• Journal of Advanced Navigation Technology
• /
• v.19 no.6
• /
• pp.465-472
• /
• 2015

In order to improve the performance of TCAS it should improve the performance of the sensor, which transmits a variety of information. In this paper, To improve the performance of the existing radar sensors such as being used in behalf of the next generation air traffic control system, ads-b the applied. In addition, ADS-B in a high precision by using information from the correction GPS system, SBAS assume would be able to apply an improved location accuracy for TCAS and analyzed TCAS and ADS-B. Played the simulation results, TCAS equipment receives the help of these ADS-B can calculate a CPA to determine the position of the aircraft in advance, and it was confirmed that it is possible to reduce the unnecessary RA operation, also, the pilot reduction and the workload, it has advantages such as fuel consumption and time associated with the reduced operation unnecessary RA was confirmed.

• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.4
• /
• pp.257-263
• /
• 2017

The following thesis researched into the characteristics of electrolytic ion water with different levels of electrical conductivity by adding NaCl into tap water which is for experimental use in multi-layered electrolytic ion water generator. Electrolytic ion water is generated by underwater electrolysis and the electrolysis generator has a simple structure, is easy to control and is highly utilized in industries. Electrolytic ion water is useful in many areas since it has a superior sterilizing power, has no possibility of secondary pollution itself as water and removes active oxygen. In the experiment, we used tap water with NaCl excluded and water with three different levels of electrical conductivity by changing NaCl concentration levels into three levels. The features of current and voltage in electrolytic ion water represented a form of quadric instead of the linear characteristic following ohm's law. As well, as the electric conductivity of water and applied voltage increased, we were able to generate much stronger acid water and alkali water.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.618-622
• /
• 2008

In this paper, we suggest new music composition algorithm based on fractal theory. User can define and control fractal shape by setting an initial state and production rules in L-System. We generate an asymmetric fractal tree based on L-System and probability. Then a music is generated by the fractal tree image using sonification techniques. We introduce two composition algorithm using the fractal tree. First, monophonic music can be generated by mapping x and y axis to velocity and pitch, respectively Second, harmonic music also can be generated by mapping x and y axis to time and pitch, respectively Using our composition algorithm, user can easily generate a music which has repeated pattern created by recursive feature of fractal, and a music which has structure similar to fractal tree image.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.179-182
• /
• 2003

This study is about the development of a system related to the CATV network. It intends to develop an automatically centralized Headend system and a distributive system to remove the ineffectiveness of the established manual system. To achieve this goal, we took a part of bandwidth, which is not used for the transmission of video signals in the established frequency bandwidth, and used it for the transmission and receiver and a automatic distributive system. We developed an information management system for the 9600bps CATV using RS-232 of forward/backward communication and backward communication. Based on window, It consist of ID generation, transmitter/receiver, control and backup part.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.591-598
• /
• 2016

The final step of driving a car is parking, which is the most difficult part for people learning to drive. Parking in narrow parking spaces is difficult for both ordinary drivers and beginners. To solve this problem, the development of SPAS (Smart Parking Assist System), ACC (Automatic Control System) improves the convenience of drivers. In addition, parking assistance systems have been developed to recognize more accurately the surrounding environment to the driver using the ultrasound, camera, thermal camera, and radar. This paper proposes the reverse turning radius to process images as if the camera is located in the center of the vehicle regardless of the actual camera position. In addition, it generates the parking guidelines through verification using the vehicle.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.1404-1407
• /
• 2007

본 논문에서는 객관식 문항을 난이도에 따라 자동으로 생성하는 방법을 고안하여, 학습자 수준에 적합하도록 다양하고 동적인 형태로 문항 제시를 할 수 있는 시스템을 제안하였다. 이를 위해서는 주어진 문장에서 형태소 분석을 통해 키워드를 추출하고, 각 키워드에 대하여 워드넷의 계층적 특성에 따라 의미가 유사한 후보 단어를 제시한다. 의미 유사 후보 단어를 제시할 때, 워드넷에서의 어휘간 유사도 측정 방법을 사용함으로써 생성된 문항의 난이도를 사용자가 원하는 수준으로 조정할 수 있도록 하였다. 단어의 의미 유사도는 동의어를 의미하는 수준 0에서 거의 유사도를 찾을 수 없는 수준 9 까지 다양하게 제시할 수 있으며, 이를 조절함으로써 문항의 전체 난이도를 조절할 수 있다. 후보 어휘들의 의미 유사도 측정을 위해서, 본 논문에서는 두 가지 방법을 사용하여 구현하였다. 첫째는 단순히 두 어휘의 워드넷 상에서의 거리만을 고려한 것이고 둘째는 두 어휘가 워드넷에서 차지하는 비중까지 추가적으로 고려한 것이다. 이러한 방법을 통하여 실제 출제자가 기존에 출제된 문제를 토대로 보다 다양한 내용과 난이도를 가진 문제 또는 문항을 보다 쉽게 출제하게 함으로써 출제에 소요되는 비용을 줄일 수 있었다.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.175-180
• /
• 1998

Nd:YAG single crystal widely used as solid state laser was grown by Czochralski method. <111> single crystal with 0.9at% of $Nd^{3+}$ was grown from the Czochralski furnace with a automatic diameter control system. The vertical temperature gradient in the liquid was the major factor that influence the crystal quality, and the crystal diameter was controlled by the home made computer program. The crystal boule with $\phi$50mm$\times$ι100mm effective size was cut, polished, and antireflection coated. The optical evaluation such as absorption spectrum, fluorescence spectrum coincide with typical features of Nd:YAG single crystal. The laser rod was assembled into the CW laser generator with a Kr lamp. The maximum CW laser output was 70 W and the threshold power and efficiency was 1.3kW and 1.64% respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.5
• /
• pp.1082-1088
• /
• 2003

This study is about the development of a system related to the CATV network. It intends to develop an automatically centralized Headend system and a distributive system to remove the ineffectiveness of the established manual system. To achieve this goal, we took a put of bandwidth, which is not used for the transmission of video signals in the established frequency bandwidth, and used it for the transmission and receiver of controlling signals. By this way we could design a system of transmission and receiver and a automatic distributive system. We developed an information management system for the 9600bps CATV using RS-232 of forward/backward communication and backward communication. Based on window, It consist of ID generation, transmitter/receiver, control and backup part.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.3
• /
• pp.53-58
• /
• 2006

This study deals with the method of post-processing in the automatic tool path generation for 5-axis NC machining. The 5-axis NC machining cannot only cope with the manufacturing of complicated shapes, but also offers numerous advantages such as reasonable tool employment, great reduction of set-up process and so on. Thus 5-axis NC machining has been used for aircraft parts, mold and die as well as for complicated shapes such as impeller, propeller and rotor. However, most of the present CAM systems for 5-axis NC machining have limited functions in terms of tool collision, machine limits and post-processing. Especially 5-axis machine configurations are various according to the method which the rotational axes are adapted with the table and spindle. For that reason, In many cases the optimal numerical control (NC) data cannot be obtained or considerable time is consumed. To solve this problem, we applied a general post-processor for 5-axis NC machining. The validity of this post-processor should be experimentally confirmed by successfully milling to a helix shaped workpiece.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2007.09a
• /
• pp.89-93
• /
• 2007

The Boil-off gas (BOG) generation during the voyage is inevitable since Natural Gas (NG) in normally liquefied below -160 degree C in atmosphere condition and small heat ingress due to relatively hot outside keeps evaporating continuously. The one of major issue in LNG carriers is to handle generated BOG from cargo tank. The generated BOG affects to increase the cargo tank pressure and Gas Management System (GMS) for LNG carriers is closely related to cargo tank pressure maintenance. Economically, BOG is generally used as fuel in LNG carrier. Newly developed GMS for LNG carrier in boiler propulsion system, VaCo System, not only accomplish automatic control in GMS but also ensure safer operation.