• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2001.10a
• /
• pp.199-202
• /
• 2001

This article deals with stochastic reliability systems that include a repair facility and unreliable machines: the main facility of working and an auxiliary facility of "super-reserve" machines. The number of super-reserve machines are random number with a arbitrarily distribution and working machines break down exponentially. Defective machines line up for repair, whose durations are arbitrarily distributed. Refurbished machines return to the main facility. If the main facility is restored to its original quantity, the repair facility leaves on routine maintenance until all of super-reserve machines are exhausted. Then, the busy period is regenerated. The whole system also falls into the category of closed queues, with more options than those of basic models. The techniques include two-variate Markov and semi-regenerative processes, and a duality principle, to find the probability distribution of the number of intact machines. Explicit formulas obtained demonstrate a relatively effortless use of functionals of the main stochastic characteristics (such as expenses due to repair, maintenance, waiting, and rewards for higher reliability) and optimization of their objective function. Applications include computer networking, human resources, and manufacturing processes.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.8
• /
• pp.392-401
• /
• 2001

This paper presents the single-stage high power factor AC to DC converter operated in active-clamp mode. The proposed converter is added active-clamping circuit to boost-flyback single-stage power factor corrected power supply. The active-clamping circuit limits voltage spikes, recycles the energy trapped in the leakage inductance, and provides a mechanism for achieving soft switching of the electronic switches to reduce the switching loss. The auxiliary switch of active-clamping circuit uses the same control and driver circuit as the main switch to reduce the additional cost and size. To verify the performance of the proposed converter, a 100W converter has been designed. The proposed converter gives good power factor correction, low line current harmonic distortions, and tight output voltage regulation, as used unity power factor.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.87-89
• /
• 2005

This paper proposes new series and parallel Sin+Cos PSS(power system stabilizer) for the purpose to improve the existing PSS1A's performance. The purpose of PSS is used to enhance damping of power system oscillations through injection of auxiliary signal for an excitation control terminal. The Proposed series and Parallel Sin+Cos PSS is connected adding the Sin+Cos terms additionally with serial and with parallel connection in a conventional PSS1A. The proposed controller is aim to considering of a damping of oscillation when it changes parameter fluctuations or operational load variations in a power system. The object of electric power system is KEPCO system and the voltage of power transmission line is a 154kV and a 345kV. The PSCAD/EMTDC package is used to authorize the effect of the proposed controller. Simulations were shown by and compared with the waveforms for frequency, voltage and electric power.

• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.323-331
• /
• 2018

Buck power factor correction (PFC) converters, compared with conventional boost PFC converters, exhibit high efficiency performance in the entire range of universal line voltage. This feature has gotten more attention for eliminating the zero crossing dead angle of buck PFC rectifiers. Furthermore, bridgeless structures for the reduction of conduction losses have been proposed. The aim of this paper is to introduce a single-phase buck rectifier that simultaneously has unity power factor (PF) and bridgeless structure while operating in the continuous conduction mode (CCM). For this purpose, two auxiliary flyback converters without any active switches are applied to a bridgeless buck rectifier to eliminate the zero crossing dead angle and achieve unity power factor, low total harmonic distortion (THD) and high efficiency. The operation and design considerations of the proposed rectifier are verified on a 150W, 48V prototype using a conventional peak-current-mode control. The measurement results show that the proposed rectifier has nearly unity power factor, THD less than 7% and high efficiency.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.1E
• /
• pp.56-63
• /
• 1992

The poblem of active oise control has been analysed using a adaptive signal processing technique. In this methods, the adaptive signal processor or model predicts the primary sound wave travelling along the acoustic plant and generates the secondary source 180° out of phase which attempts to attempts to attenuate the undesired noise by destructive interference. In the solutions presented here, acoustic propagation delay is considered as a part of the model which used the FIR filter. The effects of error path and auxiliary path transfer functioin are anayzed and a new on=-line technique for error path modeling, adaptive delayed inverse modeling is presented. In this study, using these new concepts, our system can more reduce the noise level in duct to 5dB-15dB than only using LMS algorithm system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.105-108
• /
• 2003

A new high speed addressing method is proposed to reduce the addressing time below lus per line in AC PDP. In this method, the priming discharge is used to achieve a high speed addressing without adding an auxiliary electrode. Two different types of priming discharges were studied to achieve a high speed addressing and also reduce the inherent light output caused by the priming discharge in order to improve the contrast ratio characteristics. In the panel experiment, the addressing was successfully done with a lus address pulse width in the new method and the better contrast ratio was achieved in the Y-A priming rather than the Y-X priming case even though the reduction of the address period was smaller than that of the Y-X priming due to the extra address time for the priming discharges.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1398-1402
• /
• 2007

In a high speed train, OBCS(On-Board Computer System) is a up-to-date computer control system that provide controlling, monitoring, maintaining and reparing of the important device, supporting a driver, status of a train, service maintenance, managing the remote control mode, driving order & control, control of a electrical or pneumatic circuit and a passenger service. In general, OBCS is located in each car but in a power car, both main and auxiliary computers are used. These avoid a network collision and maintain the independence of condition and failure records with the information of line number, train number and car number. This paper is intended to provide the information about the identification coding method of domestic and foreign OBCS, for the new high speed train (KTX-II).

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.461-469
• /
• 2010

Up to now, High speed train was widely used in France, Germany and Japan. In korea, High speed train was introduced from France train model and operation was made in year 2004. With this high speed operation Know-How, HSR-350 train was developed with our own technology. And now KTX-II which was made by our own technology are running in commercial line. High speed rolling stock system acceleration technology is train propulsion system and this is composed with traction motor, Power transfer system and auxiliary power system. This paper, introduced the performance of the traction propulsion system and other equipment that has been installed at the KTX-II will be secured.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.262-271
• /
• 2003

Specification of reinforcement method was suggested according to the ground condition and tunnelling environment such as adjacent building and surface settlement. Tunnel database consists of 8 different groups of data according to the tunnel construction situations and major problems of ground. A tunnel countermeasure expert system based on client/server system was developed with on-line. The expert system provides proper solution to the each construction sites backing up the information of the tunnelling and ground information through Internet. The effective factors of tunnel construction were shown by the analyzing relationship and partial relationship between face stability and RMR factors. This study will be very helpful to make the most of in-situ data and suggest proper applicability of tunnel reinforcement system escaping from the dependence of some experienced experts for the absent of guide.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.6
• /
• pp.854-861
• /
• 1998

The demand of LNG as a cheap and clean energy which does not cause an environmental problem has sharply been increased in Korea. In general LNG is stored in a cargo tank specially designed as a liquid state below $-162^{\circ}C$. The main engine of a LNG carrier is generally a steam boiler because LNG is a highly flammable fluid with the possibility of explosion. The main engine of a cargo ship has to be capable of the propulsion load and various auxiliary loads for the safe navigation since it is the primary energy source. Therefore the evaluation of a main boiler's energy capacity is a key design point in the planning of LNG carrier's construction. This research is to develop the computational program for the analysis of steam boiler Heat balance for LNG carrier.