• Environmental and Resource Economics Review
• /
• v.31 no.3
• /
• pp.419-449
• /
• 2022

This paper aims to quantify the potential economic burdens of EU's carbon border adjustment mechanisms faced by Korean domestic industries. In addition, this study tries to compare and analyzes changes in the burden of each industry resulted from the implementation of the domestic low-carbon policy. Based on the quantitative findings, we intend to suggest policy implications for establishing mid- to long-term strategies in response to climate change risks. Based on the environmentally extended input-output analysis, the total economic burdens of the domestic industries due to the EU's carbon border adjustment mechanisms are estimated to be approximately KRW 8,245.6 billion in 2030. Looking at the impacts by industry, it is found that major industries such as petrochemicals, petroleum refining, transportation equipment, steel, automobiles, and electric/electronic equipment industries are expected to account for 84.3% of the total potential burdens. In addition, in multiple policy scenarios assuming technological developments and energy transition following the implementation of domestic low-carbon policies, the total economic burden of carbon border adjustment is expected to decrease by about 11.7% to 15.0%. The main result of this study suggests that we should not view EU EU's carbon border adjustment mechanism as a trade regulation, but to use it as a momentum for more effective implementation of the low-carbon and energy transition strategies in the global carbon neural era.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_2
• /
• pp.729-735
• /
• 2021

Recently Artificial Intelligence(AI) has been developed and used in various fields. Especially AI recognition technology can perceive and distinguish images so it should plays a significant role in quality inspection process. For stability of autonomous driving technology, semiconductors inside automobiles must be protected from external electromagnetic wave(EM wave). As a shield film, a thin polymeric material with hole shaped micro-patterns created by a laser processing could be used for the protection. The shielding efficiency of the film can be increased by the hole structure with appropriate pitch and size. However, since the sensitivity of micro-machining for some parameters, the shape of every single hole can not be same, even it is possible to make defective patterns during process. And it is absolutely time consuming way to inspect all patterns by just using optical microscope. In this paper, we introduce a AI inspection system which is based on web site AI tool. And we evaluate the usefulness of AI model by calculate Area Under ROC curve(Receiver Operating Characteristics). The AI system can classify the micro-patterns into normal or abnormal ones displaying the text of the result on real-time images and save them as image files respectively. Furthermore, pressing the running button, the Hardware of robot arm with two Arduino motors move the film on the optical microscopy stage in order for raster scanning. So this AI system can inspect the entire micro-patterns of a film automatically. If our system could collect much more identified data, it is believed that this system should be a more precise and accurate process for the efficiency of the AI inspection. Also this one could be applied to image-based inspection process of other products.

• Journal of the Korean Society of Safety
• /
• v.38 no.3
• /
• pp.77-84
• /
• 2023

Welding and cutting, which are representative tasks in handling firearms at industrial sites, are the basis for production and maintenance processes across all industries. They are also essential in the root industry. Specifically, they are widely used in the manufacturing industry, including equipment industries such as shipbuilding, automobiles, and chemicals, and subsequent maintenance work and general facility repair. However, such hot work carries a high fire risk owing to sparks scattering and inadequate management, resulting in a high occurrence of accidents. In response, the government and relevant organizations have recently revised the Occupational Safety and Health Act to prevent accidents during hot work. These revisions impose more stringent regulations than before, which are expected to help prevent actual fire accidents. However, whether the fire observer system, which is the core element of the revision, would be practically applied and maintained is unclear. Therefore, this study compared the fire observer system in the revised Occupational Safety and Health Act with those in the laws and systems of developed countries, conducted interviews with safety and health experts to assess the suitability of the new system for fire observer operations, and improvement plans were derived accordingly. Therefore, the laws and systems of developed countries grant more authority to fire observers compared with those of Korea. Moreover, professional training in handling emergency is required. Interviews with safety and health experts revealed that regardless of company size, the same operating standards were applied, and standards for deploying fire observers in various locations were unclear. Furthermore, there was a lack of professional education and training, and the role and authority of fire observers were limited. These findings revealed a problem in this sector. The results of this study are expected to serve as basic data for establishing a practical system for placing fire observers and supplementing laws, guidelines, and systems for preventing fire accidents.

• Journal of Platform Technology
• /
• v.11 no.2
• /
• pp.54-65
• /
• 2023

Due to the nature of electric vehicles, the batteries used for electric vehicles have a very large rated capacity. If an electric vehicle runs for a long time or an electric vehicle is abandoned due to a traffic accident, the electric vehicle battery becomes a waste battery. Even in vehicles that are being abandoned, the remaining capacity of waste batteries for electric vehicles is sufficient for other purposes. Waste batteries for automobiles are very expensive, so they need to be recycled and reused, but there was a problem that the standards for measuring the performance grade of waste batteries for recycling and reuse were insufficient. As a method for measuring the remaining capacity of waste battery, the most stable and reliable method is to measure the remaining capacity of battery using full charge and discharge. However, the inspection method by the full charging and discharging method varies depending on the capacity of the battery, but it takes more than a day to inspect, and many people are making great efforts to solve this problem. In this paper, an electric vehicle battery residual capacity analysis technique using voltage deviation between cells was studied and analyzed as a method to reduce inspection time for electric vehicle batteries. To this end, a full charging and discharging-based capacity measurement system was constructed, experimental data were collected using a nose or waste battery, and the correlation between the voltage deviation and the remaining capacity of the battery pack was analyzed to verify whether it can be used for battery inspection.

• Clean Technology
• /
• v.29 no.2
• /
• pp.87-94
• /
• 2023

The recovery of valuable metals from waste lithium-based secondary batteries is very important in terms of efficiently utilizing earth's limited number of resources. Currently, the cathode material of a LiFePO₄ battery, a type of battery which is widely used in automobiles, contains approximately 5% lithium. After use, the lithium in these batteries can be used again as a raw material for new batteries through lithium recycling. In this study, low-concentration sulfuric acid, a commonly used type of inorganic acid, was used to selectively leach the lithium contained in a waste LiFePO₄ cathode material powder. In addition, in order to compare and analyze the leaching efficiency and separation efficiency of each component, the optimalleaching conditions were derived by applying a two-step leaching process with pulp density being used as a variable during leaching. When leaching with pulp density as a variable, it was confirmed that at a pulp density of 200 g/L, the separation efficiency was approximately 200 times higher than at other pulp densities because the iron and phosphorus components were hardly leached at this pulp density. Accordingly, the pulp density of 200 g/L was used tooptimize the leaching conditions for the selective leaching and recovery of lithium.

• Journal of Service Research and Studies
• /
• v.11 no.3
• /
• pp.43-54
• /
• 2021

This study focused on indoor spaces and convenience devices among vehicle interior designs suitable for the autonomous driving era, and presented an interior design model for future automobiles by applying the STEEP analysis method. The service design methodology is applied to deal with changes in display devices installed for the purpose of rearranging layouts and providing driver-centered information. Changes in types and installation locations of displays for various purposes such as connected and infotainment are expected. In particular, through this analysis, trends and experiences through indoor interior research in future self-driving cars will be studied, and subsequent studies will be used as basic data for actual development and application. Key drivers were extracted after deriving future trends linking the research project conducted in five stages to STEEP and consulting experts through FGI. Through this, it was later presented as a direction for indoor design. Through user-centered participatory design methods, emotional keyword derivation methods were used, summarized the derived drivers in five major trends in the future society, and each derived drivers were grouped to consider the relevant technology fields, and added elements to the autonomous driving level. This is an indoor ray viewed from the perspective of various social issues as well as personal tendencies in the future self-driving car industry.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.3
• /
• pp.78-82
• /
• 2023

A fabrication of smart windows with controllable visible light transmittance in three steps by using λ/2 retardation films based on a reactive mesogen (RM) material and polarizing films is demonstrated. The phase retardation films with a Δn·d value of λ/2 (λ: wavelength) convert the direction of a traveling light to the optical axis of the film symmetrically. In this work, the retardation characteristics according to the RM thickness were evaluated and henceλ/2 phase retardation film can be fabricated. The phase retardation film with Δn·d of 276.1 nm, which is close to λ/2 (=275 nm @550 nm), was fabricated. The light transmittance of a smart window with the structure of (polarizing film)/(glass)/(alignment layer)/(λ/2 retardation film) was measured in the transmission mode, half mode and blocking mode. The evaluation results show that the transmittance of the smart window can be controlled in three steps with 35.8%, 27.8%, and 18.2% at each mode, respectively. In addition, by fabricating a smart window with a size of 15×200 mm², the feasibility of use in various fields such as buildings and automobiles was verified.

• Information Systems Review
• /
• v.25 no.4
• /
• pp.113-130
• /
• 2023

Due to economic development and increasing gross national income, the number of automobiles continues to rise, leading to a serious issue of illegal parking due to limited road conditions and insufficient parking facilities. Illegal parking causes significant inconvenience and displeasure to people and can even result in accidents and loss of lives. The severity of accidents and their consequences, related to the growing number of vehicles and illegal parking, is escalating, particularly in the metropolitan areas. Consequently, efforts are being made to address this problem as a cause of social issues and come up with measures to reduce illegal parking. In particular, half of the public complaints in the metropolitan area are related to illegal parking, and the highest physical and human damage occurs in Gyeonggi. Thus, this study aims to use machine learning techniques based on data related to illegal parking in Suwon city, Gyeonggi, to categorize regional characteristics and propose effective measures to crack down on illegal parking. Additionally, practical, social, policy, and legal measures to decrease illegal parking in the metropolitan area are suggested. This study has academic significance in that it solved the problem of illegal parking, which is mentioned as one of the social problems that cause traffic congestion, by classifying regional characteristics using K-prototype, a machine learning algorithm. Furthermore, the results of this study contribute to practical and social aspects by providing measures to decrease illegal parking in the metropolitan area.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.6
• /
• pp.413-419
• /
• 2023

Light Emitting Diodes(LEDs) are widely utilized not only in lighting but also in various applications such as mobile phones, automobiles, displays, etc. The integration of LED lighting with communication, specifically Visible Light Communication(VLC), has gained significant attention. This paper presents the direct implementation and experimentation of a Vehicle-to-Vehicle(V2V) Visible Light Communication system using commonly used red and yellow LEDs in typical vehicles. Data collected from the leading vehicle, including positional and speed information, were modulated using Non-Return-to-Zero On-Off Keying(NRZ-OOK) and transmitted through the rear lights equipped with red and yellow LEDs. A photodetector(PD) received the visible light signals, demodulated the data, and restored it. To mitigate the interference from fluorescent lights and natural light, a PD for interference removal was installed, and an interference removal device using a polarizing filter and a differential amplifier was employed. The performance of the proposed visible light communication system was analyzed in an ideal case, indoors and outdoors environments. In an outdoor setting, maintaining a distance of approximately 30[cm], and a transmission rate of 4800[bps] for inter-vehicle data transmission, the red LED exhibited a performance improvement of approximately 13.63[dB], while the yellow LED showed an improvement of about 11.9[dB].

• Journal of Internet Computing and Services
• /
• v.25 no.1
• /
• pp.109-121
• /
• 2024

In various manufacturing processes such as textiles and automobiles, when equipment breaks down or stops, the machines do not work, which leads to time and financial losses for the company. Therefore, it is important to detect equipment abnormalities in advance so that equipment failures can be predicted and repaired before they occur. Most equipment failures are caused by bearing failures, which are essential parts of equipment, and detection bearing anomaly is the essence of PHM(Prognostics and Health Management) research. In this paper, we propose a preprocessing algorithm called SWT-SVD, which analyzes vibration signals from bearings and apply it to an anomaly transformer, one of the time series anomaly detection model networks, to implement bearing anomaly detection model. Vibration signals from the bearing manufacturing process contain noise due to the real-time generation of sensor values. To reduce noise in vibration signals, we use the Stationary Wavelet Transform to extract frequency components and perform preprocessing to extract meaningful features through the Singular Value Decomposition algorithm. For experimental validation of the proposed SWT-SVD preprocessing method in the bearing anomaly detection model, we utilize the PHM-2012-Challenge dataset provided by the IEEE PHM Conference. The experimental results demonstrate significant performance with an accuracy of 0.98 and an F1-Score of 0.97. Additionally, to substantiate performance improvement, we conduct a comparative analysis with previous studies, confirming that the proposed preprocessing method outperforms previous preprocessing methods in terms of performance.