• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.629-634
• /
• 2000

Dynamic behavior of an automatic dynamic balancer is analyzed by a theoretical approach. Using Lagrange's equation, we derive the non-linear equations of motion for an automatic dynamic balancer equipped in a rotor with the bending flexibility with respect to the rectangular coordinate. Considering the rotor bending flexibility we analyze out-of-plane vibrations as well as in-plane vibrations of the automatic dynamic balaner. The time responses are computed from the non-linear equations by using a time integration method. We also investigate the effect of rotor flexibility on the behavior of the automatic dynamic balancer

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.119-131
• /
• 1997

Ball type automatic balancer is used to reduce the vibration caused by unbalance of rotor. In this study, A analytic modeling of a front loaded washing machine with ball type automatic balancer has been suggested theoretically and ADAMS has been used to analyze the dynamic characteristics of automatic balancer. It is found from simulation and experimental results that the automatic balancer suppress the steady state vibration of the washing machine effectively. The test results match well with the simulation results of ADAMS, thereby the dynamic model of ADAMS can be used as virtual prototype to predict the vibration characteristics which could be changed by the modification of design variable and can reduce the design cycle sharply. To maximize the balancing effect of automatic balancer, the friction between balls and race and the deviation between geometric center and rotation center of drum need to be minimized and the optimum design for the stiffness of flange shaft and the angular acceleration of drum should be achieved.

• ETRI Journal
• /
• 제43권6호
• /
• pp.1049-1057
• /
• 2021

Automatic spacing in Korean is used to correct spacing units in a given input sentence. The demand for automatic spacing has been increasing owing to frequent incorrect spacing in recent media, such as the Internet and mobile networks. Therefore, herein, we propose a transformer encoder that reads a sentence bidirectionally and can be pretrained using an out-of-task corpus. Notably, our model exhibited the highest character accuracy (98.42%) among the existing automatic spacing models for Korean. We experimentally validated the effectiveness of bidirectional encoding and pretraining for automatic spacing in Korean. Moreover, we conclude that pretraining is more important than fine-tuning and data size.

• Journal of Information Processing Systems
• /
• 제18권6호
• /
• pp.755-762
• /
• 2022

The existing electrical engineering design method and the dynamic objective function in the application process of automatic control system fail to meet the unbounded condition, which affects the control tracking accuracy. In order to improve the tracking control accuracy, this paper studies the electrical engineering design method based on neural network and the application of automatic control system. This paper analyzes the structure and working mechanism of electrical engineering automation control system by an automation control model with main control objectives. Following the analysis, an optimal solution of controllability design and fault-tolerant control is figured out. The automatic control power coefficient is distributed based on an ideal control effect of system. According to the distribution results, an automatic control algorithm is based on neural network for accurate control. The experimental results show that the electrical automation control method based on neural network can significantly reduce the control following error to 3.62%, improve the accuracy of the electrical automation tracking control, thus meeting the actual production needs of electrical engineering automation control system.

• 한국도서관정보학회지
• /
• 제15권
• /
• pp.113-151
• /
• 1988

The enumerative classification schemes do not represent the tiny mass of knowledge embodied in a article in a periodical or in a chapter or a paragraph of a book. But today's information centers regard a tiny spot of knowledge embodied in a article as a class. we call this micro-thought. But the enumerative classification are manual systems, it cannot be a n.0, pplied to the automation of classification. The purpose of this study is to build a general principle for the automatic book-classification which can be put to use in library operation, and to present a methodology of the automatic classification for the library. The methodology used is essentially theoretical, Published works by and about Ranganathan, especially 6th edition of the CC were studied, analyzed. The principle of automatic book classification derived from the analysis of colon classification and facet combinations. The results of this study can be summarized as follows ; (1) This study confined the fields of library science and agriculture. (2) This study represent a general principles for the automatic book classification of library science and agriculture. (3) Program flowcharts are designed as a basis of system analysis and program procedure in library science and agriculture. (4) The principles of the automatic classification in library, science is different from that of agriculture. (5) Automatic book classification can be performed by the principle of faceted classification, by inputting the title and subject code into a computer. In addition, the expected value from the automatic book-classification is as follows (1) The prompt and accurate of classification is possible. (2) Though a book is classified in any library, it can have same classification number. (3) The user can retrieve the classification code of a book for which he or she wants to search through dialogue with the computer. (4) Since the concept coordination method is employed, a tiny mass of knowledge embodied in a article in a periodical or in a chapter or a paragraph of a book can be represented as a class. (5) By performing automatic book-classification, the automation of library operation can be completed.

• 한국기계연구소 소보
• /
• 통권17호
• /
• pp.93-97
• /
• 1987

This paper is concerned on kinematic analysis and simulation of an automatic feeding mechanism and a curved inverse earn. The main objective is the development 0 fan algorithm of the earn-feeding mechanism and a CAD program. The computer program CACAFS (Computer-Aided Cam and Automatic Feeding System) is developed by using the state-of-the-art for CAD. Thus, the program CACAFS is independent of computer hardwares and also interactive. As the second part of paper, this paper introduces the technique for the mechanism simulation and graphics-oriented CAD programming. The first part of r paper presents the algorithm to analyze the motion of the inverse earn and the automatic feeding mechanism.

• 한국기계연구소 소보
• /
• 통권17호
• /
• pp.83-91
• /
• 1987

This paper is concerned on kinematic Analysis and Simulation of an automatic feeding mechanism and a curved inverse cam. The main objective is the development of an algorithm of the cam-feeding mechanism and a CAD program. The computer program CACAFS (Computer-Aided Cam and Automatic Feeding System is developed by using the state-of-the-art for CAD. Thus, the program CACAFS is independent of computer hardwares and also interactive. As the first part of paper, this paper introduces the algorithm to analyze the motion of the inverse cam and the automatic feeding mechanism. The second part of paper presents the technique for the mechanism simulation and graphics-oriented CAD programming.

• 한국CDE학회논문집
• /
• 제1권1호
• /
• pp.65-75
• /
• 1996

This paper describes an automatic finite element(FE) mesh generation for three-dimensional structures consisting of free-form surfaces. This mesh generation process consists of three subprocesses: (a) definition of geometric model, i.e. analysis model, (b) generation of nodes, and (c) generation of elements. One of commercial solid modelers is employed for three-dimensional solid and shell structures. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well controlled by the fuzzy knowledge processing. The Delaunay method is introduced as a basic tool for element generation. Automatic generation of FE meshes for three-dimensional solid and shell structures holds great benefits for analyses. Practical performances of the present system are demonstrated through several mesh generations for three-dimensional complex geometry.

• 한국컴퓨터정보학회논문지
• /
• 제9권1호
• /
• pp.17-23
• /
• 2004

소프트웨어 자동 테스팅 도구를 이용하여 테스트 프로세스의 전부 또는 일부를 자동화함으로써 테스트시간의 단축과 테스트 비용을 줄일 수 있다 그러나 하나의 테스팅 도구를 이용하여 이질적인 컴퓨팅 환경에서 다양한 종류의 테스트 요구 사항을 모두 충족시킨다는 것은 현실적으로 불가능하다 본 논문에서는 소프트웨어 자동 테스팅 도구의 분류 기준을 제시하고, 이를 기반으로 상용화된 테스팅 도구들의 특성을 조사, 분석하여 테스팅 도구의 발전 로드맵을 제시함으로써 테스팅 도구들 상호간의 관계성 이해와 향후 테스팅 도구들의 발전 방향을 모색하고자 한다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.149-154
• /
• 2003

The blister packaging is applied to many fields in recent years for its merit that it enable consumer to see the products. The most of battery packaging are blister type. However, the lithium battery is dealt with very carefully in packaging because of its explosion. The existing packaging machines for lithium battery are mostly adapted alkaline packaging machine and their capacity is very inferior to other process, either. In this paper, the virtual prototype of the automatic blister packaging system for lithium battery which has new mechanism and 240A/min capacity is developed and its performance is evaluated.