• Transactions of Materials Processing
• /
• v.23 no.2
• /
• pp.95-102
• /
• 2014

The under-drive brake piston is an important component in automotive transmissions. It changes the velocity by controlling the gear ratio. It has been traditionally manufactured by hot forging. Recently, there has been an effort to replace this traditional manufacturing method with cold forging in order to improve the dimensional accuracy and decrease the surface roughness. Cold forging uses a smaller amount of initial material and also has a shorter cycle time since the forged surface can be the final surface without the need of post-processing such as machining or grinding. In the current study, finite element analysis was conducted to evaluate a process design using an initial plate with reduced thickness. This smaller thickness decreases the amount of material needed for the part as well as the machining to produce the final product.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.1
• /
• pp.47-52
• /
• 2004

This paper presents a CMOS optical receiver design featuring wide input dynamic range and low bit error rate suitable for FTTH application. We achieved 60dB input dynamic range for up to 100Mbps by controlling the PMOS feedback resistance of transimpedance preamplifier according to its output signal level. Auto-bias circuit is designed in current mirror configuration to minimize duty error. Circuit simulation has been performed using 2-poly, 3-metal, 0.6um CMOS process parameters. The designed receiver consumes less than 130mW at 100Mbps with 5V power supply.

• Journal of Industrial Technology
• /
• v.20 no.A
• /
• pp.257-267
• /
• 2000

It was difficult to apply conventional excavation methods in some sections from Seoul to Pusan high speed rail road construction of 1 lot 2, due to highway concrete road, gas pipe, water pipe and nearby factories with automatic control system machine. To excavate safely and efficiently in these sections new blast patterns were employed within allowable blast vibration level, by test blast and controlled vibration by sequential blast. Behaviors of the rock mass including convergence and displacement around tunnel were measured with construction works and the crack width in concrete wall was also monitored for controlling allowable limits. The results can be summarized as follow : 1. The allowable blast vibration level in structure site is less 1.0cm/sec for highway concrete, 0.5 cm/sec for gas pipe, water pipe and building housing and 0.3 cm/sec for automatic control system machine. 2. The convergence displacement, single rod extensometer and multi rod extensometer around tunnel and cracks in concrete wall were measured, it was confirmed that the measured values were converged within allowable level. 3. The empirical formular of ground vibrations with 90% confidence lines for PD-3 was given as follow. $$V_{90%}=45.549({\frac{D}{\sqrt{W}}})^{-1.353}$$

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.3
• /
• pp.36-44
• /
• 2013

This study is focused on the debarking and xylem separation yield of Paper Mulberry. We investigated the most efficient manual on the automatic debarking and xylem separator machine. The bast tissues of Paper Mulberry were separated in three layers including black outer layer, green inner layer, and white inner layer. A target is to save the white inner layer of these three layers as much as possible. The experimental machine most characterize xylem separation and debarking by frictional force between the bulges and Paper Mulberry by the drum rotation. It is possible automatically to operate the machine by controlling the temperature sensor and the time. Debarking process can be know that removed black outer layer has beem accumulate and measured the weight. The content of the extract, holocellulose, lignin and ashes of the white inner layer was analyzed. It is result that conditions of optimum process of the experimental machine is 45 RPM, temperature at $60^{\circ}C$(60 min.) and $80^{\circ}C$(60 min.), mixing bulge of 10 mm(120ea) and 30 mm(120ea) and capacity of Paper Mulberry 10 kg.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.2
• /
• pp.63-70
• /
• 2003

In this paper, an MFC (Mass Flow Controller) which is widely used in many semiconductor manufacturing processes for controlling the mass flow rate of a gas is designed and implemented using the PIC 16F876 of Microchip, Inc. The MFC implemented in this thesis has the form of hybrid-type, i.e., the mixed-type of the analog-type MFC, which has many problems such as low accurary, and digital-type MFC, which use an expensive DSP (Digital Signal Processor) and an ADC (Analog to Digital Convertor) with high precision. The MFC is consists of the sensor unit, the control unit and the actuator unit, and it has used the automatic calibration algorithm and the reference table method for the improvement of the performance.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.09a
• /
• pp.439-442
• /
• 2003

In order to solve the difficulties of parameter settings in SA algorithm, an improved practical SA algorithm is proposed by employing the threading techniques, appropriate software structures, and dynamic adjustments of temperature parameters. Threads provide a mechanism to realize a parallel processing under a disperse environment by controlling the flux of internal information of an application. Thread services divide a process by multiple processes leading to parallel processing of information to access common data. Therefore, efficient search is achieved by multiple search processes, different initial conditions, and automatic temperature adjustments. The proposed are methods are evaluated, for three types of Traveling Salesman Problem (TSP) (random-tour, fractal-tour, and TSPLIB test data)are used for the performance evaluation. The experimental results show that the computational time is 5％ decreased comparing to conventional SA algorithm, furthermore there is no need for manual parameter settings. These results also demonstrate that the proposed method is applicable to real-world vehicle routing problems.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1531-1531
• /
• 2001

A novel technique has been developed to observe the three-dimensional (3-D) distribution of chemical components in biological materials using both automatic sectioning microtome and infrared microscope. The 3-D image was reconstructed based on the relationship between the content and the absorbancy of specified wavelength for chemical components. By using the automatic sectioning microtome, the kernel of rice sample fixed in paraffin was sequentially sliced with the thickness of $5\;\mutextrm{m}$ after pasting the sliced sectional specimens on an adhesive tape. The chemical components of the specimens, which are placed on the X-Y controlling stage with positioning accuracy of ${\pm}10\;\mutextrm{m}$, were analyzed by the infrared microscope. The 3-D images demonstrated that the zonal protein about $200\mutextrm{m}$ in width was observed mainly at the outer parts of a rice particle, and carbohydrates entirely. These images can be observed by choosing arbitrary observation angle. The result indicated that the developed technique could be applied 3-D information to investigate intrinsic chemical components but also residual pesticides as well as bacteria contamination for agricultural produce.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.7
• /
• pp.3164-3168
• /
• 2011

In this paper, the aging of Farm Village in the automatic control system for Vinylhouse with Zigbee short-range wireless interface, the environment, crops grown according to DB, and Vinylhouse controlled environment to identify abnormalities by monitoring the Vinylhouse, regardless of the number of from one server to multiple clients while controlling two-way monitoring system is to perform. Therefore, router, end with a random ID to determine the status of certain Vinylhouse and Vinylhouse, allowing for independent control of Vinylhouse, certain characteristics of a live user wants to control was designed to allow real-time.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.57.2-57.2
• /
• 2018

In astronomical observation, sequential device control and real-time data processing are important to maximize observing efficiency. We have developed series of automatic observing software (KAOS, KHU Automatic Observing Software), e.g. KAOS30 for the 30 inch telescope in the McDonald Observatory and KAOS76 for the 76 cm telescope in the KHAO. The series consist of four packages: the DAP (Data Acquisition Package) for CCD Camera control, the TCP (Telescope Control Package) for telescope control, the AFP (Auto Focus Package) for focusing, and the SMP (Script Mode Package) for automation of sequences. In this poster, we introduce KAOS10 which is being developed for controlling a small telescope such as aperture size of 10 cm. The hardware components are the QHY8pro CCD, the QHY5-II CMOS, the iOptron CEM 25 mount, and the Stellarvue SV102ED telescope. The devices are controlled on ASCOM Platform. In addition to the previous packages (DAP, SMP, TCP), KAOS10 has QLP (Quick Look Package) and astrometry function in the TCP. QHY8pro CCD has RGB Bayer matrix and the QLP transforms RGB images into BVR images in real-time. The TCP includes astrometry function which adjusts the telescope position by comparing the image with a star catalog. In the future, We expect KAOS10 be used on the research of transient objects such as a variable star.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.2
• /
• pp.160-164
• /
• 2022

In this paper, through the development of a smart panel (LCD kiosk) controller, contents to develop a system that can be operate in a desired environment by operating the window control and ventilation facilities according to the automatic controller operation based on the set values such as temperature, humidity, sunlight, and rainfall. In particular, the MQTT protocol-based sensor module can be directly manufactured and applied at any time based on various communication and power sources such as wireless, wired, and PLC (power line communication) to obtain the desired data, as well as fire, power failure, and intrusion in the house. It is also a system that enables operation and monitoring from a remote location based on the cloud environment by connecting sensors. Kiosks are currently being used in many places, and the demand for them is on the rise, and an active influx of young people can be expected through environmental improvement. It is expected to increase interest and understanding for improvement.