• Journal of Intelligence and Information Systems
• /
• v.28 no.2
• /
• pp.263-278
• /
• 2022

With the recent advent of IoT technology, automatic pet feeders are being distributed so that owners can feed their companion animals while they are out. However, due to behaviors of pets, the method of measuring weight, which is important in automatic feeding, can be easily damaged and broken when using the scale. The 3D camera method has disadvantages due to its cost, and the 2D camera method has relatively poor accuracy when compared to 3D camera method. Hence, the purpose of this study is to propose a deep learning approach that can accurately estimate weight while simply using a 2D camera. For this, various convolutional neural networks were used, and among them, the ResNet101-based model showed the best performance: an average absolute error of 3.06 grams and an average absolute ratio error of 3.40%, which could be used commercially in terms of technical and financial viability. The result of this study can be useful for the practitioners to predict the weight of a standardized object such as feed only through an easy 2D image.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.26 no.2
• /
• pp.61-69
• /
• 2020

As post-harvest processes of onions are carried by a 20 kg-net package which results in high-cost and low-efficiency, especially, the insufficient drying and physical damage of onions after harvesting leads to a huge second loss in storage, we had developed a low-cost, high-efficiency post-harvest bulk handling machinery system by collecting onions on a farm using ton-bags, drying with forced air circulation, and sorting/packaging. The post-harvest bulk handling machinery system consisted of 6 devices, and this study designed an automatic feed hopper with a feeding rate control device, an inclined belt conveyor with a two-step chute, and an automatic pallet unloading device for feeding onions into the sorting/packing line. This study also analyzed the performance and control of the total system. The device had 1-ton handling capacity, but the operational condition was set to increase the capacity. The three-step filling method of pallet by the velocity control of the inclined belt conveyor was applied in the post-harvest bulk handling machinery system for the prevention of physical damage. If one worker was set to operate the total system, the time required to complete one palletized load was approximately 5 minutes and 5 seconds. The calculated daily handling capacity was approximately 94 tons, when the daily actual working time was 8 hours. When the developed system was applied to the managerial size of 2,000 ton, the processing cost per ton of the system was decreased by 19.5%, compared with the existing 20 kg-net package-based handling. The developed post-harvest bulk handling machinery system would be a good substitute for the rapid decline and aging of rural labor.

• Journal of Biosystems Engineering
• /
• v.13 no.2
• /
• pp.38-45
• /
• 1988

This study was intended to develop the system automatically controlling travel direction of combine by means of sensing paddy rows. The control system was composed of three detecting levers having different length, micro-switch, microcomputer and electro-hydraulic control system. Sensor and control system developed was tested to estimate optimum design values and its actual performance as installed in combine. The computer simulation and performance test at simulated and actual field were conducted to test for possibility of practical use. The results of the study arc summarized. as follows: 1. The travel traces of combine hiving the conventional sensor with 2 levers and the new sensor detecting the slope of paddy rows were compared through computer simulation. Turning frequency of combine having new sensor was fewer than that of conventional sensor, but the rate of turning for the combine with new sensor was much greater than that of conventional sensor. 2. As sensor was established behind the tip of divider, the sensor itself well followed paddy rows but the tip of divider did not, resulting in divider being deviated from paddy rows. It was analyzed that the sensor should be attached closer to the tip of divider to have a better performance of the control system. 3. The greater the length of sensor lever for given location of sensor attachment and combine forward speed, the higher sensitivity of turning in control system. Moreover, increasing combine speed resulted in a worse performance of control system following paddy rows. Consequently, it was necessary that an optimum length of sensor attachment and for the range of combine operational speed. 4. Field test of combine installed with the sensor and electro-hydraulic system developed in this study showed that it may be operated smoothly and well behaved to paddy rows to 4th gear of combine speed which was 59cm/s. Consequently. it was concluded that the combine with the guidance control system developed in this study may be successfully used for paddy combining.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.961-967
• /
• 2007

Automatic water feeding system for chickens is the one of the most important devices at poultry farms. Chickens drink water directly from a water feeder nipple of the automatic water feeder. Check valve inside the water feeder nipple is open when they drink water and is closed otherwise. There are two types of nipples. One is the piston nipple, and the other is the ball nipple. Because the nipple stick in the ball nipple can move freely, the sloping mechanism of the ball nipple works well. but it has complicated mechanism. On the other hand, the piston nipple has very simple structure, but its movement is limited so it can move only up-and-down. To overcome those limitation, the piston nipple with sphere valve seat face (sphere face piston nipple) has been developed and is just distributed at domestic markets. The experimental performance test of the commercialized sphere piston nipple has been conducted, and compared with the performance of the ball nipple and the piston nipple which are domestic products. As the result, sphere piston nipple shows excellent performance compared to that of the piston nipple but its performance is similar to ball type nipple.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.1108-1111
• /
• 2009

Auto Pilot is the system which move automatically the vessel through locating operation mode to automatic after entering operating course using a electronic chart or plotter. And water jet is the a propulsion system that make a power to push the vessel through spouting the accelerated water which is absorbed by the hole in the bottom of vessel. The water jet receive the effect of the depth of water lowly, it's acceleration efficiency is higher under high speed and have an advantage on vibrating and floating sound, so it's demand is increasing as new propulsion system. However, the signal systems of auto pilot and water jet are different, we need the system to interface between each system. We designed the interface that efficiently digital feed back control embedded module between auto pilot and water jet system in this paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.649-652
• /
• 2007

Recently, it is increasing the interest in previous web and web 2.0 which mean differentiation. The previous system is typical Static web based on client and server model, while web 2.0 mean next generation web which web change and evolve fundamentally. In this paper, I suggest that the module on RSS reader available under web 2.0 standards. A currently used RSS feed do correct the part distortion which can be possible resolve the encoding problem of Hanguel and third-world language. The suggested module is implemented using Ajax. I developed the module for the use of effective contents on web 2.0 through the DragBox module based on the programming on mobility of Ajax and the design and implementation of automatic update module of RSS feed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.7
• /
• pp.1263-1270
• /
• 2008

Recently, it is increasing the interest in previous web and web 2.0 which mean differentiation. The previous system is typical Static web based on client and server model, while web 2.0 mean next generation web which web change and evolve fundamentally. In this paper, I suggest that the module on RSS reader available under web 2.0 standards. A currently used RSS feed do correct the part distortion which ran be possible resolve the encoding problem of Hanguel and third-world language. The suggested module is implemented using Ajax. I developed the module for the use of effective contents on web 2.0 through the DragBox module based on the programming on mobility of Ajax and the design and implementation of automatic update module of RSS feed.

• Asian-Australasian Journal of Animal Sciences
• /
• v.27 no.3
• /
• pp.422-430
• /
• 2014

Pasture-based automatic milking systems (AMS) require cow traffic to enable cows to be milked. The interval between milkings can be manipulated by strategically allocating pasture. The current experiment investigated the effect of replacing an allocation of grazed pasture with grazed soybean (Glycine max) with the hypothesis that incorporating soybean would increase voluntary cow traffic and milk production. One hundred and eighty mixed age, primiparous and multiparous Holstein-Friesian/Illawarra cows were randomly assigned to two treatment groups (n = 90/group) with a $2{\times}2$ Latin square design. Each group was either offered treatments of kikuyu grass (Pennisetum clandestinum Hoach ex Chiov.) pasture (pasture) or soybean from 0900 h to 1500 h during the experimental period which consisted of 2 periods of 3 days following 5 days of training and adaptation in each period with groups crossing over treatments after the first period. The number of cows trafficking to each treatment was similar together with milk yield (mean ${\approx}18$ L/cow/d) in this experiment. For the cows that arrived at soybean or pasture there were significant differences in their behaviour and consequently the number of cows exiting each treatment paddock. There was greater cow traffic (more cows and sooner) exiting pasture allocations. Cows that arrived at soybean stayed on the allocation for 25% more time and ate more forage (8.5 kg/cow/d/allocation) relative to pasture (4.7 kg/cow/d/allocation). Pasture cows predominantly replaced eating time with rumination. These findings suggest that replacing pasture with alternative grazeable forages provides no additional incentive to increase voluntary cow traffic to an allocation of feed in AMS. This work highlights the opportunity to increase forage intakes in AMS through the incorporation of alternative forages.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.363-366
• /
• 2003

We propose the system that automatically adjusts the white balance on display products to a standard value according to several nations. We replace manual or semi-auto method with fully automatic method using windows application program. And we use RS-232C serial interface to communicate PC with display products which we want to adjust white balance. The PC generates patterns for measuring color information and Color Analyzer measures color and brightness. This value is transmitted through RS-232C serial interface to PC. The PC's algorithm analyzes this information and then decides which RGB Gain value is best for optimal white balance. This RGB Gain value is transmitted through RS-232C serial interface to display products. The modified color value is measured again and feed back to PC. This sequence is repeated until optimum white balance is obtained.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.107-112
• /
• 2003

The recent machine tools are requested so high-quality processing and productivity increasing. Therefore, it is so necessary to develop technology for high-speed and high-precision. This thesis touches on the development of high speed and intellectual line center. At first, the line center is necessary that strong structure, compact structure and light weight design for high-speed processing and transfer. So, it is necessary that examination of new materials and structures for light-weight and control devices for precision processing. So, it is going to make mention of the process of 1st model production for the above-mentioned based on test model production and evaluation.