• 전기학회논문지
• /
• 제68권1호
• /
• pp.199-206
• /
• 2019

Recently, an expansion of safety facilities has been widely applied to effectively manage the safety of train operation due to increase of the high-speed section of the general railway and the introduction of high-speed train. Accordingly, performance improvement, upgrading and high reliability of existing safety devices are required. the dragging detector, one of the safety devices, is an analogue system that consists of closed circuit with an electric current flows and operates when the closed circuit is opened by the impact of the dragging object. Such method has unreasonable problem that should be replaced after being detected. It is need to replace with an automatic return type dragging detector which is easy to maintain. In addition, it is necessary to develop a dragging detector that applicable to general railway and urban railway including high-speed railway, in accordance with the speeding up and densification of trains, although it is currently applied only to high-speed railway. In this paper, we propose an automatic return type dragging detector which has versatility and excellent maintainability with digital sensor and real time monitoring.

• 한국기계가공학회지
• /
• 제5권2호
• /
• pp.49-55
• /
• 2006

In the consideration of the problem occurred by certain return bender brazing welding works that depend only on handworks, the automatization of the whole production line is impossible due to the high dependency of skillful workers. In addition, it is difficult to establish a standardization due to the various heat exchanger model and irregular amount of orders, and the fault reduction is also impossible due to the severe difference in brazing conditions. It is necessary to develop a method, which quantitively analyzes the problem existed in this manual brazing welding of return benders and technically solves that problem, and to lead the improvement of the productivity and cost reduction in order to increase the business competitive power. Then, this will contribute the technical development of automatic welding for Korea's heat exchanger businesses. Thus, this study develops an automatic technology, which automatically controls the flame strength using digital control methods, for various models and produces a sample model. It is possible to increase the productivity and produce uniformed and qualified products by solving the problem existed in manual processes using the developed automatic return bender brazing system. In addition, the brazing condition can be automatically controlled according to the model and line speed, and such an economical operation can reduce the production cost. The developed system is expected to future applications not only heat exchangers in the field of refrigeration and air conditioning, but also other various industrial fields that apply heat exchangers, such as car and boiler industries.

• 한국주거학회논문집
• /
• 제13권6호
• /
• pp.89-99
• /
• 2002

The purpose of this research is to analyze the characteristics of flow rate distribution in hot-water piping networks in the apartment building. A 14-story apartment house was selected as a sample building and analyzed numerically by Hardy-Cross method. Two different piping networks, one has three vertical zones and the other of a single zone with automatic balancing valves, were compared. Some of research results are as follows; As the temperature of supply hot-water increases, the flow rate of it does by buoyancy effect, but this effect is not found in the piping network with automatic balancing valves. Non-uniformity in hot-water flow distributions to all stories in the piping system of single vertical zone can be completely reformed by the installation of either manually operated or automatic balancing valves in every story.

• 한국ITS학회 논문지
• /
• 제16권5호
• /
• pp.109-120
• /
• 2017

자동차 운전면허 시험에서 객관적인 평가가 중요하다. 특히 도로 주행시험은 실제 도로에서 운전능력, 규칙준수, 상황판단능력 등을 종합적으로 시험하는 것이다. 이를 위하여 본 논문에서는 GPS와 센서 데이터 및 기기조작 정보를 활용하여 운전면허 시험의 자동채점시스템을 제안한다. 자동채점 시스템은 차량탑재장치, 채점용단말, 데이터 제어장치, 데이터 저장 및 처리를 위한 서버로 구성되어 있다. 차량탑재장치는 차량에 설치된 센서 데이터를 수집한다. 채점 단말은 차량탑재장치로부터 받은 데이터를 활용하여 기준에 따라 자동채점 한다. 또한 이동 중에 GPS 오차로 인하여 차량이 도로를 벗어나 표현되므로 지도매칭 기법과 경로이탈 및 복귀 알고리즘을 적용하였다. 이 시스템은 기존 시험 채점 방식과 달리 자동 채점이 가능하며, 시험 결과에서 정확한 차량위치 표시와 GPS 음영지역을 벗어났을 때 10초 이내로 경로 복귀를 하였다. 이 시스템은 도로 주행 교육에도 활용될 수 있을 것으로 기대된다.

• Current Research on Agriculture and Life Sciences
• /
• 제32권3호
• /
• pp.165-169
• /
• 2014

계란 세척기 평가 금액 추정 결과는 다음과 같다. 계란 세척기 총수입(인건비 절감으로부터의 조수입 증대)에서 산정하였으며, 계란 세척기 총비용은 구입가격, 고정비용 및 유동비용의 합계로 나타내었다. 계란 세척기 평가액은 할인율 수준에 따라 최소 44,778천원(할인율 10%)에서 최대 45,778천원(할인율 5%), 평균 45,278천원으로 추정된다(Table 7). 계란세척기의 경제적 타당성을 살펴보면, 내부수익율 IRR의 값은 가정했던 할인율(5%~10%)보다 훨씬 높고, 순현재가치(NPV)는 0보다 훨씬 크며, B/C 비율도 1.0 이상으로 나타나 계란 세척기 개발사업의 경제적 타당성은 있는 것으로 판단된다(Table 8).

• 수산해양기술연구
• /
• 제59권2호
• /
• pp.181-187
• /
• 2023

Laver aquaculture, which occupies a large proportion in the aquaculture industry in Korea, is still highly dependent on human labor. Therefore, it is necessary to study the development of an automatic system to improve the working environment and increase the efficiency of aquaculture production systems. The purpose of this study is to evaluate the economic feasibility of an improved system in a study for the loading-unloading and automatic weighing systems in laver aquaculture industry. Economic analysis of the developed unloading and automatic weighing system were implemented under various conditions to calculate more accurate benefits and costs. As a result of this study, the economic feasibility was found to be very high in the three models: net present value (NPV), benefit-cost ratio (B/C), internal rate of return (IRR). Moreover, the results of sensitivity analysis showed that the economical efficiency of the automatic loading, unloading, and weighing system in laver aquaculture was very high.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1209-1214
• /
• 2009

Various automatic temperature control systems have been used widely in Korea for the conservation of heating energy and the enhancement of thermal comfort in residential buildings. But the heating control performance for automatic temperature control systems extensively vary with the design and operational conditions of the heating system, the climate condition and others. It was introduced in this study a numerical calculation program package to analyze heating control characteristics of the automatic temperature control system. This package is able to analyze the room air temperature, return water temperature, supplied heating flux and flow rate, and so on. One the other hand, the simulation results were verified by comparing with the field test results.

• Journal of Chest Surgery
• /
• 제28권6호
• /
• pp.542-548
• /
• 1995

The goal of this study is to develop an effective control system for cardiac output regulation based upon the preload and afterload conditions without any transducers and compliance chambers in the moving actuator type total artificial heart. Motor current waveforms during the actuator movement are used as an input to the automatic control algorithm. While the current waveform analysis is performed, the stroke length and velocity of the actuator are gradually increased up to the maximum pump output level. If the diastolic filling rate of either right or left pump begins to exceed the venous return, atrial collapse will occur. Since the diastolic suction acts as a load to the motor, this critical condition can be detected by analyzing the motor current waveforms. Every time this detection criterion is met, the control algorithm decreases the stroke velocity and length of the actuator step by step just below the critical detection level. Then, they start to increase. In this way the maximum pump output under given venous return can be achieved. Additionally the control algorithm provides some degree of afterload sensitivity. If the aortic pressure is detected to exceed 120 mmHg, the stroke length and velocity decrease in the same way as the response to the preload. Left-right pump output balance is maintained by proper adjustment of the asymmetry of the stroke angle. In the mock circulatory test, this control system worked well and there was a considerable range of stroke volume difference with adjustment of the asymmetry value. Two ovine experiments were performed. It was confirmed that the required cardiac output regulation according to the venous return could be achieved with adequate detection of diastolic function, at least in the in vivo short-term survival cases[2-3 days . We conclude that this control algorithm is a promising method to regulate cardiac output in the moving actuator type total artificial heart.

• Current Research on Agriculture and Life Sciences
• /
• 제32권4호
• /
• pp.231-235
• /
• 2014

이 연구는 파각란 선별기 도입을 비용 편익분석 목적으로 수행되었다. 계란 파각란 선별기를 도입할 때의 총수입과 총비용 평가액의 추정결과는 다음과 같다. 총비용의 경우 구입가격, 고정비용 및 유동비용의 합계로 나타내었고, 할인율에 따라 5%, 10%일 때 각각 232,904천원과 242,904천원으로 산정되었다. 계란 파각란 선별기 평가액은 할인율에 따라 228,543천원(할인율 5%인 경우)과 218,543천원(할인율 10%인 경우)으로 추정되었다(Table 6). 파각란 선별기 기술가치에 대한 평가는 B/C비율, 순현재가치(NPV), 내부수익율(IRR)의 값으로 판단되었고, 내부수익율 IRR의 값은 가정했던 할인율보다 훨씬 높게 나타났고, 순현재가치도 0보다 큰 값으로 나타났으며, B/C비율도 1.0 이상으로 나타나 경제적 타당성을 가지는 것으로 판단되었다(Table 7).

• 무역상무연구
• /
• 제16권
• /
• pp.7-34
• /
• 2001

This Study analyzes the fact that whether or not, the applicant, by failing to object promptly to the facial discrepancies of the presented documents and to return those documents to the issuing bank, has waived his right to sue for breach of the Application agreement based on the recent Korea-US Case law. Some commentators claim that an applicant has a duty to notify the issuing bank within a reasonable time after receiving the documents that they do not comply with the letter of credit requirements and to return those documents to the issuing bank, and also suggest that a failure to do so result in a waiver of discrepancies that operates as a matter of law. But such decisions make little sense in letter of credit transaction. Unless otherwise agreed, Applicant agreement does not require that the applicant notify the issuing bank of any facial discrepancies of the documents or return those documents. Moreover there is no support in the body of law, i.e., UCP 500 or the Revised UCC Article 5, for an automatic waiver or preclusion arising from the applicant's failure to object promptly. In addition, beyond the lack of authority to support an automatic waiver arising from the applicant's failure to object and return the documents, in a letter of credit transaction the issuing bank is the only party charged with the duty of scrutinizing documents. Therefore, if there are discrepancies, it is the bank that should have to seek an express waiver from the applicant ; the issuing bank should not avoid responsibility for failing to notice discrepancies because the applicant was slow to scrutinize the documents closely or because the applicant failed to inform the issuing bank of such discrepancies. Requiring that applicants inspect documents independently defeats the purpose of retaining the issuing bank, erodes the bank's responsibility to perform its role diligently, and may result in the bank avoiding liability despite negligent payment. If the bank wants to require an applicant to report discrepancies promptly, he may include a provision in the Application agreement limiting the time limit within which the applicant must give notice of facial discrepancies and return the documents. This approach will ensure the continued wide-spread use of documentary credit as a reliable payment mechanism.