• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.7
• /
• pp.968-978
• /
• 2003

The effects of monensin, Tween 80 and exogenous fibrolytic enzymes on ruminal fermentation and animal performance were studied in vitro and in vivo. In Expt 1, the effects of the surfactant Tween 80 (0.2% wt/wt, DM basis) on ruminal fermentation of alfalfa, corn and orchardgrass silages were investigated using in vitro gas production techniques. Tween 80 did not affect (p>0.05) cumulative gas production at 24 h, but it reduced (p<0.05) the lag in fermentation of all three silages. With corn silage and orchardgrass silage, gas production rates and concentrations of total volatile fatty acids (VFA) were increased (p<0.05) by Tween 80; with alfalfa silage, they were reduced (p<0.05). Tween 80 increased (p<0.05) the proportion of propionate in total VFA, and reduced (p<0.05) acetate to propionate ratios (A:P) with all three silages. In Expt 2, exogenous fibrolytic enzymes (E; at 0, 37.5 or 75 g/tonne DM), monensin (M; at 0 or 25 ppm and Tween 80 (T; at 0 or 2 L/tonne DM) were added alone or in combination to backgrounding and finishing diets fed to 320 crossbred steers in a feeding trial with a $3{\times}2{\times}$2 factorial arrangement of treatments. The backgrounding and finishing diets contained barley grain and barley silage in ratios of 57.8:42.2 and 93.5:6.5 (DM basis), respectively. Added alone, none of the additives affected DM intake (p>0.1) in the backgrounding or in the finishing period, but interactive $M{\times}T$ effects were observed in the finishing period (p=0.02) and overall (p=0.04). In the finishing period, T without M tended to reduce DM intake (p=0.11), but T with M increased (p=0.05) DM intake. Monensin increased average daily gain (ADG) during backgrounding (p=0.07) and finishing (p=0.01), and this ionophore also improved overall feed efficiency (p=0.02). Warm carcass weight was increased (p<0.001) by M, but dressing percentage was reduced (p=0.07). In the backgrounding period, T increased ADG by 7% (p=0.06). Enzymes increased (p=0.07) ADG by 5 and 6% (low and high application rates, respectively) during backgrounding, but did not affect (p>0.10) ADG during finishing, or overall feed efficiency. Whereas T enhanced the positive effects of M on ADG during backgrounding (p=0.04) and overall (p=0.05), it had no impact (p>0.1) on the effects of E. Interactions between M and T suggest that the surfactant may have potential for enhancing the positive effects of monensin on beef production, but this requires further research.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.22-30
• /
• 2009

Due to high levels of integration and complexity, the Network-on-Chip (NoC) approach has emerged as a new design paradigm to overcome on-chip communication issues and data bandwidth limits in conventional SoC(System-on-Chip) design. In particular, exponentially growing of energy consumption caused by high frequency, synchronization and distributing a single global clock signal throughout the chip have become major design bottlenecks. To deal with these issues, a globally asynchronous, locally synchronous (GALS) design combined with low power techniques is considered. Such a design style fits nicely with the concept of voltage-frequency-islands (VFI) which has been recently introduced for achieving fine-grain system-level power management. In this paper, we propose an efficient design methodology that minimizes energy consumption by VFI partitioning on an NoC architecture as well as assigning supply and threshold voltage levels to each VFI. The proposed algorithm which find VFI and appropriate core (or processing element) supply voltage consists of traffic-aware core graph partitioning, communication contention delay-aware tile mapping, power variation-aware core dynamic voltage scaling (DVS), power efficient VFI merging and voltage update on the VFIs Simulation results show that average 10.3% improvement in energy consumption compared to other existing works.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.481-491
• /
• 2009

This study was conducted to observe some characteristics of aneuploid trees obtained from the crosses between diploid and triploid in the first experiment. The results showed that the difference among the percentage of aneuploid's pollen grain germination was large, and all of them were lower than that of diploid 'Hongro' (82.4%). The average weight and size of each aneuploid's fruit was far lighter and smaller than that of diploid 'Hongro'. According to the width and length, all of the fruits shape was flat or short-globose conical shape except for JF3942. Almost all the aneuploid had higher sugar content than 'Hongro', nearly half of aneuploid fruits were firmer than that of diploid 'Hongro'. As for the acid contents of aneuploid fruits, the results were greatly different from those of previous studies on diploid apples, in present study the citric acid and tartaric acid contents were more than the malic acid which are dominant acid in most cultivars of apples. Both the length and width of aneuploid tree were shorter than that of diploid 'Hongro'. Most aneuploid trees' height was longer than width, but there were 4 exceptions. The size of leaves was smaller than that of diploid 'Hongro' according to the length and width of leaves measured. In all, aneuploid's vegetative growth is not as vigorous as diploid.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.27 no.3
• /
• pp.161-166
• /
• 2007

This experiment was conducted to compare the agronomic characteristics and productivity of barley at paddy field of Iksan (National Honam Agricultural Experiment) from 1998 to 2001. The most fast 50% heading stage date variety was Keunalbori, Tapkolbori and Sodunchalbori, but Kinssalbori was very late as 3th May. The average dry matter (DM) content of naked and hulled barley were 37.9% and 37.1%, respectively. Saessalbori and Naehanssalbori of naked barley showed the highest in DM yield by 11,260 kg/ha and 11,160 kg/ha but the DM yield of Kinssalbori was low by 7,530 kg/ha. And Milyang 92, Keunalbori and Tapkolbori of hulled barley showed the highest in DM yield by 12,730 kg/ha, 12,320 kg/ha and 12,300 kg/ha but the DM yield of Olbori was low by 6,660 kg/ha. Acid detergent fiber (ADF), neutral detergent fiber (NDF) and total digestible nutrient (TDN) content of naked varieties was 30.3%, 60.8% and 65.1%, and ADF, NDF and TDN content of hulled varieties was 33.6%, 61.1% and 62.4%, respectively. And Tapkolbori showed the highest grain yield by 6,370 kg/ha. According to the results obtained from this study, it is suggested that "Milyang 92, Keunalbori and Tapkolbori" would be recommendable for fall sown barley cultivar for at paddy field in Honam region.

• Journal of the Korean Ceramic Society
• /
• v.40 no.4
• /
• pp.323-327
• /
• 2003

Microwave dielectric properties of (P $b_{0.4}$C $a_{0.6}$)[($Fe_{\frac{1}{2}}$N $b_{\frac{1}{2}}$)$_{1-x}$ (M $g_{1}$ 3/N $b_{2}$ 3/)x] $O_3$ (PCFMN) ceramics were investigated as a function of (M $g_{1}$ 3/N $b_{2}$ 3/)$^{4+}$ content (0.1$\leq$x$\leq$0.8). A single perovskite phase with the cubic structure was obtained through the given composition range. The unit cell volume was increased with (M $g_{1}$ 3/N $b_{2}$ 3/)$^{4+}$, due to the larger average ionic size of (M $g_{1}$ 3/N $b_{2}$ 3/)$^{4+}$ than that of ($Fe_{\frac{1}{2}}$N $b_{\frac{1}{2}}$)$^{4+}$ for B-site ion. Dielectric constant (K) and Temperature Coefficient of Resonant Frequency(TCF) of PCFMN ceramics were dependent on (M $g_{1}$ 3/N $b_{2}$ 3/)$^{4+}$ content due to the decrease of ionic polarizability and B-site bond valence, respectively. Qf value was decreased with (M $g_{1}$ 3/N $b_{2}$ 3/)$^{4+}$ content due to the decrease of grain size. Typically, K of 73.56, Qf of 5,074 GHz and TCF of -6.45 ppm/$^{\circ}C$ were obtained for the specimens with x=0.4 sintered at 125$0^{\circ}C$ for 3 h.125$0^{\circ}C$ for 3 h.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.2
• /
• pp.147-163
• /
• 2015

Chemical and mineralogical properties of coal ash samples from the nine thermal power plants of Korea were investigated to acquire basic data for estimating the potential of rare metal recovery. Chemical compositions of coal ash were consistent with those of average shale and foreign coal ashes. However, there were small differences between the metal contents of domestic anthracitic and imported bituminous coal ashes. Unburned coal particles were much abundant in the ash of domestic anthracitic coal. Chalcophile elements were relatively enriched in the fly ash compared to bottom ash. Silicate glass was the major component of coal ash with minor minerals such as quartz, illite (muscovite), mullite, magnetite, lime, and anhydrite. Al and Si were the major components of the glass with varying contents of Ca, Fe, K, and Mg. Glass occurred in a form of porous sphere and irregular pumace-like grain often fused with iron oxide spheres or other glass grains. Iron oxide spheres were fine intergrowth of fast-grown iron oxide crystals in the matrix of silicate glass. Chemical, microstructural, and mineralogical properties would guide successful rare metal recovery from coal ash.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.1
• /
• pp.19-25
• /
• 2013

Recent progress in Martian exploration identified hematite as the major candidate for the strong magnetic anomalies observed in Martian lithosphere. In the present study, grain-size dependence of thermoremanent magnetization and low-temperature stability of room-temperature saturation isothermal remanent magnetization (RTSIRM) were monitored using synthetic hematites. For hematite, the antiferromagnetic spin configuration is re-arranged from being perpendicular to the c-axis to be parallel to the c-axis below the Morin transition ($=T_M$). A large fraction of RTSIRM is demagnetized at $T_M$ (= 260 K) during zero-field cooling from 300 K to 10 K. About 37% of the initial RTSIRM is recovered on warming from 10 K to 300 K. Shallow Martian subsurface at 1~2 km depth would experience low-temperature cooling-warming of $T_M$ because average Martian surficial temperature is about 220 K. However in most Martian lithosphere whose temperatures are higher than 260 K, the very stable magnetic memory of hematite could be a contributor to Martian magnetic anomalies.

• Applied Biological Chemistry
• /
• v.46 no.1
• /
• pp.46-49
• /
• 2003

Paddy and milled rice quality, milling characteristics, energy consumption of milling process were investigated using Dasanbyeo, Ansanbyeo, Hwaseongbyeo, Ilpumbyeo, and Donganbyeo varieties. Thousand grains weights of the varieties dried to 15% moisture content were 22.92-28.60 g, with Dasanbyeo being the heaviest. Optimum clearance of rubber roller for obtaining maximum dehulling recovery was 30% of each rice variety thickness. At that time, perfect brown rice ratios of Dasanbyeo, Ansanbyeo, Hwaseongbyeo, Ilpumbyeo, and Donganbyeo were 95.24%, 98.86%, 95.97%, 97.75%, and 97.31%, respectively, and showed no significant differences among varieties. Ratios of removed rice bran after two times milling ranged 70.93-91.38%, with Dasanbyeo showing the highest ratio, and the average head rice ratio was 92.87%.

• The Korean Journal of Mycology
• /
• v.36 no.1
• /
• pp.51-57
• /
• 2008

To develop artificial cultivation and improve some problems such as auto-lysis on commercialization of Coprinus comatus that has been known edible and medicinal mushroom, they were conducted for selection of superior strain, suitable culture methods for mycelial growth and fruiting, and morphological characteristics of fruit body. Strain CM 980301 of Coprinus comatus was selected as a superior strain for artificial cultivation. Wheat grain and rice straw full-grown compost media were most effective for preparation of spawn and artificial cultivation of C. comatus, respectively. Spawn running of Coprinus spp. on the rice straw full-grown compost media required to be 15 days from 24 to $28^{\circ}C$. The casing layer incubation before initiation of fruit body formation, required for 13 days at same temperature for spawn running. And then require $10{\sim}11$ days for initiation and $7{\sim}8$ days for development of fruit body from 20 to $24^{\circ}C$. The fruit body of strain CM 980301 was harvested within a week from initiation of primordium formation. The hardness of pileus and stipe that were harvested in optimal stage showed 102 to 169, and 128 to $182\;g/cm^2$, respectively. Yields of srain CM 980301 from the rice straw full-grown compost media was $37.7kg/3.3m^2$. Weight of individual fruit body was 17.9 g in average.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.4
• /
• pp.247-256
• /
• 2008

For the systematic scientific management of tidal flat sediment in Julpo bay of Korea, this study conducted a survey of particle composition, organic matter(l.L) and heavy metals for three lines ; including F, R and L lines in tidal flat sediment. Particle composition of tidal flat sediments consisted predominantly of clay at F line which was in right angle direction to the coast, whereas R and L lines were located horizontally along the coast and consisted predominantly of silt. Mean grain size values of tidal flat sediments were in the range of 3.7 ${\phi}{\sim}$10.4 ${\phi}$(average 7${\phi}$). The contents of heavy metals observed at R and L lines were lower than those at F line. The correlation analysis among heavy metals, organic matter and particle size was found to have a good interrelationship. For the evaluation of heavy metals pollution, two criteria of US NOAA and KEI(in Korea) were applied Heavy metals pollution level of tidal flat sediments belonged in Non polluted and Moderately polluted groups in US EPA criteria, and its pollution levels sat below ERL in NOAA criteria. The results of heavy metals pollution level obtained by KEI criteria were found to be less than the goal level.