• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.256-259
• /
• 2003

The study of confined liquid crystals flourished in the decade of the nineties. Liquid crystals properties have been probed after confinement in well-defined or interconnected geometries as those available in porous media and in polymer networks. In this work we emphasized the power of the nuclear magnetic resonance technique to determine the confined liquid crystal structures. We also present unexpected results on the dependence of the confined liquid crystal configuration on the chain length.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.910-920
• /
• 1997

In this paper, some of the critical factors in Necking-In process are investigated using a numerical analysis. The optimal processing parameters are established and applied to the actual processes. FEM analysis is carried out based on elastic-plastic work hardening model using ABAQUS / Standard. The results obtained form the commercially available code ABAQUS / standard are compared with the experimental data and shows a good agreement with experimental data. The purpose of this paper is to search for the relations among the roller angel, feed length, and working force. Stress, strain distribution, displacement and increase in the length of the workpiece are also investigated.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 춘계학술대회 논문집
• /
• pp.209-213
• /
• 1998

This study considers flowshop scheduling problem related to flexible maufacturing cell in which consists of two machining centers, robots for loading/unloading, and an automated guided vehicle(AGV) for material handling between two machining centers. Because no machinng center has buffer storage for work in process, a machining center can not release a finished job until the empty AGV is available at that machining center. While the AGV cannot tranfer an unfinished job to a machining center until the machining center empty. In this paper, an new heuristic algorithm is given to find the sequence that minimize their makespan.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(3)
• /
• pp.173-176
• /
• 2000

This paper presents the development of an 8051-compatible microcontroller. The 8051 microcontroller is one the most popular mjcrocontroller used nowadays. All the features of the 8051, including peripherals, are implemented. The output of this work is a synthesizable RTL model that is readily available for a simple control unit in a more complex chip, such as an SOC. We put some important notes relating to the implementation of the 8051's features, including bit addressing, multiplication/division, etc.

• Journal of applied mathematics & informatics
• /
• 제32권3_4호
• /
• pp.491-502
• /
• 2014

In this paper, by using the notion of ${\rho}$-(p,r)-invexity assumptions on the functions involved, optimality conditions and duality results (Mond-Weir, Wolfe and mixed type) are established on differentiable manifolds. Counterexample is constructed to justify that our investigations are more general than the existing work available in the literature.

• 기계저널
• /
• 제16권2호
• /
• pp.122-127
• /
• 1976

It was reported in the Journal of KSME Vol. 15, No. 3 and No. 4, 1975 that could be finished the best smooth surface by applying frictional work to the metal surface. Even if we can finish the best smooth surface of methal, it is not available when it has not anti-wear. Present study tried to investigate the anti-wear and the characteristics of frictional worked surface by using the sliding contact between plain bearing of brass and frictional worked jornal of mild steel. The results were compared with the case of ground journal.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권4호
• /
• pp.399-404
• /
• 2005

In this paper, a hybrid photovoltaic fuel-cell generation system employing an electrolyzer for hydrogen generation and battery for storage purpose is designed and simulated. The system is applicable for remote areas or isolated DC loads. Control strategy has been considered to achieve permanent power supply to the load via the photovoltaic/battery or the fuel cell based on the power available from the sun. MATLAB and SIMULINK have been used for the simulation work. A sensitivity analysis is conducted for various load level based on availability of solar radiation.

• Bulletin of the Korean Chemical Society
• /
• 제23권7호
• /
• pp.971-984
• /
• 2002

The multichannel quantum defect theory (MQDT) is reformulated into the form of the configuration mixing (CM) method using the geometrical construction of the S matrix developed for the system involving two open and one closed channels. The reformulation is done by the phase renormalization method of Giusti-Suzor and Fano. The rather unconventional short-range reactance matrix K whose diagonal elements are not zero is obtained though the Lu-Fano plot becomes symmetrical. The reformulation of MQDT yields the partial cross section formulas analogous to Fano's resonance formula, which has not easily been available in other's work.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.351-354
• /
• 2002

NAPTR(Naming Authority Pointer) is a type of resource record specified IETF RFC 2915. NAPTR enables to register various services in tile domain name systems and thus Provides a way to discover services available on specific hosts. This paper describes the design and implementation of a proxy DNS system aimed at supporting NAPTRS. The goal of this work is to study on the feasibility of the service discovery registered in DNS via NAPTR records. This research result can be applied to service discovery in the resource information management for high performance GRID environments as well as to implement generic ENUM services

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2003년도 춘계학술대회
• /
• pp.285-290
• /
• 2003

There is only one server available and arriving work require services from this server. Job are processed by the machine one at a time. The most common objective is to sequence jobs on the severs so as to minimize the penalty for being late, commonly called tardiness penalty Based on other objectives, many criteria may serve as s basis for developing job schedules. Therefore, this study tries to proposed that Scheduling by customer needs group for minimizing the problem and reducing inventory, product development time, cycle time, and order lead time.