• Journal of Biosystems Engineering
• /
• v.24 no.1
• /
• pp.19-24
• /
• 1999

Motivated by the need for developing the more efficient lighting system for light culture of strawberries in the greenhouse, this paper aims at acquiring and suggesting more concrete and scientific foundation of illuminating position, numbers of light source by investigating the types of lighting system and illumination distribution in the greenhouse for light culture of strawberries. The results of investigation and experiment are summarized as following below: 1. The types of lighting system used in the greenhouse producing strawberries were classified as 1 line and 2 lines lighting system. 2. As for the arranging types of artificial light, 2 lines lighting system, were classified as Z-type, N-type and W-type. (Refer Fig. 3) 3. The results of illumination distribution for Z-type, N-type and W-type of 2 lines illuminating system in the greenhouse with a small size tunnel measured at the height of 1.5m from the ground with 220V, 100W lamp in 6m light gap showed that maximum illuminance are 961x, 1211x, 1251x, minimum illuminance are 4.41x, 4.71x, average illuminance are 33.71x, 43.11x, 44.51x and standard deviations are 28.31x, 35.41x, 38.31x at each types. 4. Proportion of the area below optimal illuminance to floor area at the two lines illuminating system of Z-, N-, and W-type in greenhouse were appeared as 39.4%, 26.0% and 26.3%, respectively. Also proportion of the area over optimal illuminance to floor area at the two lines illuminating system of Z-, N-, W-type in greenhouse were appeared as 16.8%, 14% and 14.7%, respectively. Thus N-type was superior to the others from the view points of optimal illumination distribution and energy saving.

• Journal of Broadcast Engineering
• /
• v.13 no.4
• /
• pp.516-527
• /
• 2008

This paper introduces a derivation method of both P-SKIP and B-SKIP modes for illumination compensation in the multi-view video coding scheme. In this proposed method, mismatches between IC flag and IC offset in P-SKIP mode are removed, and also computational complexity is far reduced in B-SKIP mode in comparison to a multi-view video coding scheme. In simulation results, proposed method has the almost same coding efficiency in comparison with the referenced coding scheme. However computational complexity in 11m-time decoding process is tremendously reduced, such that the average number of blocks that should be processed in P-SKIP mode is saved in about 7.47%, and the average number of operations per block in B-SKIP mode is saved in about 50.36% and corresponding average decoding time per block is also saved in 46%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1040-1048
• /
• 2009

This paper proposes an auto flesh tone balance algorithm for the picture that is taken for people. General white balance algorithms bring neutral region into focus. But, other objects can be basis if its spectral reflectance is known. In this paper the basis for white balance is human face. For experiment, first, transfer characteristic of image sensor is analyzed and camera output RGB on average face chromaticity under standard illumination is calculated. Second, Output rate for the image is adjusted to make RGB rate for the face photo area taken under unknown illumination RGB rate that is already calculated. Input tri-stimulus XYZ can be calculated from camera output RGB by camera transfer matrix. And input tri-stimulus XYZ is transformed to standard color space (sRGB) using sRGB transfer matrix. For display, RGB data is encoded as eight-bit data after gamma correction. Algorithm is applied to average face color that is light skin color of Macbeth color chart and average color of various face colors that are actually measured.

• Journal of Korean Public Health Nursing
• /
• v.16 no.1
• /
• pp.190-200
• /
• 2002

This study was carried out to investigate and analyze TSP of the PC rooms. The concentration of the total suspended particulate and heavy metals contained in the total suspended particulate of the 15 PC rooms located in one local city were measured. The statistical correlation coefficients between the total suspended particulate and factors of the indoor condition (number of fan or size of pc room, illumination), between the heavy metals and factors of the indoor condition were studied. The results are as follows: 1. The factors of the indoor condition of the 15 PC rooms are as follows. Average illumination was 24 luxes. Average number of computers installed were 37. Average number of the fans was 7. and the size of investigated PC rooms was $139.94m^2$. 2. The mean age of the subjects was 21.8 years old. they $(51.5\%)$ used the 15 pc rooms for fewer than 2 hours per one day. 3. The mean concentration of total suspended particulate (TSP) is lower in the evening ${139.085\;(2.462)\;{\mu}g/m^3}$ than the night ${166.216(2.609){\mu}g/m^3}$. 4. The mean concentration of total suspended particulate was industrial work area) residential area) commercial area. 5. The distribution of heavy metals were indicated as Zn>Cr>Pb>Cd in the indoor air at PC rooms. and the concentration rate of Zn was the highest among heavy metals. but this increase didn't show any relationship with many factors of indoor condition (number of fan or size of pc room, lighting) 6. The concentration of TSP & heavy metals didn't have any relationship between the factors of indoor environment (number of fans, size of pc room, lighting).

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.4
• /
• pp.392-400
• /
• 2001

This paper proposes an illuminant estimation algorithm that estimates the spectral power distribution of an incident light source from a single image. The proposed illumination recovery procedure has two phases. First, the surface spectral reflectances are recovered in the maximum achromatic region (MAR) which is the most achromatic and highly bright region of an image after removing partially the effect of illumination using a modified gray world algorithm. Here, the surface reflectances of MAR are estimated using the principal component analysis method along with a set of given 1269 Munsell samples. Second, the Population of reflected lights is determined with 1269 Munsell samples and a set of illuminations then the spectral distribution of re(looted lights of MAR is selected from the spectral database. That is, color differences are compared between the reflected lights of the MAR and the spectral database, which is the set of reflected lights built by the given set of Munsell samples and illuminants. Then the closest colors from the spectral database are selected. Finally, the illuminant of an image can be calculated dividing the average spectral distributions of reflected lights of MAR by the average surface reflectances of the MAR. In order to evaluate the proposed algorithm, experiments with artificial scenes, which are exposed to chromatic illuminants, were performed and the spectral distribution of estimated illumination and color difference are compared with results of the conventional method.

• Journal of Broadcast Engineering
• /
• v.24 no.3
• /
• pp.463-471
• /
• 2019

This paper proposes a method for reducing the complexity of LIC (Local Illuminance Compensation) for bi-directional inter prediction. The LIC performs local illumination compensation using neighboring reconstruction samples of the current block and the reference block to improve the accuracy of the inter prediction. Since the weight and offset required for local illumination compensation are calculated at both sides of the encoder and decoder using the reconstructed samples, there is an advantage that the coding efficiency is improved without signaling any information. Since the weight and the offset are obtained in the encoding prediction step and the decoding step, encoder and decoder complexity are increased. This paper proposes two methods for low complexity LIC. The first method is a method of applying illumination compensation with offset only in bi-directional prediction, and the second is a method of applying LIC after weighted average step of reference block obtained by bidirectional prediction. To evaluate the performance of the proposed method, BD-rate is compared with BMS-2.0.1 using B, C, and D classes of MPEG standard experimental image under RA (Random Access) condition. Experimental results show that the proposed method reduces the average of 0.29%, 0.23%, 0.04% for Y, U, and V in terms of BD-rate performance compared to BMS-2.0.1 and encoding/decoding time is almost same. Although the BD-rate was lost, the calculation complexity of the LIC was greatly reduced as the multiplication operation was removed and the addition operation was halved in the LIC parameter derivation process.

• Journal of the Korean Society of Industry Convergence
• /
• v.4 no.1
• /
• pp.71-75
• /
• 2001

This study investigates the relationship between size of cosmetic shops, size of showcases, sorts and arrangement of light source, floor plan, and illuminance measured of interior space. From this result, the average space size of cosmetic shops were $623.2{\times}512.9{\times}258.1cm$(width, length, height), the average space size of showcases were $273.3{\times}53.8{\times}89.5cm$ (width, depth, height). The light source was most frequently used fluorescent lamp, and illuminance was the most highest nearby main showcase, and average illuminance were 722[Ix], uniformity were 0.3.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.1
• /
• pp.13-18
• /
• 2004

This study investigates actual conditions and awareness of employees female apparel shops within department store in seoul area. Investigating the actual conditions of the lighting indicated that the employees thought that the lighting charged much expenses to them, and the effort to improve the efficiency of current lighting was insufficient for lack of en expert knowledge on the lighting. The average space size of apparel shops were 11.7평, the light source was most frequently used fluorescent lamp and halogen lamp. The illuminance was the most highest nearby wall display(average 1089lx), and nearby hanger(average 1075lx).

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2000.11a
• /
• pp.116-122
• /
• 2000

설계초기단계에서 고효율 조명기기의 채택을 원활하게 해주고, 동시에 LLF값을 산정 해줌으로써 건물설계에 적용되는 조명에너지를 절감해주기 위해서는 조명 설계 기법의 고도화와 조명 설계 과정의 표준화가 필요하다. 이를 위해서 구역공간법(ZCM: Zonal Cavity Method)을 이용한 평균조도 계산용 소프트웨어를 개발하였다.

• Journal of KIISE:Software and Applications
• /
• v.34 no.3
• /
• pp.255-265
• /
• 2007

In this paper, we propose a new illumination-robust drowsy driver monitoring system with single CCD(Charge Coupled Device) camera for intelligent vehicle in the day and night. For this system that is monitoring driver's eyes during a driving, the eye detection and the measure of eyelid movement are the important preprocesses. Therefore, we propose efficient illumination compensation algorithm to improve the performance of eye detection and also eyelid movement measuring method for efficient drowsy detection in various illumination. For real-time application, Cascaded SVM (Cascaded Support Vector Machine) is applied as an efficient eye verification method in this system. Furthermore, in order to estimate the performance of the proposed algorithm, we collect video data about drivers under various illuminations in the day and night. Finally, we acquired average eye detection rate of over 98% about these own data, and PERCLOS(The percentage of eye-closed time during a period) are represented as drowsy detection results of the proposed system for the collected video data.