• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.453-459
• /
• 2020

It is important to increase the probability that all developed weapon systems can be operated in a steady state at any time. In the case of Integrated Logistics Support, this probability is referred to as operational availability, and the numerical value is quantified during the development process. There are several ways to improve operational availability for successful development of weapon systems. One of the methods is to reduce total corrective maintenance time through Automatic Test Equipment(ATE). Recently, customers in the defense market have become aware of this and demand ways to improve operational availability of weapon systems. Therefore, this paper proposes ways to improve operational availability of weapon systems by changing the method of operating the ATE. The detailed method is to allow field maintenance personnel to carry out field maintenance support onsite. This is an effective way to reduce the total corrective maintenance time of weapon systems by reducing the travel time of field maintenance personnel. The proposed ATE is proved to be able to achieve superior maintenance and operational availability.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.26 no.1
• /
• pp.73-84
• /
• 2020

Purpose: Though Korean healthcare services have been upgraded, infection and fire had been broken out in general hospitals. And higher concerns about quality assessment made it to clinical laboratory design guideline studies. So, this study investigates the facilities, equipment and personnel of laboratory medicine focusing on more than five hundred fifty bed hospital, and contributes to make guidelines for safety and efficiency in lab. Methods: Questionnaires to supervisor technologist and field surveys to medical laboratories in korean hospitals have been conducted for the data collection. 16 answers have been analysed statistically by MS Excel program. Results: Most of the sample tests such as hematology, clinical chemistry, immunology, transfusion, urinalysis, microbiology and molecular diagnosis are performed by more than 80% in large sized general hospital laboratory. In the test methods, automatic analyzers are used up to 80%, total laboratory automation up to 43% in clinical chemistry and immunology, and manual tests in all sorts of the test. There are placed in single lab or two and three labs above the ground, which are all in semi-open lab. There is some correlation with the number of specimens and the number of lab people depending on the number of hospital beds. Laboratory environment shows that work distance is good, but evacuation path width, visibility, separation of staff area from automatic analyzer, and equipment installations are needed to have more spaces and gears. Most of the infection controls are equipped with mechanical ventilation, air-conditioning, washbasin and wastewater separation, BSC installation and negative pressure lab room. Implications: Although the laboratory space area is calculated considering the number of hospital beds, type of tests and number of staff, hospital's expertise and the samples numbers per year should be taken into account in the planning of the hospital.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.4
• /
• pp.9-16
• /
• 1999

We suggest the image recognition algorithm for automatic decision of EUT malfunction using computer vision in the radiant electromagnetic field. We monitor and analyze the EUT malfunction through the numerical value change of electro-measurement and medical instruments, or the image distortion of PC monitor. We could decide EUT malfunction by comparing the object image in the electromagnetic field with the reference image or by recognizing the numerical value change on the video camera monitor. We can show the evidence of EUT malfunction decision and reduce the possibility of malfunction in the tolerance test.

• Korean Journal of Environment and Ecology
• /
• v.29 no.2
• /
• pp.174-183
• /
• 2015

We have conducted a verification test of correlation between bird community indices and bird sound recording results in order to use the equipment which deals with the automatic sound collecting system, the song meter. The study areas include four sites which are Gombaeryoung and Zochimryoung in Jeombongsan Mountain and Jookryoung and Gochiryoung in Sobaeksan National Park. We collected the bird sound data five times using a sound recorder and field survey results in the same place of the study site. As a result of the sound recording from the field survey, the species recorded by three researchers of sound analyst include common resident species or species which have a relatively conspicuous call and song. On the contrary, the species recorded by only one researcher are a relatively rare or inconspicuous species or was familiar with the personal experiences of each researcher. The number of species recorded by only one researcher totaled fourteen species (36.8 %), and that of two researchers totaled twelve species (31.6 %), and that of three researchers totaled twelve species (31.6 %). The correlations of the number of species among three researchers was not significant in some results, but the sum or maximum count of the number of species was useful to estimate a significant correlation between the result of researchers and the indices of field surveys. As a result of correlation analysis by using sound recordings, the maximum number of species among the three researchers significantly correlated with the number of species, the species diversity index and the species abundance index in the field survey at the same site, however it did not correlate with the number of individuals and species evenness index. As a result of sound analysis collected from the stationary sound recording system; song meter, the number of frequencies in bird songs and calls correlated with the number of species in the field survey at the same site. The number of calls and songs decreased as time went by. Finally, we could test the active time range and change the activity strength by using a sound recording system. In particular, that sound recording system is able to collect data in same time and site, so it is expected so that the equipment not only replenish a shortage of researchers and survey periods in field research in a short term monitoring survey, but also be able to acquire statistical objectivity.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.1209-1214
• /
• 2009

Various automatic temperature control systems have been used widely in Korea for the conservation of heating energy and the enhancement of thermal comfort in residential buildings. But the heating control performance for automatic temperature control systems extensively vary with the design and operational conditions of the heating system, the climate condition and others. It was introduced in this study a numerical calculation program package to analyze heating control characteristics of the automatic temperature control system. This package is able to analyze the room air temperature, return water temperature, supplied heating flux and flow rate, and so on. One the other hand, the simulation results were verified by comparing with the field test results.

• Journal of the Korean Society of Safety
• /
• v.17 no.4
• /
• pp.94-100
• /
• 2002

As the use of automatic handling equipment for sensitive semiconductor devices is rapidly increased, manufacturers of electronic components and equipments need to be more alert to the problem of electrostatic discharges(ESD). In order to analyze damage characteristics of semiconductor device damaged by ESD, this study adopts a new charged-device model(CDM), field-induced charged model(FCDM) simulator that is suitable for rapid, routine testing of semiconductor devices and provides a fast and inexpensive test that faithfully represents ESD hazards in plants. High voltage applied to the device under test is raised by the field of non-contacting electrodes in the FCDM simulator, which avoids premature device stressing and permits a faster test cycle. Discharge current and time are measured and calculated. The characteristics of electrostatic attenuation of domestic semiconductor devices are investigated to evaluate the ESD phenomena in the semiconductors. Also, the field charging mechanism, the device thresholds and failure modes are investigated and analyzed. The damaged devices obtained in the simulator are analyzed and evaluated by SEM. The results obtained in this paper can be used to prevent semiconductor devices form ESD hazards and be a foundation of research area and industry relevant to ESD phenomena.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.4 s.23
• /
• pp.102-109
• /
• 2005

In this paper, we propose a new listen-in technique to overcome the problems and the shortcomings which could possibly meet in the previous listen-in methods to deal with the blind signal manually according to operator's decision. In the proposed listen-in method, receiving the signals, classifying the modulation types, and demodulating the signals can be done automatically without operator's intervention. We realize the listen-in technology by developing the high speed frequency tuner, the automatic modulation recognizer, and the signal demodulator. In conclusion, we confirm and show that the developed equipment has a good performance in classifying the modulation type through the computer simulation and the field test.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1168-1176
• /
• 2010

Currently drilling investigation and the SPT in parallel not only organization and peculation sincerity quality historian of test to be old the data was abundant with the site ground investigation test which is representative and the research of empirical formula in compliance with many scholar was accomplished and was come. The data which is like this wide is used with geotechnical engineering data of plan and space-time of the field which is various. SPT with tentative voluntary skillful degree record method of variety and technical expert of equipment, according to site conditional is consistent the quality of ground condition but cannot be made to show there is a tendency and specially the point whose is difficult actually accurately to follow the interval which decides in quality as a matter of tentative standard of drill and the test in parallel and a tentative method exists. From the research which sees consequently also the skill of variety and technical expert of equipment of SPT, strong point of the SPT automation logger will be able to complement the problem point of quality etc. of site condition under comparison analyzing should have been boiled about SPT of existing and tentative methods and N-value.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.427-432
• /
• 2005

This study treats the advantage of in situ line source method measuring the heat transfer capacity of a borehole, using mobile equipment, to determine the thermal properties of the entire borehole system such as thermal conductivity, diffusiveity. volumetric heat capacity, and borehole thermal resistance. The results from the response test include not only the thermal properties of the ground and the borehole, but also conditions that are difficult to estimate, e,g. natural convection in the boreholes, asymmetry in the construction, etc. In this study, 1) theoretical in situ methods for assessing working fluid temperature variation in V-type PE tube have been introduced, and 2) TRTE(Thermal Response Test Equipment) has been built based on these kinds of theoretical in situ methods. Basically TRTE consists of a pump, a heater and temperature sensors for measuring the inlet and outlet temperatures of the borehole. In order to make equipment easily transportable it is set up on a small trailer. Since the response test takes above two days to execute, the test was fully automatic in recording measured data using Labview DAS(Data acquisition system) program. The test was demonstrated in the course of intensive research in this field through the one site at Ulsan city in Korea. From this kind of thermal properties test of borehole systems in situ, the design of the borehole system can be optimized regarding the total geological, hydro-geological and technical conditions at the location.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.11
• /
• pp.27-37
• /
• 2007

Downhole seismic method is very economic and easy to operate because it uses only one borehole and simple surface source to obtain the shear wave velocity profile of a site. In this study, automatic shear wave source was developed for efficient downhole seismic testing. This source is motor-spring type and easy to control. It can lessen the labor of operator and the working time. Moreover, it can provide better and repetitive signals for data interpretation. By combining developed automatic source with automatic receiver system, PC based data acquisition system, advanced managing program, and semi-automatic downhole performing system were constructed. Through comparison test with manual source, advantages of automatic source were verified. Constructed semi-automatic downhole testing system including automatic shear wave source was applied to the soft soil site. The applicability and reliability were verified and the importance of automating testing system for obtaining reliable result was emphasized.