• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.10
• /
• pp.104-109
• /
• 2019

Reverse engineering techniques using 3D scanners and 3D printing technologies are being used in various industries. In this paper, the three-dimensional model is designed for automotive hub parts through 3D scanning and reverse engineering, and the design of hub parts is intended to be printed on FDM-style 3D printers to measure and analyze the dimensions of hub parts designed for reverse design and 3D printed hub parts. Experimental result have shown that the dimensions of 3D printed hub parts are small compared to those of the reverse-engineered dimensions, which are due to the shrinkage of filament materials in 3D printing.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.3
• /
• pp.315-325
• /
• 2015

Smart Car market has been experiencing continuous growth to drive leading companies in automotive and IT industries to focus on advancing related technologies. As the IT technologies fuse into automotive technologies, the patent litigation has been showing changes. One of the prominent changes in patent litigation pattern of Smart Car field is the increased activities of the Non-Practicing Entities (NPEs), whose main field has been the IT area. However, the automotive companies have been mainly focusing on preventing patent disputes against competitors through trend analysis, which caused them to become relatively vulnerable to the attacks from NPEs. In this study, we developed a methodology for monitoring and analyzing the activities of NPEs using network analysis tools to suggest effective strategies for manufacturing companies to fortify their ability to respond against unanticipated attacks. Our methodology, which is developed for the Smart Car field, can also be useful for other fields such as IT and electronics.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.5
• /
• pp.553-563
• /
• 2015

Reportedly the fatality rate from secondary collision is six times higher than the average fatality rate from all traffic accidents. So prevention of the secondary collision is attracting significant attention from automotive industries. However, the secondary collision prevention systems that have been developed are not considering possibility of brake actuator failure that can occur by the impact during the initial collision. In this paper, a new system has been developed that could prevent secondary collision even in case of brake actuator failure by taking advantage of still operating actuators. In this system, a steering control is performed for maintaining a lane by using linear quadratic regulator. Additionally, the system attempts differential brake control with the remaining braking capability to stop the vehicle in the shortest distance. Through simulation in various collision scenarios, the system has demonstrated significant potential of preventing secondary collision that could otherwise have resulted in severe fatality.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.829-832
• /
• 2009

Recently, IT-centered convergence between different industries has undergone rapid expansion, accompanied by major advances in u-IT development and digital convergence. Notably, in the automotive-IT convergence sector, automotive sensors and electronic devices interact closely and intelligently with each other, thereby increasing driver safety and convenience and creating the optimal driving environment. This has led to the generation of value-added for the future-oriented automotive industry. Sensing technologies - which are used to monitor traffic situations and transmit correct information (or warnings) on the road traffic situation to car drivers, and to provide accurate information to road traffic controllers - represent both the birth of high-safety, intelligent automotive technologies and the key to automotive manufacturing. In view of these developments, this paper examines the characteristics and structure of the automotive sensor industry, and outlines the policy implications for the automotive sensor industry with regard to the development of the automotive-IT convergence industry.

• Journal of Power Electronics
• /
• v.5 no.2
• /
• pp.120-128
• /
• 2005

This paper deals with the analysis of switched reluctance motor drives for different drive circuit topologies used in automobile. So we attempt to improve the weaknesses associated with the asymmetric bridge converter in the limited internal environment of automotive application. Two kinds of c-dump converters are tested in terms of dump capacitor voltage, speed response according to the variation of advance angle and efficiency for the radiator cooling-fan drive of an automobile. They enable more economical and efficient converter topology for automobile industries. This paper describes the performance characteristics of 12V-250W-3000rpm SRM drives for automotive application. Computer simulation and experiment results are then presented to verify the performance of the two kinds of c-dump converters.

• Transactions of Materials Processing
• /
• v.19 no.1
• /
• pp.32-37
• /
• 2010

Hydroforming has attracted a great deal of attention in the manufacturing industries for vehicles and transportation systems. Hydroforming technology contributes to weight reduction, increased strength, improved quality and reduced tooling cost. Hydroformed automotive parts used as structure components in vehichle body frame often have to be structurally joined at some point. Therefore it is useful if the hydroformed automotive parts can be given a localized attachment flange. For a given flange shape, a parting plane for the dies is established relative to which the various surfaces of the flange shape, in cross section, have no significant reverse curvature. In this study, hydroforming process for flange forming was proposed. FE analysis to form flanged circular shape and flanged rectangular shape was preformed with Dynaform 5.5. To accomplish successful hydroforming process design, thorough investigation on proper combination of process parameters such as tool geometry and hydraulic pressure has been performed and optimized. The results show that flanged automotive parts can be successfully produced with tube hydroforming.

• International Journal of Automotive Technology
• /
• v.3 no.4
• /
• pp.147-155
• /
• 2002

Mechatronic subsystems are more and more developed in automotive industries. To enhance the local controls performances, a cooperative control between ABS and Suspension systems is proposed. The respective controls are first designed separately with their dedicated models. Then a hybrid hierarchical architecture is developed. The advantage of this architecture is discussed through vehicle performance with simulation results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.5
• /
• pp.188-194
• /
• 2001

Metal matrix composites with whisker reinforcements have significant potential for demanding mechanical applications including defense, aerospace, and automotive industries. Especially, metal matrix composites, which are reinforced with aluminum borate whisker, have been used for the part of piston head in automobile because of good specific strength and wear resistance. Aluminum alloy-based metal matrix composites with whisker reinforcements have been produced using squeeze casting method, which is kind of an infiltration method. In this study, AC4CH-based metal matrix composites with $Al_{18}B$_4$O_{33}$ reinforcement have been produced using squeeze casting method, after T6 heat treatment, we evaluated mechanical properties of matrix and MMC composite were evaluated.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.4
• /
• pp.247-255
• /
• 2016

Sheet metal-forming processes such as stamping, deep drawing, bending, shearing, hydroforming, hydromechanical deep drawing, rubber forming, and incremental forming have been widely used in the automotive, aircraft, and ship-building industries. With the expansion of the automotive industry, research on these processes has been remarkably developed in Korea since the 1980s. Here, we review the history of this research as well as recent trends in sheet metal-forming processes. This overview focuses specifically on the results of research in Korea and on the works of Professor D.Y. Yang, in honor of his retirement.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.3
• /
• pp.184-191
• /
• 2003

HILS(Hardware-ln-the-Loop Simulation) is a scheme that incorporates hardware components of primary concern in the numerical simulation environment. Due to its advantages over actual vehicle test and pure simulation, HILS is being widely accepted in automotive industries as test benches for vehicle control units. Developed in this study is a HILS system for VDC(Vehicle Dynamics Control) with a valve control system that modulates the brake pressures at low wheels. Two VDC control logics were developed and tested in the HILS system. Test results under various driving conditions are presented in this paper.