33%, 2.67%, 4.00%, 5.32%, or 6.67% culture media from solid-state fermented I. cicadae respectively. Results: In phase I, the broiler chickens with the supplementation of culture media had increased body weight gain and feed intake (linear and quadratic, p<0.05) with increasing inclusion of culture media. The levels of serum total antioxidant capacity (T-AOC), glutathione (GSH) and superoxide dismutase (SOD) increased linearly (p<0.05). In phase II, levels of serum T-AOC and interleukin-1β increased linearly (p<0.05), and GSH increased (p<0.05). In the kidney, GSH and glutathione peroxidase (GSH-Px) concentrations increased (linear and quadratic, p<0.05) and SOD concentration increased linearly (p<0.05). Compared to the control, shear force and drip loss of breast muscle decreased (linear and quadratic, p<0.05). Drip loss of leg muscle decreased linearly and quadratically (p<0.05). Conclusion: Dietary supplementation of culture media from solid-state fermented I.cicadae which was enriched in both wheat and residual bioactive components of I. cicadae enhanced the growth performance of broiler chickens. It also improved body anti-oxidative status and contributed to improve broiler meat quality.

• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.2
• /
• pp.277-295
• /
• 1997

After clinical adjustment of dental casting restoration, re-polishing procedure is recommanded because the smooth gold sureface is lost. But there is the possibility to get more loose contact than that intended by loss of gold alloy according to the kinds of polishing materials and polishing time. Therefore in this study I polished type II gold alloy with 390gm force, 20,000rpm speed, and 8 kinds of gold alloy polishing materials, fabricated by 4 companies and then measured the amount of loss of gold alloy with Surfcorder SEF-30D and observed alloy surfaces polished by 3 brown rubber points with SEM. The amount of loss of gold alloys polished with 8 kinds of polishing materials and the degree of smoothness of gold alloys according to polishing time and polishing materials were compared. The following results were obtained : 1. When the amount of loss of gold alloys polished with 3 kinds of brown rubber point was compared, Alphalex brown point had the most amount of alloy loss, followed in decreasing order by Shofu brown point and Eveflex brown point. There was statistically significant difference in the amount of alloy loss according to polishing materials. 2. When the amount of loss of gold alloys polished with 5 kinds of green rubber point was compared, Shofu green point had the most amount of alloy loss, followed in decreasing order by Alphaflex green point, Dedeco green clasp polisher, and Eveflex green point. There was statistically significant difference in the amount of alloy loss according to polishing materials except Alphaflex green point and Dedeco green clasp polisher. 3. When the amount of loss of gold alloys polished with all kinds of rubber point was compared, there was no significant difference in Eveflex brown point, Alphaflex green point, and Dedeco green clasp polisher. 4. When average amount of alloy loss per 1 revolution by polishing materials was compared, Alphalex brown point had the greatest value as $0.329{\mu}m$ and Shofu supergreen point had the lowest value as $0.022{\mu}m$. 5. When the degree of sureface smoothness of gold alloy polished with 3 kinds of brown rubber point was compared, In Alphalex brown point surface roughness was completely lost after 20 seconds polishing time, in Shofu brown point 30 seconds, in Eveflex brown point 40 seconds. But in every gold alloys fine scratch formed by rubber points was observed. Based on the results of this study, as rubber polishing materials used in polishing of dental casting restoration after clinical adjustment influenced on the tightness of occlusal or proximal contact, we should make dental casting restoration with minimum error through careful laboratory procedure and form very smooth surface of restoration with tripoli and rouge after use of silicone polishing materials.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1085-1091
• /
• 1998

The purpose of this study was to investigate the rheological properties of surimi gels and imitation crab-leg products by stress-relaxation test and to examine the correlations between stress-relaxation parameters and T.P.A. parameters. The linear viscoelasticity of surimi gels and imitation crab-leg products was observed in the range of the strain of $5{\sim}20%$ at cross-head speed 2.4 mm/sec. The average tensile forces of surimi gels and imitation crab-leg products were similar, 370.4 g and 436.4 g, respectively, but surimi gels showed higher relaxation time and viscous component (17256.1 sec, $1.357{\times}10^{10}$ poise) than those of imitation crab-leg products (6110 sec, $0.519^{\ast}10^{10}$ poise). Estimated tensile force of each exponential term in relaxation test was highly related with hardness, gumminess and chewiness of T.P.A (r=0.93, 0.93, 0.95, p<0.01), the relaxation time of each exponential term was rrelated with cohesiveness (r=0.89, p<0.01) of T.P,A. and the elastic component of exponential term with gumminess, chewiness and hardness (r=0.92, 0.94, 0.93. p<0.01) of T.P.A.. The viscous component of exponential term was related with cohesiveness (r=0.83, p<0.05) of T.P.A.. The degree of texturization was negatively related with the relaxation time and viscous component (r=-0.92, -0.96, p<0.01).

• Journal of Animal Science and Technology
• /
• v.46 no.4
• /
• pp.525-536
• /
• 2004

The objective of this study was to identify the quantitative traits loci(QTL) for meat quality traits in pigs. Three-generation resource population was constructed from a cross between Korean native boars and Landrace sows. The resource population including founders, $F_1$ and $F_2$ was genotyped for 23 microsatellite markers on chromosome 7. The sex average total length of linkage map on chromosome 7 was estimated 154.6 cM. Meat quality traits including meat pH, meat color, drip loss, shear force, heating loss, crude fat, crude protein, crude ash and water content in muscle were collected from $F_2$ animals. For the QTL mapping, we used $F_2$ QTL Analysis Servlet of QTL express for web-based QTL mapping tools(http://qtl.cap.ed.ac.uk/). The QTLs for CIE-a and CIE-b on SSC7 were significantly detected at 1% and 5% chromosome-wide level, respectively.

• Journal of Animal Science and Technology
• /
• v.45 no.5
• /
• pp.819-824
• /
• 2003

Effects of feeding browses on growth and meat quality of Korean native goats were investigated. Twenty eight heads of male goats were divided into four treatment groups fed diets containing oak browse, pine browse, fermented pine browse, and rice straw. Growth rate, feed intake, carcass and meat quality and blood and serum criteria were investigated. The highest average daily gain of goats was 45.3g from oak browse, and goats on pine browse gained similar to those on fermented pine browse. Daily forage intake was 197g DM for oak browse and 74g DM for fermented pine browse. Feed efficiency(g feed/g gain) of oak browse was 11.0g and that of pine browse was 15.1g. From the results of serological inspection, metabolism in body was normal with all the browses tested. Dressing percentage was 45.1~46.2% and meat percentage was 55.2~55.9% without significant differences between diets. Fat percentage of goat carcasses fed rice straw was higher than those fed pine browse or fermented pine browse which was, however, not significantly different from those on oak browse. Shear force and coking loss of goat meat on pine browse or fermented pine browse was less than those on rice straw(p〈0.05) without significant differences between other browses. Juiciness, tenderness, and flavor of the goat meat were the better(p<0.05) from the pine browse diet than from rice straw.

• Journal of Animal Science and Technology
• /
• v.53 no.2
• /
• pp.139-146
• /
• 2011

This study was carried out to investigated astaxanthin producing "Xanthophyllomyces dendrohous" on growth performances and meat quality in ducks. A total of 450 ducks (cheribery) were allotted into 3 groups. The three groups were control (commercial feed), treatment 1 (0.1% feed additives), and treatment 2 (0.2% feed additives). Each group had 3 replicates. Viable cell number of "Xanthophyllomyces dendrohous" is $1.0{\times}10^8$ cfu/g. Growth performance carried out during 39 days. Average weight gain was significantly higher (p<0.05) in treatment 2 than that of control. Feed conversion was significantly lower (p<0.05) in treatment 1 and 2 than that of control. The results of nutrients composition analysis of duck meat showed that treatment 1 and 2 had significantly lower (p<0.05) fat and cholesterol levels. Water holding capacity showed significantly higher (p<0.05) value than that of control. Both treatment groups showed lower (p<0.05) value than control in drip loss and shear force. Control showed higher unsaturated fatty acids(palmitic acid, stearic acid) content than treatment 1 and 2. Treatment 1 and 2 showed significantly lower (p<0.05) saturated fatty acids (oleic acid, linoleic acid) levels than control. These results suggested that the supplementation of feed additives containing "Xanthophyllomyces dendrohous" might be used effectively for inproving productivity and meat quality of ducks.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.5
• /
• pp.671-683
• /
• 2005

Statement of problem: The most commonly reported problem associated with dental implant restoration is the loosening of the screws. Purpose: This study compared the efficacy of an implant system incorporating an anti-rotational locking sleeve(Anti-Rotating Inner Post Screw System(ARIPS-system)) with other, traditional implant systems as a means of minimizing vibration loosening. Materials and methods: Three implant systems were examined; the conventional external hex type, the ARIPS-system, and the internal taper type implant system 30 specimens(10 samples per group)were fabricated and each abutment screw was secured to the implant future with 32Ncm of torque force and loosening torque was measured using a Torque Gauge. The procedure was repeated 3 times, recording initial loosening torque each time. The re-tightened abutment screw was subjected to a cyclic load having a maximum forte of 200N and minimum of 20N at 2Hz over a period of 12,600 cycles. after which the loosening torque was measured. Measured values were calaulated for statistical analysis. Analysis of measured value was performed by 3 methods: (i) as a percentage average of the initial 3 loosening-torque values(initial loosening value) to the tightening torque of 32Ncm, (ii) as a percentage of the loosening torque value after a load of 200N(experimental value) to the initial loosening value, and (iii) as a percentage of the experimental value to the 32Ncm of tightening torque. The analyses shows the amount of initial loosening at the screw, loosening by repetitive load and the the final loosening value. Results: The results of this study were as follows (1) Percentage of initial loosening value to tightening-torque was increased in order of external hex, ARIPS-system and internal taper and all values between each groups showed statistical significance (p<0.05). (2) Percentage of experimental value to initial loosening value was increased in order of external hex, ARIPS-system and internal taper. Value of internal taper showed significant difference with those of external hex and ARIPS-system (p<0.05). (3) Percentage of experimental value to tightening torque was increased in order of external hex, ARIPS-system and internal taper and all values between each groups showed statistical significance (p<0.05). Conclusion: The results of the analysis of the final loosening level value, which are closely correlated to clinical use, show that the ARIPS-system can be a useful means of minimizing abutment screw loosening when compared to the external hex type system. Although further clinical studies need to be made, the ARIPS-system should be considered to maximize the long-term success of the implant prosthesis.