• KIPS Transactions on Software and Data Engineering
• /
• v.8 no.12
• /
• pp.507-516
• /
• 2019

Costs invested in road maintenance and road development are on the rise. However, due to accidents such as portholes and ground subsidence, the risks to the drivers' safety and the material damage caused by accidents are also increasing. Following this trend, we have developed a system that determines road damage, according to the magnitude of vibration generated without directly intervening the driver when driving. In this paper, we implemented the system using a remote control car (RC car) simulator due to the limitation of the environment in which the actual vehicle is not available in the process of developing the system. In addition, we attached a vibration sensor and GPS sensor to the body of the RC car simulator to measure the vibration value and location information generated by the movement of the vehicle in real-time while driving, and transmitting the corresponding data to the server. In this way, we implemented a system that allows external users to check the damage of roads and the maintenance of the repaired roads based on data more easily than the existing systems. By using this system, we can perform early prediction of road breakage and pattern prediction based on the data. Further, for the RC car simulator, commercialization will be possible by combining it with business in other fields that require flatness.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.1
• /
• pp.14-26
• /
• 2019

For bus drivers' safe driving, a policy that analyzes the causes of the drivers' traffic accidents and then assists their safe driving is required. Therefore, the Ministry of Land, Infrastructure and Transport set up its plan to gradually expand the equipping of commercial vehicles with FCWS (Forward Collision Warning System) and LDWS(Lane Departure Warning System), from the driver-supporting ADAS(Advanced Driver Assistance Systems). However, there is not much basic research on the analysis of bus drivers' traffic accidents in Korea. As such, the time is appropriate to research what is the most necessary ADAS for bus drivers going forward to prevent bus accidents. The purpose of this research is to analyze how serious the accidents were in the different bus routes and whether the accidents were repetitive, and to give recommendations on how to support ADAS for buses, as an improvement. A model of ordered logit was used to analyze how serious the accidents were and as a result, vehicle to pedestrian accidents which directly affected individuals were statistically significant in all of the models, and violations of regulations, such as speeding, traffic signal violation and violation of safeguards for passengers, were indicated in common in several models. Therefore, the pedestrian-sensor system and automatic emergency control device for pedestrian should be installed to reduce bus accidents directly affecting persons in the future, and education for drivers and ADAS are to be offered to reduce the violations of regulations.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.3
• /
• pp.1-9
• /
• 2005

In this paper, an operation algorithm and a performance simulator are developed for a 42-volt ISG vehiclewhich consists of 5 kW ISG, 2500cc IC engine, torque converter and 4 speed automatic transmission. Modularapproach using MATLAB Simulink is used to construct a dynamic model of the vehicle powertrain which is obtainedfrom each component such as engine, battery, ISG, torque converter, etc.. An operation strategy for a 42-volt ISG vehicle including the function such as engine idle stop and regenerative braking is proposed. Performance simulator is developed based on the dynamic models of the powertrain. It is found from the simulation results that fuel economy can be improved as much as 6 percent for FTP75 driving cycle mostly owing to the engine idle stop.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.115-121
• /
• 2017

In this paper, the intelligent vision system for an effective and intelligent path-planning of an industrial AGV system based on stereo camera system is proposed. The depth information and disparity map are detected in the inputting images of a parallel stereo camera. The distance between the industrial AGV system and the obstacle detected and the 2D path coordinates obtained from the location coordinates, and then the relative distance between the obstacle and the other objects obtained from them. The industrial AGV system move automatically by effective and intelligent path-planning using the obtained 2D path coordinates. From some experiments on AGV system driving with the stereo images, it is analyzed that error ratio between the calculated and measured values of the distance between the objects is found to be very low value of 2% on average, respectably.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.1
• /
• pp.1-7
• /
• 2013

Pneumatic cylinders are widely used to actuators in automatic equipments because they are relatively inexpensive, simple to install and maintain, offer robust design and operation, are available in a wide range of standard sizes and design alternatives. This paper presents a comparative study among the dynamic characteristics of meter-out and meter-in speed control of pneumatic cushion cylinders with a relief valve type cushion mechanism. Because of the nonlinear differential equations and a requirement for simultaneous iterative solution in a mathematical model of a double acting pneumatic cushion cylinder, a computer simulation is carried out to investigate pressure, temperature, mass flow rate in cushion chamber and displacement and velocity time histories of piston under various operating conditions. It is found that the piston velocity and pressure response in meter-in speed control are more oscillatory than with meter-out those when pneumatic cushion cylinders are driven at a high-speed. In meter-out speed control, the effective area of the flow control valve is larger than that of meter-in, and the supply pressure has to be much higher than the pressure required to move the load because it has also to overcome the back pressure in cushion chamber.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.6
• /
• pp.119-126
• /
• 2003

This paper presents an algorithm of automatically finding magnitude of each maintenance index regarding step response characteristic for speed control system of driving roller in rolling process. For speed response data with noise, we distinguished possible cases that the number of maximum values is 2 or more into three separate types. Also, we suggested a way of selecting a candidate for reasonable maximum overshoot in each type and developed a decision algorithm of checking whether a candidate chosen is correct maximum overshoot. In terms of two types of test, we showed that magnitude and position in time axis of maximum overshoot can be found well via such algorithm presented in this paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.591-598
• /
• 2016

The final step of driving a car is parking, which is the most difficult part for people learning to drive. Parking in narrow parking spaces is difficult for both ordinary drivers and beginners. To solve this problem, the development of SPAS (Smart Parking Assist System), ACC (Automatic Control System) improves the convenience of drivers. In addition, parking assistance systems have been developed to recognize more accurately the surrounding environment to the driver using the ultrasound, camera, thermal camera, and radar. This paper proposes the reverse turning radius to process images as if the camera is located in the center of the vehicle regardless of the actual camera position. In addition, it generates the parking guidelines through verification using the vehicle.

• Korean Management Science Review
• /
• v.22 no.1
• /
• pp.15-26
• /
• 2005

The bootstrap is a method of computational inference that simulates the creation of new data by resampling from a single data set. We propose a new job for the bootstrap: generating inputs from one historical trace using Threshold Bootstrap. In this regard, the most important quality of bootstrap samples is that they be functionally indistinguishable from independent samples of the same stochastic process. We describe a quantitative measure of difference between two time series, and demonstrate the sensitivity of this measure for discriminating between two data generating processes. Utilizing this distance measure for the task of generating inputs, we show a way of tuning the bootstrap using a single observed trace. This application of the threshold bootstrap will be a powerful tool for Monte Carlo simulation. Monte Carlo simulation analysis relies on built-in input generators. These generators make unrealistic assumptions about independence and marginal distributions. The alternative source of inputs, historical trace data, though realistic by definition, provides only a single input stream for simulation. One benefit of our method would be expanding the number of inputs achieving reality by driving system models with actual historical input series. Another benefit might be the automatic generation of lifelike scenarios for the field of finance.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.13 no.4
• /
• pp.113-117
• /
• 2007

The study was performed on the development of system in which the bead width can be controlled. In order to control the bead width, we designed the automatic seam tracking device by attaching the probe type strain gauge sensor, motor driving slide and encoder to check the moving distance, and interface card connected MCU(80Cl96KC) upside the speed controllable carriage. Seam tracking experiments were done by changing the bead width. We compared and analyzed the sampling data which were obtained by output voltage of strain gauge sensor and rotary encoder pulse every 50ms.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.2
• /
• pp.92-97
• /
• 2011

Vehicle lightings are very important for safe driving during night time. Since the eye recovery time after an exposure to oncoming headlights would take after several seconds, the aiming point of vehicle head lamps have to pass safety requirements. Despite the fact that vehicle inclination is variable with vehicle load conditions, the head lamps aiming point is usually fixed at a constant position which is set by car manufacturer. Consequently, vehicle head lamps under varying load conditions often make people in the opposing vehicle uncomfortable, and even worse, can cause an accident. This paper presents an active vehicle lighting mechanism to automatically adjust its aiming point, or cut-off line, in order to compensate the change in vehicle inclination resulting from load variations. The effectiveness of the proposed method is demonstrated through a set of simulations and experiments with a real vehicle.