• Journal of Korea Multimedia Society
• /
• v.19 no.8
• /
• pp.1505-1515
• /
• 2016

The age of autonomous vehicles has come according to development of high performance sensing and artificial intelligence technologies. And importance of the vehicle's surrounding environment sensing and observation is increasing accordingly because of its stability and control efficiency. In this paper we propose an integrated platform for efficient networking, analysis and monitoring of multiple sensing data on the vehicle that are equiped with various automotive sensors such as GPS, weather radar, automotive radar, temperature and humidity sensors. From simulation results, we could see that the proposed platform could perform realtime analysis and monitoring of various sensing data that were observed from the vehicle sensors. And we expect that our system can support drivers or autonomous vehicles to recognize optimally various sudden or danger driving environments on the road.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.3
• /
• pp.37-42
• /
• 2019

This paper presents an autonomous acceleration planning algorithm for pedestrian collision avoidance at urban. Various scenarios between pedestrians and a vehicle are designed to maneuver the planning algorithm. To simulate the scenarios, we analyze pedestrian's behavior and identify limitations of fusion sensors, lidar and vision camera. Acceleration is optimally determined by considering TTC (Time To Collision) and pedestrian's intention. Pedestrian's crossing intention is estimated for quick control decision to minimize full-braking situation, based on their velocity and position change. Feasibility of the proposed algorithm is verified by simulations using Carsim and Simulink, and comparisons with actual driving data.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.4
• /
• pp.1036-1056
• /
• 2017

The rapid increase of ageing population and chronic disease patients cause high medical expenses, and it led an increased attention to digital healthcare. Smart car technologies for healthcare have been developing to recognize drivers' status and predict diverse driving environments. The present study aimed to understand the research trends of autonomous vehicle technologies of Korea and the United States through time series analysis, network analysis, visualization, and comparison between the two countries. The results suggest that cooperative study needs to be done in common research areas such as driver's safety and algorithms. It is also needed to conduct studies and benchmark about liking technique related to part-to-part and vehicle-to-vehicle as America's competitive advantaged area. In the US, diverse approaches of autonomous vehicle technologies have used to consider the characteristics of various age groups and passengers' health status through sensor, while in Korea, only one aspect, older drivers, is mentioned. Implications for the development direction of autonomous vehicle technologies with competitiveness in considering public health, ethics, and driver's safety and convenience are discussed in detail.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.2
• /
• pp.29-35
• /
• 2018

This paper presents a quantitative evaluation method and result of moving vehicle perception using automotive radar. It is also important to analyze the accuracy of the perception algorithm quantitatively as well as to accurately percept nearby moving vehicles for safe and efficient autonomous driving. In this study, accuracy of the automotive radar-based perception algorithm which is developed based on interacting multiple model (IMM) has been verified via vehicle tests on real roads. In order to obtain experimental data for quantitative evaluation, Long Range Radar (LRR) has been mounted on the front of the ego vehicle and Short Range Radar (SRR) has been mounted on the rear side of both sides. RT-range has been installed on the ego vehicle and the target vehicle to simultaneously collect reference data on the states of the two vehicles. The experimental data is acquired in various relative positions and velocity, and the accuracy of the algorithm has been analyzed according to relative position and velocity. Quantitative analysis is conducted on relative position, relative heading angle, absolute velocity, and yaw rate of each vehicle.

• International Journal of Automotive Technology
• /
• v.5 no.2
• /
• pp.135-144
• /
• 2004

In this paper, the model-matching control in the longitudinal autonomous driving system is investigated by vehicle dynamics simulation, which contains nonlinear subcomponents and simplified subcomponents. The design of the robust model-matching controller is performed by the characteristics of the 2 degrees of freedom controller, which is composed of the feedforward compensator and the feedback compensator. It makes the characteristics of tractive and brake force to be equivalent to the specific transfer function, which is suggested as the reference model. Mathematical models of vehicle dynamic analysis including the model-matching control are constructed for computer simulation. Then, simple examples on open-loop simulation without any controller and closed loop simulation with the model-matching controller are applied to check the validity of the robust controller. As the practical example, the autonomous driving system in the longitudinal direction is adopted. It is proved that the model-matching control is effective and adequate to the disturbances and the perturbations, which are shown in the responses of the change of a vehicle mass and a road gradient.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.2
• /
• pp.180-187
• /
• 2010

In this paper, a GNSS-based AGV system was designed, and steering tested on a golf cart using electric wires in order to confirm the control efficiency of the low speed vehicle which used only position information of GNSS. After analyzed the existing AGVs system, we developed controller and steering algorithm using GNSS based position information. To analyze the performance of the developed controller and steering algorithm, straight-type and circle-type trajectory test are executed. The results show that steering performance of GNSS-based AGV system is ${\pm}\;0.2m$ for a reference trajectory.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.9
• /
• pp.813-821
• /
• 2013

In this paper, we present the development of P-SURO II hybrid AUV (Autonomous Underwater Vehicle) which can be operated in both of AUV and ROV (Remotely Operated Vehicle) modes. In its AUV mode, the vehicle is supposed to carry out some of underwater missions which are difficult to be achieved in ROV mode due to the tether cable. To accomplish its missions such as inspection and maintenance of complex underwater structures in AUV mode, the vehicle is required to have high level of autonomy including environmental recognition, obstacle avoidance, autonomous navigation, and so on. In addition to its systematic development issues, some of algorithmic issues are also discussed in this paper. Various experimental studies are also presented to demonstrate these developed autonomy algorithms.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.3
• /
• pp.230-237
• /
• 2008

Recently, lots of interest and competition in developments related to the autonomous-vehicle robot are being further increased. However, the absence of the standard architectures for effectively controlling the autonomous-vehicle robot led to many difficulties such as the long duration of development and the uncompatibility with other autonomous-vehicle robots. Accordingly, we implemented a mobile autonomous-vehicle robot system based on JAUS standard architecture. The mobile robot communicates with the remote-control system by using wireless LAN UDP/IP JAUS command massages. Its effectiveness is showed through the experimental results related to the navigation of implemented robot.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.1
• /
• pp.14-25
• /
• 2021

This paper presents a RLS based adaptive sliding mode observer (A-SMO) for unknown fault reconstruction in longitudinal autonomous driving. Securing the functional safety of autonomous vehicles from unexpected faults of sensors is essential for avoidance of fatal accidents. Because the magnitude and type of the faults cannot be known exactly, the RLS based A-SMO for unknown acceleration fault reconstruction has been designed with relationship function in this study. It is assumed that longitudinal acceleration of preceding vehicle can be obtained by using the V2V (Vehicle to Vehicle) communication. The kinematic model that represents relative relation between subject and preceding vehicles has been used for fault reconstruction. In order to reconstruct fault signal in acceleration, the magnitude of the injection term has been adjusted by adaptation rule designed based on MIT rule. The proposed A-SMO in this study was developed in Matlab/Simulink environment. Performance evaluation has been conducted using the commercial software (CarMaker) with car-following scenario and evaluation results show that maximum reconstruction error ratios exist within range of ±10%.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.773-778
• /
• 1991

In this paper we describe a road following method for an autonomous vehicle. From a road image in gray level, a road boundary is detected using a gradient operator, and then the road boundary is converted to orthogonal view of the road showing the vehicle position and heading direction. In this research an efficient road boundary search technique is developed to support real time vehicle control. Also, an obstacle detection method, using images taken from two different positions, has been developed.